Download Spec Sheet - Villa Lighting

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Document related concepts

Stray voltage wikipedia, lookup

Skin effect wikipedia, lookup

Mains electricity wikipedia, lookup

Alternating current wikipedia, lookup

Power over Ethernet wikipedia, lookup

Ground (electricity) wikipedia, lookup

Ground loop (electricity) wikipedia, lookup

Telecommunications engineering wikipedia, lookup

Loading coil wikipedia, lookup

Electrical connector wikipedia, lookup

Overhead power line wikipedia, lookup

National Electrical Code wikipedia, lookup

Home wiring wikipedia, lookup

Electrical wiring wikipedia, lookup

Transcript
MWS
D es c r ip tion
MWS, Modular Wiring Systems, provides low cost installation of branch
circuit wiring for lighting and power. Using modular components
that plug together, MWS can be installed in a fraction of the time of
hardwiring. Plus, MWS offers the advantage of relocating fixtures and
outlets in future renovations.
The MWS Starter Fitting is the starting point for the MWS system. The
Fitting is installed in a standard 1/2" knockout of an electrical junction
box, duct or panel. Since the Starter Fitting is mounted externally it does
not impact wire fill.
®
Type
Catalog #
Project
Date
Comments
Prepared by
MWS Starters are also available as Starter Cables with 9, 15, or 21 feet of
MC cable.
Des ign Fea tur es
• UL Listed under Standard 183 for
make or break under load.
• Meets requirements of Article 604
of the National Electrical Code.
• MWS componenets assembled
with 12 AWG/10 AWG conductors
rated at 20 amperes with full size
ground wire.
• Copper conductors are THHN
insulated wire rated 90°C.
• Galvanized steel exterior with
integral keying for voltage and
amperage.
• Unique double-blade contact
ensures proper mating of electrical
components to prevent pushback
or pullout.
• Includes threaded locknut
connector and 6" pre-stripped leads
on fitting ends or at the end of
specified cable length.
All unused outlets require a MWS
dust cover. MWS ST, SP, SD , C T
and TC are shipped with one dust
cover attached.
• Valox 365 constructed contact
housings are approved for
environmental air plenums.
ST
Starter Fitting
Starter Cable
Modular Wiring System
D im ens iona l D a ta
STARTER FITTING
STARTER CABLE
Front
4-3/8"
[112mm]
Top
4-3/8"
[112mm]
3/4"
[19mm]
Side
Side
MWS design layout time is reduced.
Bills of material are computer-generated
guaranteeing accuracy.
MWS drawing symbols and details
standardized.
Layouts are available on CD or e-mail.
To utilize this service and for additional
information, contact the MWS Sales
Department (888) 487-4887.
All electrical boxes, conduit, connections
and switches by others.
Install dust covers on unused open ends.
Scale is exaggerated on fixtures and
MWS system applications.
YS
TEM
S
S
3/4"
[19mm]
MWS AUTOCAD DRAFTING
MWS offers AutoCAD
drafting to layout
MWS, providing the
contractor with
additional benefits.
Specifications and dimensions subject to change without notice.
ER
C
Consult your representative for additional options and finishes.
D
Top
Front
TIFIE
ADF031840
2013-02-05 16:24:30
MWS ST
SYSTEM VIEW (not to scale)
Unit with no cable
Starter
Fixture Cable
Extender or Fixture Cable
Starter (ST)
Converts conventional wiring to MWS. Branch circuits
are fed from the panel to a junction box with conduit and
wire. The Starter is mounted to the junction box with a
1/2" threaded lock nut connector. Circuits are then
connected to the appropriate leads of the Starter.
Starter Cables have 9', 15' or 21' of MC cable.
Consult MWS Installation, Application and Specification
Manual for additional
comprehensive system information.
Unit with cable
Starter Cable
Fixture Cable
Extender or Fixture Cable
Or der ing I nf or m a tion
SA MP L E NUMB E R : 2 7 ST 1 2 /2 G
ST
Voltage
12=120V
20=208V
24=240V
27=277V
34=347V
48=480V
NOTES:
(1)
Component
ST=Starter
Conductors and Size
10/2G=#10, 2 Conductors Plus Ground
10/3G=#10, 3 Conductors Plus Ground
10/4G=#10, 4 Conductors Plus Ground
12/2G=#12, 2 Conductors Plus Ground
12/3G=#12, 3 Conductors Plus Ground
12/4G=#12, 4 Conductors Plus Ground
Cable Length (Feet)
09=9'
15=15'
21=21'
[Blank]=No Cable
Options
2N=2 Neutral (1)
12/4G and 10/4G only.
Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information.
MWS AUTOCAD DRAFTING
MWS offers AutoCAD
drafting to layout
MWS, providing the
contractor with
additional benefits.
MWS design layout time is reduced.
Bills of material are computer-generated
guaranteeing accuracy.
SH IP P ING Information
MWS drawing symbols and details
standardized.
StandardUnitStandard
Cable Lengths
Wt.
Qty./Carton
0'
.7 lbs.
60
9'
3.0 lbs.
9
15'
4.5 lbs.
6
21'
6.3 lbs.
4
Layouts are available on CD or e-mail.
To utilize this service and for additional
information, contact the MWS Sales
Department (888) 487-4887.
Specifications and dimensions subject to change without notice.
MWS • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770 468.4801
ADF031840
2013-02-05 16:24:30