Download Telos Audio Design Co., Ltd. is one of the distinguished audio

Telos Audio Design Co., Ltd. is one of the distinguished audio product
manufacturers in Taiwan. The Telos Audio Design philosophy in product
development is to reproduce the true to life realism and scale in sound for
music appreciation.
Products - Quantum Resonator Conditioner
Every component of QRC focuses on optimizing the effects of power
treatment. This includes two Oyaide R1 receptacles which have been run-in at
0 – 100 kHz, 8 Amp ultra-wide bandwidth signal for 999 hours, a total of 42
days. QRC also includes the latest active magnetic field homogenization
technology, where an internal CPU would activate the QMT module’s circuitry
every 5 minutes, using 20 – 100 kHz ultra-wide bandwidth magnetic field to
homogenize all unpleasant magnetic field residues within the chassis which
increases turbidity and noise ratio of sound quality.
Grounding Noise Reducer
The working concept behind Telos‘ active grounding box is to use active
circuitry to simulate an absolute 0 volt potential grounding point. This will then
be used as an external grounding point for the audio system.
Quantum Noise Resonator
This is a new choice of handling power. It is easy to install and the level of the
sound will be upgraded immediately. Because of the new audio processing
technology QNR, the actual listening experience to the sound system makes
more sense and focuses on more precise audio clarity; the whole background
is black and silence. Furthermore, the music is enhanced with more charm
and smoothness.
Quantum Magnetic Tuning
While listening to music you may feel the need for more refined sound quality
and a quieter or darker musical background. Telos Audio Design Team
therefore designs the Quantum Magnetic Tuning, QMT. QMT further makes
use of QBT ultra-wide bandwidth run-in technology, through concept
conversion; this technique used for run-in of cable conductors is combined
with Quantum Acoustics Diffuser (QAD) unique antenna design.
Mini Quantum Resonator
The latest sound tuning device from Telos Audio Design, incorporating the 6
core technologies of Telos Audio Design. Mini Q was born based on the
trickled down technical know-how from one of Telos‘ higher range products,
QNR. The components were rearranged and optimized to produce an active
phase compensation circuit that fits into a 5 cm by 2.5 cm board.
Quantum X2 Fuse
With Quantum X2, greater bandwidth and finer details can be easily achieved.
Telos design and research team rolls out a new process to produce
Quantum X2. With Quantum X2, it will unleash the fullest potential of your
equipment.
Quantum Acoustics Diffuser
Creating an imitation of natural electromagnetic resonance waves in the
listening environment is the main purpose of the Telos Quantum Diffuser.
Unlike the past experience, Telos hopes that the presence of the „pure wave“
does not derive defective electromagnetic waves with high frequency.
Moreover, with a high-density grid antenna, paired with a high-precision and
low-distortion resonance wave generator, simulated extremely low-frequency
electromagnetic waves are radiated uniformly from the Quantum Diffuser.
Quantum Sticker
Telos‘ Quantum X2 Technique uses an infrared element, anion ore with
chemical and physical elements in a combined formula. Quantum X2 products
actively produce energy to stimulate the electronic components. Once
powered up, Quantum X2 resonance will be delivered to the rest of the audio
equipment via current. Thus the Quantum X2 effect changes the entire HiFi
system’s electron and proton optimization.
QBT Cable Run-in Machine
There are five channels in the QBT Cable Run-in Machine; they are for
speaker cables, power cords, digital cables, RCA cables and XLR balanced
cables. In the first two channels, for speaker cables and power cords, the runin signal is rated at 70 Watt, 24 Volt and a frequency response of 0 Hz to
50 kHz. As for speaker cables, on average, they are seldom gone beyond
10 Watt when listening is at moderate volume. Furthermore, most music
would not even fully cover the frequency spectrum. Nevertheless, Telos still
uses 70 watt of continuous full frequency sweep to run in the speaker cables,
making the signal strength ten times higher than the normal listening status.