Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Technical features of NT 85x test systems: • Max. 131072 test points in corresponding test point units, continuity test up to 2 ADC, Kelvin measurement from 1 mΩ • Short circuit , insulation and dielectric strength test up to 3750 VDC / 2650 VAC • Component test of resistors, capacitors, diodes, Zener-diodes, LEDs, varistors and surge arrestors • Voltage measurement AC / DC, external voltage recognition • Function test of assemblies (operating voltage up to 250 V DC/AC) • Control and visualization of the test process via standard PC • User-friendly operating software NT Control, language selectable: German, English, French, Italian, Polish, Czech, Hungarian, Korean, Chinese…. • Self-diagnostics, multimeter, pin number probe • Integration of external generators and measuring devices (programmable power supplies AC/DC , digital multimeter…) • Detailed report of the test runs and the test results • Individual test sequence programming (TSE) • Temperature and humidity report • CAD data import (UNICAD) in consideration of the voltage levels • Bus communication, for example MVB NT Control Testpanel adaptronic Prüftechnik GmbH Dörlesberg-Ernsthof D-97877 Wertheim Germany Quality Management System VDA 6.4 DIN EN ISO 9001 Telefon ++49 (0) 9345 / 930-0 Telefax ++49 (0) 9345 / 930-100 E-Mail [email protected] Internet www.adaptronic.de NT 85x Distributed Test for the Test of Railway Applications Test Point Units (TPU) Example TPU 16/7 Front-side: Test point interfaces HAN 46EE (32 used) and pin number probe socket TPU approx. 540 x 350 x 650 mm (W x H x D) with 160 function points We are a medium-sized company – innovative, future-oriented, certified according DIN EN ISO 9001 / VDA 6.4 and well established on the market since more than 25 years. At two locations in Germany, high skilled employees produce, sell and service high quality cable- and wiring test systems as well as adaptation systems. The TPU supports intelligent adapter cables. The test point interfaces can be realized application specific. The test system NT 85x is designed for application specific high voltage tests and high current tests with functional tests for cable harnesses of large dimensions, for complete railway vehicles assemblies up to function tests of assemblies. Rear-side: TPU bus interfaces The signals are concentrated in a single connection cable. The requirements of the insulation test according EN50343 are totally covered by this test system. Herewith electrical circuits of railway vehicles with a nominal voltage up to 440 VAC can be tested with the dielectric strength test. The modular software and hardware architecture allows the easy integration into existing test procedures and production environments. Our NT 85x test system is operated via a PC with the graphical user interface NT Control. System Overview (example) TPU 4.3 System Topology car to car interface example wagon max. 1024 TP‘s 8 NT 85x max. 1024 TP‘s max. 1024 TP‘s 1 TPU TPU 2 3 7 7 coupling area 5 7 7 control stand max. 16384 Test Points (1024 x 16) TPU TPU 3.3 TPU 1.4 TPU 3.2 6 4 4 4 5 5 16 TPU 1.2 TPU 1.1 TPU 2.2 TPU 2.1 Adaptation points: NT 850 TPU 1 TPU TPU 2 3 TPU TPU 2 3 max. 16384 Test Points (1024 x 16) TPU 16 1 TPU 1 Example wagon: 1 car to car interface 2 door 3 door 4 under floor duct Example power car: 5 power units 6 door 7 ceiling duct 8 door 9 control stand 10 coupling area max. 16384 Test Points (1024 x 16) TPU 16 max. 131072 Test Points max. total length: approx. 120 m at up to10 TPUs per interface approx. 60 m at up to10 TPUs per interface TPU = Test Point Unit mobile operating panel (example) 10 TPU 3.1 2 TPU 1.3 2 8 max. 1024 TP‘s 1 TPU example multiple unit 5 3 TPU 4.2 TPU-trolley (example) 9 TPU 4.1 Test Point Units (TPU) Example TPU 16/7 Front-side: Test point interfaces HAN 46EE (32 used) and pin number probe socket TPU approx. 540 x 350 x 650 mm (W x H x D) with 160 function points We are a medium-sized company – innovative, future-oriented, certified according DIN EN ISO 9001 / VDA 6.4 and well established on the market since more than 25 years. At two locations in Germany, high skilled employees produce, sell and service high quality cable- and wiring test systems as well as adaptation systems. The TPU supports intelligent adapter cables. The test point interfaces can be realized application specific. The test system NT 85x is designed for application specific high voltage tests and high current tests with functional tests for cable harnesses of large dimensions, for complete railway vehicles assemblies up to function tests of assemblies. Rear-side: TPU bus interfaces The signals are concentrated in a single connection cable. The requirements of the insulation test according EN50343 are totally covered by this test system. Herewith electrical circuits of railway vehicles with a nominal voltage up to 440 VAC can be tested with the dielectric strength test. The modular software and hardware architecture allows the easy integration into existing test procedures and production environments. Our NT 85x test system is operated via a PC with the graphical user interface NT Control. System Overview (example) TPU 4.3 System Topology car to car interface example wagon example multiple unit 5 max. 1024 TP‘s max. 1024 TP‘s coupling area 5 8 3 max. 1024 TP‘s TPU 4.2 7 7 7 7 control stand max. 1024 TP‘s 10 8 TPU NT 85x 1 TPU TPU 2 3 max. 16384 Test Points (1024 x 16) TPU TPU 3.3 TPU 1.4 1 TPU 3.2 TPU 3.1 2 6 4 4 4 5 5 16 TPU 1.3 TPU 1.2 TPU 1.1 TPU 2.2 TPU 2.1 Adaptation points: NT 850 2 TPU 1 TPU TPU 2 3 TPU TPU 2 3 max. 16384 Test Points (1024 x 16) TPU 16 1 TPU 1 Example wagon: 1 car to car interface 2 door 3 door 4 under floor duct Example power car: 5 power units 6 door 7 ceiling duct 8 door 9 control stand 10 coupling area max. 16384 Test Points (1024 x 16) TPU 16 max. 131072 Test Points max. total length: approx. 120 m at up to10 TPUs per interface approx. 60 m at up to10 TPUs per interface mobile operating panel (example) TPU = Test Point Unit TPU-trolley (example) 9 TPU 4.1 Technical features of NT 85x test systems: • Max. 131072 test points in corresponding test point units, continuity test up to 2 ADC, Kelvin measurement from 1 mΩ • Short circuit , insulation and dielectric strength test up to 3750 VDC / 2650 VAC • Component test of resistors, capacitors, diodes, Zener-diodes, LEDs, varistors and surge arrestors • Voltage measurement AC / DC, external voltage recognition • Function test of assemblies (operating voltage up to 250 V DC/AC) • Control and visualization of the test process via standard PC • User-friendly operating software NT Control, language selectable: German, English, French, Italian, Polish, Czech, Hungarian, Korean, Chinese…. • Self-diagnostics, multimeter, pin number probe • Integration of external generators and measuring devices (programmable power supplies AC/DC , digital multimeter…) • Detailed report of the test runs and the test results • Individual test sequence programming (TSE) • Temperature and humidity report • CAD data import (UNICAD) in consideration of the voltage levels • Bus communication, for example MVB NT Control Testpanel adaptronic Prüftechnik GmbH Dörlesberg-Ernsthof D-97877 Wertheim Germany Quality Management System VDA 6.4 DIN EN ISO 9001 Telefon ++49 (0) 9345 / 930-0 Telefax ++49 (0) 9345 / 930-100 E-Mail [email protected] Internet www.adaptronic.de NT 85x Distributed Test for the Test of Railway Applications