Download 800 kVA - 1153 Amps per phase

MODEL : PP 800 SP
Powered by:
GENERATING SET PERFORMANCE
50Hz
VOLTAGE
V400
PHASES
Three
PRIME RATED POWER
800kVA
STANDBY RATED POWER
900kVA
POWER FACTOR
0.80 PF
FUEL USAGE @ 75%
130.0 L/hr
60Hz
ENGINE
ENGINE
PERKINS
4006-23TAG3A
PERFORMANCE
50Hz
60Hz
BASELOAD RATED POWER
TBA
PRIME RATED POWER
760KWm
STANDBY RATED POWER
795KWm
FUEL CONSUMPTION
172 L/hr @ 100%
130 L/hr @ 75%
90 L/hr @ 50%
TYPE
Diesel 4 stroke
ASPIRATION
Turbocharged and air to air charge
INJECTION TYPE
Direct injection
ENGINE GOVERNOR
Electronic governor
CYLINDERS AND ARRANGEMENT
Six in line
BORE AND STROKE
160mm x 190mm
COMPRESSION RATIO
13.6 : 1
ELECTRICAL SYSTEM VOLTAGE
24 volt
BATTERY TYPE
Lead acid, 24V
DERATING FOR TEMPERATURE
40deg C
DERATING FOR ALTITUDE
1000m
DERATING FOR HUMIDITY
90%
ALTERNATOR
ALTERNATOR
PERFORMANCE
STAMFORD
50Hz
MODEL
HCI634G
BASELOAD RATED POWER 40 deg C
760kVA
PRIME RATED POWER 40 deg C
810kVA
STANDBY RATED POWER 40 deg C
830kVA
STANDBY RATED POWER 27 deg C
860kVA
EFFICIENCY
94%
STANDARD WING CONNECTIONS
Star Delta
EXCITER
Separately excited by P.M.G
POLES
4 poles
PHASES
Three phases
WIRES
6 leads
VOLTAGE REGULATION
+/- 0.5%
INSULATION CLASS
Class H
ENCLOSURE
IP23
MAXIMUM OVERSPEED
150%
STANDARD AVR MODEL
MX341
OPTIONAL AVR MODEL
TBA
DERATING FOR TEMPERATURE
40 deg C
DERATING FOR ALTITUDE
1000mm
60Hz
DIMENSIONS
DIMENSIONS AND CAPACITY
STANDARD MODELS
SOUNDPROOFED TYPE
85dB(A)@ 1 metre
INTEGATED FUEL TANK
CAPACITY
WEIGHT
STANDARD OPTIONAL
KG
LENGTH
WIDTH
HEIGHT
11000kg
6100mm
2500mm
2700mm
950
GENERATOR SET EQUIPMENT
STANDARD MODELS







