Download 360° Omnidirectional Vibration Sensor Specification ( Rolling ball

360° Omnidirectional Vibration Sensor Specification ( Rolling ball switch)
FFuunnccttiioonnss
1. After installation, this 360°vibration sensor (not limited by degree of angle)can
detect vibration, turning, or change in rotation from any direction (360°), even
the slightest change in angle can be detected, it can also detect slight
changes in direction. At present it is the world's most intelligent and most
functional 360 degree omnidirectional vibration sensor (mercury switch).
2. Design based on principles of physics, with a special structure, it has excellent
ability to resist condensation, skillfully sealed so that air and humidity cannot
easily penetrate the outer covering, has a much longer life than the traditional
rolling ball switch. Pass the Restriction of Hazardous Substance test.
3. Able to detect signals emitted because of change in any direction, vibration,
turning, rotation and change of angle, only one kind of switch needed, short
installation time, simplified circuit design, a minimum of electrical parts needed,
lower initial cost of investment and lower failure rate.
4. Protected by world patents： Our company have applied for and obtained
patents for about 90 pieces.
※This 360°vibration sensor (not limited by degree of angle)can replace the
mercury switch and the rolling ball switch (limited by degree of angle).
Introduction
When motionless, this product is linked to an electric current. When
vibrated, turned, or when the angle is changed, a signal is emitted that cuts off
the electric current. Electrical engineers can use software designed to work
together with this product and can be used in car and motorcycle burglar
alarms, door alarms, illuminated sports shoes, light sensors for bicycles,
pedometers, toys, a safety device for cutting off the electrical current in irons,
safety devices for household electrical appliances, device for automatically
cutting off electrical current, burglar-proof safes, sports equipment, security
cameras, medical instruments, a wide variety of uses, because it uses a very
small electric current, it is suited for working together with other software, and
is not designed to be used in switches that use a high voltage electric currents.
Please contact Manager Lu or Miss Wu
TEL：886-6-3359933 FAX：886-6-3353333
http： //www.jingleworld.com.tw
E-mail：[email protected]
360° Omnidirectional Vibration Sensor Specification ( Rolling ball switch )
Product JWR- 001 ( High sensitivity type ) □ Operate Temperature : －40°C ~ 105°C
Number：JWR-001-02 ( Middle sensitivity type ) □ Sn Temperature（Solder Dip）
：280°C/ 3 sec
JWR-001-03 ( Low sensitivity type ) □ Sn Temperature（Solder Iron）
：400°C/ 5 sec
Size: L : 6m/m
W : 6m/m
Rang of two pins： 2.3
Short Circuit Time : ＜ 0.1 sec
H : 6m/m
Recovery Time : ＜ 0.1 sec
m/m
Switch Current : ＜ 2 m A
Operation Voltage :
Error rate：Very Low
5 volt ﹑12 volt ﹑24 volt Failure rate：＜ 0.5%
Moisture and Condensation
Resistance : perfect
Color : Black
Weight : 0.4g
Life : Much longer than traditional
vibration sensor bearing Switch
Pin No.: 4 Pins
Open Resistance ：
∞
Material : Nylon 6 6
ball No：one ball
Packing Method : Packing method is
suitable to any automatic machine
It can detect vibration，turning or
Replaced the mercury switch and the
change in rotation from any direction rolling ball switch
TEST CIRCUS
2
1
3
4
ANY TWO PINS CONNECTED AT
AN ANGLE OF 45 DEGREE：
EXAMPLE：PIN 1 CONNECTED PIN 3
PIN 2 CONNECTED PIN 4
●High sensitivity level
Our Production Has Finished SGS test
Report and Passed the ROHS test by SGS.
●Middle sensitivity
●Low sensitivity
24 volt
1 4
2 3
6 mm
2 Pin = 2.3 mm
10 k
mm
1
6 mm 2
6 mm
1
2
4
4
3
3
1
1mm
mm
Vibration ( off )
3
1
4
2
3
motionless
(ON)
motionless
(ON)
6mm
2
Sample Chart
Rang of pin
http： //www.jinglew orld.com.tw
E-mail：[email protected]
4
Test Electric circus
Motionless (on)
Please contact Manager Lu or M iss Wu
TEL：886-6-3359933 FAX：886-6-3353333
Electric Circuit
1.靜止通電狀態 (NORMAL ON)
VCC
R1
震動
1
2
Vibration
3
1
4
2
OSC
ON
ON (靜止)
2.靜止不通電狀態 (NORMAL OFF)
VCC
R1
1
震動
2
OFF
3
1
4
2
Vibration
OFF (靜止)
OSC
3.單穩態觸發 (ONE SHOT TRIGGER)
VCC
3
4
1
INPUT
2
OSC
INPUT
NE555 單穩態線路
NE555 ONE SHOT
CIRCUIT
OFF
OFF (靜止)
OUTPUT
1
OUTPUT
0
0 (靜止)
4.雙穩態觸發 (BISTABLE TRIGGER)
單穩態觸發
ONE SHOT TRIGGER
D
Q
原狀態(Q)
T+0=Q
改變成另一狀態(/Q)
T+1=/Q
/Q
http： //www.jinglew orld.com.tw
E-mail：[email protected]
Please contact Manager Lu or Miss Wu
TEL：886-6-3359933 FAX：886-6-3353333