Heavy duty steel base frame
Pad type anti– vibration dampers
Integrated fuel tank, base mounted
Silencer industrial type (open skid type)
24V battery
Key start switch
Emergency stop button
TBA
DIMENSIONS
CONTROLLER
AUTOMATIC MODELS – EQUIPMENT
4 poles ABB circuit breaker, electronic control unit ComAp AMF25-NT control panel box key,
emergency stop button, water jacket heater, battery charger, anti condensation heater.
AUTOMATIC MODELS – PROTECTORS
Low oil pressure, low fuel level, overload, over/ under frequency, low voltage, over/ under battery
voltage, belt breakage.
AUTOMATIC MODELS – INSTRUMENTATION
Voltmeter, ammeter (3 phases), frequency meter, hour– meter, battery voltage, fuel level.
4000 Series
4006-23TAG3A
Diesel Engine – ElectropaK
760 kWm at 1500 rpm
795 kWm at 1800 rpm
Economic power
Individual 4 valve cylinder heads giving optimised gas flows
Unit fuel injectors ensure ultra fine fuel atomisation and hence controlled rapid
combustion
Commonality of components with other engines in the 4000 Series family for
reduced stocking levels.
Reliable power
The Perkins 4000 Series is a family of 6, 8,
12 and 16 cylinder diesel engines,
designed to address today's
uncompromising demands within the
power generation industry with particular
aim at the standby market sector.
Developed from a proven engine range that
offers superior performance and reliability.
The 4006-23TAG3A is a newly developed,
turbocharged and air-to-air charge cooled,
6 cylinder diesel engine offered with either
temperate or tropical cooling. Its premium
features and design provide economic and
durable operation as well as an exceptional
power to weight ratio, excellent load
acceptance and improved gaseous
emissions, plus the overall performance
and reliability characteristics essential to
the power generation market.
Engine Speed
(rev/min)
Type of
Operation
Developed and tested using the latest engineering techniques
Piston temperatures controlled by an advanced gallery jet cooling system
Tolerant of a wide range of temperature without derate
Perkins global product support is designed to enhance the customer experience
of owning a Perkins powered machine. We deliver this through the quality of our
distribution network, extensive global coverage and a range of Perkins supported
OEM partnership options. So whether you are an end-user or an equipment
manufacturer our engine expertise is essential to your success
Compact, clean and efficient power
Exceptional power to weight ratio and compact size give optimum power density
for easier transportation and installation
Designed to provide excellent service access for ease of maintenance
Engines to comply with major international standards
Low gaseous emissions that will satisfy the requirements of 1⁄2 TA Luft (1986)
Engine Power
Typical Generator
Output (Net)
Gross
Net
kVA
kWe
kWm
bhp
kWm
bhp
1500
Continuous Baseload
Prime Power
Standby (maximum)
640
800
900
512
640
720
566
705
786
759
945
1054
540
679
760
724
911
1019
1800
Continuous Baseload
Prime Power
Standby (maximum)
675
844
938
540
675
750
614
759
839
823
1018
1125
570
715
795
764
959
1066
The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS 5514/1.
Derating may be required for conditions outside these; consult Perkins Engines Company Limited.
Generator powers are typical and are based on an average alternator efficiency and a power factor (cos. θ) of 0.8.
Fuel specification: BS 2869: Part 2 1998 Class A2 or ASTM D975 D2. Lubricating oil: 15W40 to API CG4.
Rating Definitions
Baseload Power: Power available for continuous full load operation. No overload is permitted on baseload power.
Prime Power: Power available at variable load with a load factor not exceeding 80% of the prime power rating. There is no overload permitted on baseload power.
Standby Power: Power available in the event of a main power network failure up to a maximum of 500 hours per year of which up to 300 hours may be run continuously. Load factor may be up to 100% of standby
power. No overload is permitted.
All information in this document is substantially correct at time of printing and may be altered subsequently
Publication No. 1739/01/08 Produced in England ©2006 Perkins Engines Company Limited
4000 Series
4006-23TAG3A
Standard ElectropaK Specification
Air inlet
1,643 mm
1,706mm
3,027mm
2,955
mm
Mounted air filter
Fuel system
1,964mm
1,792 mm
Direct fuel injection system, fuel lift pump
Fuel cooler
Governing
2,414mm
2,342 mm
Heinzmann digital governor – governing to ISO 8528-5 Class G2
Lubrication system
Wet sump with filler and dipstick
Lubrication oil filters
Oil cooler with separate filter header
Engine Speed
Cooling system
Standby
Twin thermostats, water pump
System designed for ambients up to 35ºC or 50ºC
Radiator supplied loose incorporating air-to-air charge cooler
Electrical equipment
24 volt starter motor, 24 volt 70 amp battery charging alternator with
integral voltage regulator and activating switch
High coolant temperature switch
Low oil pressure switch
Flywheel and Housing
SAE J620 size 18 flywheel
SAE ‘0’ flywheel housing
Fuel Consumption
1500 rev/min
1800 rev/min
g/kWh
l/hr
g/kWh
l/hr
212
User’s Handbook and Parts Manual
Optional Equipment
Heavy-duty air cleaners – paper element with pre-cleaner
Changeover lubrication oil filter
Changeover fuel filter
Immersion heater with thermostat
Additional manuals
4 metre wiring harness
Tropical or temperate radiator kit
Temperate fan
Perkins Engines Company Limited
Peterborough PE1 5NA
United Kingdom
Telephone +44 (0)1733 583000
Fax +44 (0)1733 582240
www.perkins.com
All information in this document is substantially correct at time of printing and may be altered subsequently
Publication No. 1739/01/08 Produced in England ©2006 Perkins Engines Company Limited
230
224
Prime power
210
172
226
200
Baseload power
208
137
213
152
75% of prime
power
210
130
214
144
50% of prime
power
213
90
205
96
General Data
Number of cylinders
Cylinder arrangement
Cycle
Induction system
Literature
194
Combustion system
Cooling system
Bore and stroke
Displacement
Compression ratio
Direction of rotation
Firing order
Total lubrication system
capacity
Total coolant capacity
Length
Width
Height
Dry weight (engine)
Distributed by
6
Vertical in-line
4 stroke
Turbocharged and
air-to-air charge
cooled
Direct injection
Water-cooled
160 x 190 mm
22.921 litres
13.6:1
Anti-clockwise,
viewed on flywheel
1, 5, 3, 6, 2, 4
113.4 litres
105 litres
3,027 mm
1,706 mm
1,964 mm
2,524 kg
HCI634G - Technical Data Sheet
HCI634G
SPECIFICATIONS & OPTIONS
STANDARDS
TERMINALS & TERMINAL BOX
Newage Stamford industrial generators meet the
requirements of BS EN 60034 and the relevant section
of other international standards such as BS5000, VDE
0530, NEMA MG1-32, IEC34, CSA C22.2-100,
AS1359.
Other standards and certifications can be considered
on request.
Standard generators feature a main stator with 6 ends
brought out to the terminals, which are mounted on the
frame at the non-drive end of the generator. A sheet
steel terminal box contains the AVR and provides
ample space for the customers' wiring and gland
arrangements. It has removable panels for easy
access.
VOLTAGE REGULATORS
SHAFT & KEYS
MX321 AVR - STANDARD
All generator rotors are dynamically balanced to better
than BS6861:Part 1 Grade 2.5 for minimum vibration in
operation. Two bearing generators are balanced with
a half key.
This sophisticated Automatic Voltage Regulator (AVR)
is incorporated into the Stamford Permanent Magnet
Generator (PMG) system and is fitted as standard to
generators of this type.
The PMG provides power via the AVR to the main
exciter, giving a source of constant excitation power
independent of generator output. The main exciter
output is then fed to the main rotor, through a full wave
bridge, protected by a surge suppressor. The AVR
has in-built protection against sustained overexcitation, caused by internal or external faults. This
de-excites the machine after a minimum of 5 seconds.
Over voltage protection is built-in and short circuit
current level adjustments is an optional facility.
WINDINGS & ELECTRICAL PERFORMANCE
All generator stators are wound to 2/3 pitch. This
eliminates triplen (3rd, 9th, 15th …) harmonics on the
voltage waveform and is found to be the optimum
design for trouble-free supply of non-linear loads. The
2/3 pitch design avoids excessive neutral currents
sometimes seen with higher winding pitches, when in
parallel with the mains. A fully connected damper
winding reduces oscillations during paralleling. This
winding, with the 2/3 pitch and carefully selected pole
and tooth designs, ensures very low waveform
distortion.
INSULATION/IMPREGNATION
The insulation system is class 'H'.
All wound components are impregnated with materials
and processes designed specifically to provide the
high build required for static windings and the high
mechanical strength required for rotating components.
QUALITY ASSURANCE
Generators are manufactured using production
procedures having a quality assurance level to BS EN
ISO 9001.
The stated voltage regulation may not be maintained in
the presence of certain radio transmitted signals. Any
change in performance will fall within the limits of
Criteria 'B' of EN 61000-6-2:2001. At no time will the
steady-state voltage regulation exceed 2%.
NB Continuous development of our products entitles
us to change specification details without notice,
therefore they must not be regarded as binding.
Front cover drawing typical of product range.
2
HCI634G
WINDING 312
CONTROL SYSTEM
A.V.R.
SEPARATELY EXCITED BY P.M.G.
MX321
VOLTAGE REGULATION
SUSTAINED SHORT CIRCUIT
± 0.5 %
With 4% ENGINE GOVERNING
REFER TO SHORT CIRCUIT DECREMENT CURVES (page 7)
CLASS H
INSULATION SYSTEM
IP23
PROTECTION
0.8
RATED POWER FACTOR
DOUBLE LAYER LAP
STATOR WINDING
TWO THIRDS
WINDING PITCH
6
WINDING LEADS
STATOR WDG. RESISTANCE
0.003 Ohms PER PHASE AT 22°C STAR CONNECTED
ROTOR WDG. RESISTANCE
1.75 Ohms at 22°C
R.F.I. SUPPRESSION
BS EN 61000-6-2 & BS EN 61000-6-4,VDE 0875G, VDE 0875N. refer to factory for others
WAVEFORM DISTORTION
NO LOAD < 1.5% NON-DISTORTING BALANCED LINEAR LOAD < 5.0%
MAXIMUM OVERSPEED
2250 Rev/Min
BALL. 6224 (ISO)
BEARING DRIVE END
BALL. 6317 (ISO)
BEARING NON-DRIVE END
1 BEARING
2 BEARING
WEIGHT COMP. GENERATOR
1965 kg
1989 kg
WEIGHT WOUND STATOR
934 kg
934 kg
WEIGHT WOUND ROTOR
814 kg
766 kg
2
WR² INERTIA
17.8009 kgm2
18.3482 kgm
2023kg
2029kg
183 x 92 x 140(cm)
183 x 92 x 140(cm)
50 Hz
60 Hz
SHIPPING WEIGHTS in a crate
PACKING CRATE SIZE
THF<2%
TIF<50
1.614 m³/sec 3420 cfm
1.961 m³/sec 4156 cfm
TELEPHONE INTERFERENCE
COOLING AIR
VOLTAGE STAR
380/220
400/231
415/240
440/254
416/240
440/254
460/266
480/277
VOLTAGE DELTA
220
230
240
254
240
254
266
277
kVA BASE RATING FOR
REACTANCE VALUES
Xd DIR. AXIS SYNCHRONOUS
800
800
800
800
875
925
963
1000
3.14
2.83
2.63
2.34
3.53
3.34
3.18
3.03
X'd DIR. AXIS TRANSIENT
0.25
0.23
0.21
0.19
0.28
0.26
0.25
0.24
X''d DIR. AXIS SUBTRANSIENT
0.18
0.16
0.15
0.13
0.21
0.20
0.19
0.18
Xq QUAD. AXIS REACTANCE
1.88
1.70
1.58
1.40
2.10
1.98
1.89
1.80
X''q QUAD. AXIS SUBTRANSIENT
0.21
0.19
0.18
0.16
0.24
0.23
0.22
0.21
XL LEAKAGE REACTANCE
0.10
0.09
0.08
0.07
0.12
0.11
0.10
0.10
X2 NEGATIVE SEQUENCE
0.22
0.20
0.19
0.17
0.24
0.23
0.22
0.21
X0 ZERO SEQUENCE
0.03
0.03
0.03
0.02
0.03
0.03
0.03
0.03
REACTANCES ARE SATURATED
T'd TRANSIENT TIME CONST.
T''d SUB-TRANSTIME CONST.
T'do O.C. FIELD TIME CONST.
Ta ARMATURE TIME CONST.
SHORT CIRCUIT RATIO
VALUES ARE PER UNIT AT RATING AND VOLTAGE INDICATED
0.185
0.025
2.35
0.04
1/Xd
3
50
Hz
4
HCI634G
Winding 312
THREE PHASE EFFICIENCY CURVES
HCI634G
Winding 312
Locked Rotor Motor Starting Curve
50
Hz
30
346V
380V 400V 415V
440V
PER CENT TRANSIENT VOLTAGE DIP .
25
20
15
10
5
0
0
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
LOCKED ROTOR kVA
60
Hz
30
380V
416V
440V
1800
2000
460V 480V
PER CENT TRANSIENT VOLTAGE DIP .
25
20
15
10
5
0
0
200
400
600
800
1000
1200
1400
LOCKED ROTOR kVA
6
1600
2200
2400
2600
HCI634G
Three-phase Short Circuit Decrement Curve. No-load Excitation at Rated Speed
Based on star (wye) connection.
50
Hz
CURRENT (Amps)
100000
SYMMETRICAL
ASYMMETRICAL
10000
1000
0.001
0.01
0.1
TIME (secs)
1
10
1
10
Sustained Short Circuit = 2,900 Amps
60
Hz
CURRENT (Amps)
100000
SYMMETRICAL
ASYMMETRICAL
10000
1000
0.001
0.01
0.1
TIME (secs)
Sustained Short Circuit = 3,500 Amps
Note 1
The following multiplication factors should be
used to adjust the values from curve between
time 0.001 seconds and the minimum current
point in respect of nominal operating voltage :
50Hz
Voltage
380v
400v
415v
440v
60Hz
Factor
X 1.00
X 1.07
X 1.12
X 1.18
Voltage
416v
440v
460v
480v
Note 2
The following multiplication factor should be used to convert the
values calculated in accordance with NOTE 1 to those applicable to
the various types of short circuit :
3-phase
Factor
x 1.00
x 1.06
x 1.12
x 1.17
The sustained current value is constant irrespective of
voltage level
2-phase L-L 1-phase L-N
x 1.30
x 3.20
x 2.50
2 sec.
Instantaneous
x 1.00
x 0.87
Minimum
x 1.00
x 1.80
Sustained
x 1.00
x 1.50
Max. sustained duration
10 sec.
5 sec.
All other times are unchanged
Note 3
Curves are drawn for Star (Wye) connected machines. For Delta
connection multiply the Curve current value by 1.732
7
HCI634G
Winding 312
0.8 Power Factor
RATINGS
Class - Temp Rise
50Hz
60Hz
Cont. F - 105/40°C
Cont. H - 125/40°C
Standby - 150/40°C
Standby - 163/27°C
Star (V)
380
400
415
440
380
400
415
440
380
400
415
440
380
400
415
440
Delta (V)
220
230
240
254
220
230
240
254
220
230
240
254
220
230
240
254
kVA
750
760
750
750
800
810
800
800
820
830
820
820
850
860
850
850
kW
600
608
600
600
640
648
640
640
656
664
656
656
680
688
680
680
Efficiency (%) 94.5
94.6
94.8
95.0
94.2
94.4
94.6
94.8
94.1
94.3
94.5
94.7
93.9
94.2
94.4
94.6
kW Input
635
643
633
632
679
686
677
675
697
704
694
693
724
730
720
719
Star (V)
416
440
460
480
416
440
460
480
416
440
460
480
416
440
460
480
Delta (V)
240
254
266
277
240
254
266
277
240
254
266
277
240
254
266
277
kVA
813
844
888
913
875
925
963
1000
913
969
1008
1046
950
1000
1044
1088
kW
650
675
710
730
700
740
770
800
730
775
806
837
760
800
835
870
Efficiency (%) 94.6
94.7
94.8
94.8
94.4
94.5
94.5
94.6
94.2
94.3
94.4
94.4
94.1
94.2
94.3
94.3
713
749
770
742
783
815
846
775
822
854
886
808
849
886
923
kW Input
688
DIMENSIONS
© 2002 Newage International
Limited.
Reprinted with permission of N.I.
only.
Printed in England.
SAE
14
18
21
24
AN
25.4
15.87
0
0
PO Box 17 • Barnack Road • Stamford • Lincolnshire • PE9 2NB
Tel: 00 44 (0)1780 484000 • Fax: 00 44 (0)1780 484100
Website: www.newage-avkseg.com
TD_HCI634G.GB_05.03_02_GB
New InteliLite
NT
CREATIVE ENGINEERING
SINGLE SET GEN-SET CONTROLLER
Description
InteliLiteNT models are the new integrated
controllers for gen-sets operating in single
standby mode. Based on the field proven
InteliLite architecture, the new controllers
fulfill every requirement needed for AMF
and MRS applications – including modem
and Internet control, user configuration and
complete gen-set monitoring and protection.
InteliLiteNT controllers are easy to use and
feature an intuitive user interface with
graphic display. The built-in event and
performance log with backed-up real time
clock makes troubleshooting even simpler.
The new design brings seamless integration
with the latest breed of EFI diesel engines
from all major manufacturers. This offers
a higher level of functionality with users
able to display a full range of values from the
EFI engine on standard analog gauges and
true RMS measurement of electric values.
Benefits
 Less wiring and components
 Less engineering and programming
 History log – easy troubleshooting
and warranty claim handling
 Remote monitoring reduced call-out
costs of service engineers
 Analog gauge (VDO, Datcon, …)
outputs – operator friendly
 Perfect price/performance ratio
ComAp is a member of AMPS
(The Association of Manufacturers
of Power generating Systems).
ComAp products meet the highest standards, with
every stage of production undertaken in accordance
with the ISO certification obtained in 1998.
InteliLite
NT
Features

•
•
•
3 phase AMF function*
Over/Under frequency
Over/Under voltage
Voltage asymmetry
 Event and performance log + RTC
• Event based history with 119 events*
Reason, Data and Time + all
important values are stored
• Battery backed-up RTC
• Test Run scheduler

•
•
•
•
3 phase generator protections
Over/Under frequency
Over/Under voltage
Current/Voltage asymmetry
Overcurrent/Overload

•
•
•
•
User interface
Graphic 128 × 64 pixels display
Multiple language capability
Setpoints adjustable via keyboard or PC
Buttons with mechanical feedback

•
•
•
•
True RMS Voltage measurement
3 phase generator and mains* voltages
Voltage range 277 V p-n, 480 V p-p
Maximal measured voltage 300 V p-n
PT ratio range 0.1–500

•
•
•
•
True RMS current measurements
3 generator phase currents
Current range 5 A
Maximal measured current 10 A
CT ratio range 1–5000

•
•
•
•
•
•
Inputs and outputs
3 configurable analog inputs
6 or 7* Binary inputs
6 or 7* Binary outputs
Magnetic pick-up input
D+ preexcitation terminal
Optional 8 analog gauge drive outputs,
compatible with VDO, Datcon gauges
• Optional USB and RS232 plug-in modules
• MODBUS RTU (requires RS232 module)
• Internet

•
•
•
•
Mechanical and operation parameters
Unit dimension 120 × 180 mm
Sealed front face rated for IP65
Hard plexiglass LCD cover
Operation temperature
-20°C – +70°C standard version
-40°C – +70°C low temperature version
• Power supply voltage 8–36 V
• Voltage drops shorter than 50 ms
do not affect operation
Extension modules








 EFI engine support
• Cummins MODBUS
• Engine specific J1939 for all
major manufacturers
• Diagnostic messages in plain text
 Power measurements
• Act / React Power and Power
Factor per phase
• Active and Reactive Energy counter
IL-NT RS232
IL-NT USB IL-NT AOUT8
IL-NT RD
IG-IB
IGS-PTM**
IGS-IOM**
IGL-RA15**
RS232 plug-in interface
USB plug-in interface
gauge plug-in interface
remote display
Internet module
extension I/O module
extension I/O module
15 LED remote annunciator
* Only for Models AMF 20 and AMF 25
** Only for Models MRS 15, MRS 16 and AMF 25
 Communication interfaces
or
+24V
or
RM
ALA
P
STO
8 GAU
PLUG
ULE
IN MOD
RS 232 CE
FA
ULE
INTER
IN MOD
PLUG
UTS
Y OUTP
)
BINAR OLLECTOR
C
(OPEN xx
S
R
M
4x
F xx
5x AM
TS
S
IVER
GE DR
Y INPU
BINAR xx
S
6x MR xx
F
7x AM
IL-NT
J1939
N
CAN TENSIO
I/O EX
1
MAIN
3ph
ONT
.C
C.B
.B. C
SC
OR
RAT
ROL
ONT
3ph
ROL
id
leno
ure
3ph
ress
l So
2
3
LOAD
1
Values
ATOR
NGINE
AS E
SEL/G
DIE
1
ECU
GENER
uest
ed Req
top - Spe
Start/S
only on
3
MAINS
J1939
+ Fault
Codes
RS15,
odels M
M
only on
2
E
GEN
RPM
Oil P
ter
Star
r
rnato
Alte
n
Aux xcitatio
e
Pre
Fue
2
15
NT
EME
SUR
MEA
E
TAG
VOL
NT
EME
SUR
MEA
E
TAG
VOL
ENT
R
CUR
D+
Y
BINAR
TS
OUTPU
(OPEN TOR)
C
E
LL
O
C
IGS-PTM
IG-IOM
1
ATOR
G
ANALO
INPUTS
or
IGL-RA
MAINS
GENER
°C
E
ENGIN
IG-IB
D
IL-NT R
M
MODE
PC
PLY
R SUP
POWE
VDC
8 to 36
+
or
Models
AMF 20
F 25
and AM
F 25
and AM
S 15
d MR
S 10 an
els MR
Mod
not on
MRS 16
Available models
MRS 10
MANUAL AND REMOTE
START CONTROLLER





3 configurable analog inputs
magnetic pickup input
D+ preexcitation terminal
6 binary inputs
6 binary outputs
MRS 15
MANUAL AND REMOTE
START CONTROLLER WITH
SUPPORT FOR EFI ENGINES








3 configurable analog inputs
magnetic pickup input
D+ preexcitation terminal
6 binary inputs
6 binary outputs
CAN with J1939 support
extension modules capability
event and performance log
MRS 11
MANUAL AND REMOTE
START CONTROLLER






3 configurable analog inputs
magnetic pickup input
D+ preexcitation terminal
6 binary inputs
6 binary outputs
GCB control
MRS 16
MANUAL AND REMOTE
START CONTROLLER WITH
SUPPORT FOR EFI ENGINES









3 configurable analog inputs
magnetic pickup input
D+ preexcitation terminal
6 binary inputs
6 binary outputs
GCB control
CAN with J1939 support
extension modules capability
event and performance log
AMF 20
AUTOMATIC MAINS FAILURE
START CONTROLLER






3 configurable analog inputs
magnetic pickup input
D+ preexcitation terminal
7 binary inputs
7 binary outputs
GCB and MCB control
AMF 25
AUTOMATIC MAINS FAILURE
START CONTROLLER WITH
SUPPORT FOR EFI ENGINE









3 configurable analog inputs
magnetic pickup input
D+ preexcitation terminal
7 binary inputs
7 binary outputs
GCB and MCB control
CAN with J1939 support
extension modules capability
event and performance log
The Chart of Functions of InteliLiteNT Controllers
FUNCTIONS/CONTROLLERS
IL-NT MRS 10
IL-NT MRS 15
IL-NT MRS 11
IL-NT MRS 16
IL-NT AMF 20
IL-NT AMF 25
6/6
6/6
6/6
6/6
7/7
7/7
Analog inputs
3
3
3
3
3
3
Binary inputs/outputs
Magnetic pick-up
l
l
l
l
l
l
AMF function
–
–
–
–
l
l
Input configuration
l
l
l
l
l
l
Output configuration
l
l
l
l
l
l
3 ph / –
3 ph / –
3 ph / –
3 ph / –
3 ph / 3 ph
3 ph / 3 ph
Current measurement
3 ph
3 ph,
IDMT overcurrent
3 ph
3 ph,
IDMT overcurrent
3 ph
3 ph,
IDMT overcurrent
kW/kWh measurement
l/–
l/l
l/–
l/l
l/–
l/l
History file
–
l
–
l
–
l
RTC with battery
l
l
l
l
l
l
GCB/MCB control with feedback
– /–
– /–
l /–
l /–
l/l
l/l
Battery charging alternator circuit
l
l
l
l
l
l
Voltage measurement Gen. / Mains
1)
1)
2)
2)
J1939 interface
–
l
–
l
–
l
Internet support
with IG-IB
with IG-IB
with IG-IB
with IG-IB
with IG-IB
with IG-IB
–
IGL-RA15, IG-IOM,
IGS-PTM
–
IGL-RA15, IG-IOM,
IGS-PTM
–
IGL-RA15, IG-IOM,
IGS-PTM
8 analog gauge drivers
O
O
O
O
O
O
RS232 interface
O
O
O
O
O
O
Extension modules
Modem interface
O
O
O
O
O
O
MODBUS interface
O
O
O
O
O
O
Remote display
O
O
O
O
O
O
Cummins MODBUS
O
O
O
O
O
O
Key:
l
–
O
1)
2)
included
excluded
optional – plug-in module required
Automatic GCB control without feedback
Manual/Automatic GCB control, but without feedback
Legend: IG-IOM/IGS-PTM: I/O extension modules
IGL-RA15: Remote annunciator
GCB: Generator circuit breaker
MCB: Mains circuit breaker
For more information about our products and solutions visit our web-page
www.comap.cz
Manufacturer:
Local Distributor / Partner:
ComAp, spol. s r. o.
Czech Republic
Phone:+ 420 246 012 111
Fax: + 420 266 316 647
E-mail: [email protected]
Internet: www.comap.cz
Features and specification are subject to change without prior notice
2007-09