Download QUOTATION High Voltage Testers

EMIN Vietnam Joint Stock Company
Office in Ha Noi City:
Add : No 8A, Hoang Cau Street, Dong Da Distric, Ha Noi, Vietnam
Tel : (04) 35.381.269 - ( 04) 35.381.271
Fax : (04) 35 190 360;
Email: [email protected]
Office in Ho Chi Minh City:
Add : No 218 Cong Hoa Street, Ward 12, Tan Binh District, Ho Chi Minh City
Tel : (08) 3811 96 36 - (08) 3811 93 59
Fax : (08) 3811 95 45 ; Email: [email protected]
QUOTATION
High Voltage Testers
06/06/2017
To:
Company:
Address:
Email:
Tel:
Fax
Thank you very much for your requirement and we would like to offer you the price as under:
Commodit
y
Description
Manufacture: Sew
Model: 287SVD
Sew 287SVD
Origin: Taiwan
Personal
Warranty: 12 month
Safety
Voltage
Detector
Pric
e
0
USD
Compact, easy to wear and convenient in use.
Usable both indoor and outdoor.
Water-proof design. (IP65)
Equipped with self-testing functions.
Able to sense all kinds of AC High Voltage System.
Low power consumption.
Distance of starting warning : 85 cm for 22.8kV (phase to phase)
Applicable frequency : 50 / 60 Hz
Volume : 70dB or higher at 1 meter distance
Operating Temp & Humidity : 0°C - 40°C / 80% RH.
Outside dimensions : 61(L) x 62(W) x18.5(D) mm
Weight : 70g (incl. battery)
Battery type : CR2032
Battery life : 50 hours for continuous use
Manufacturer: SEW
Made in Taiwan
SEW 273HP
Model: 273HP
Non-Contact
High Voltage Warrantly: 12 months
2 ranges for selection: LOW 50V~1.5kV
Detector
HIGH 1.5kV~132kV
There is no power consumption in off mode: 0uA
Nice mechanical slide switch for function selection: HIGH/OFF/LOW
0
USD
The power consumption in low voltage detection mode: Less than 20mA
The power consumption in high voltage detection mode: Less than 20mA
Bright LED and audible alarm sound when voltage is present
Lightweight, robust and compact
Efficient and easy to use
Users have to use the Hot Stick when test high voltages between
1.5kV~132kV
Optional accessories:
HS-175 Telescopic hot stick (triangle-type)
HS-120 Hot Stick
Operating temperature: 0ºC~50ºC
Dimensions: 245 x 80 x 37 mm
Weight (battery included): 175g
Power source: 9V(6LF22) x 1 Alkaline battery
Safety standards: EN 61326-1, EN 61000-4-2, EN 61000-4-3
SEW 285HD
High Voltage
Testers/Detect
or (10~22 kV)
Manufacturer: SEW
Made in Taiwan
- ranges 10~22 kV
- The LCD will "flash continuously" for high voltage testing.
- Physical contact with electrical conductors is not necessary when testing for
live wires.
- The 285 HD senses the radiated field that surrounds live conductors.
- Radiated field strength increases with voltage and decreases quickly with
distance.
- Large LCD.
- Easy to install.
- No batteries required.
- Weight : Approx. 80g.
39
USD
Manufacturer: SEW
Made in Taiwan
SEW 285-B
- ranges 6.6~11 kV
HD High
- The LCD will "flash continuously" for high voltage testing.
Voltage
Testers/Detect - Physical contact with electrical conductors is not necessary when testing for
or (6.6~11
live wires.
kV)
- The 285 HD senses the radiated field that surrounds live conductors.
- Radiated field strength increases with voltage and decreases quickly with
distance.
- Large LCD.
- Easy to install.
- No batteries required.
- Weight : Approx. 80g.
39
USD
Manufacturer: SEW
Made in Taiwan
SEW 285-A
- ranges 3~7 kV
HD High
- The LCD will "flash continuously" for high voltage testing.
Voltage
Testers/Detect - Physical contact with electrical conductors is not necessary when testing for
or (3~7 kV) live wires.
- The 285 HD senses the radiated field that surrounds live conductors.
- Radiated field strength increases with voltage and decreases quickly with
distance.
- Large LCD.
39
USD
- Easy to install.
- No batteries required.
- Weight : Approx. 80g.
Manufacturer: SEW
Made in Taiwan
SEW 286
- Waterproof.
SVD Personal
- Indoor and outdoor use.
Safety
- Equipped with self-testing functions.
Voltage
Detector
- Sound and flashlight warning of different frequencies varied positively
(11kV)
with sensed voltages.
- Able to sense all kinds of AC high voltage system.
- Low power consumption.
Distance of starting warning: 80 cm for 11.4 kV (6.6 kV voltage to earth)
frequency: 50 / 60 Hz
Volume: 70dB or higher at 1 m
Battery life: 50 hours for continuous use.
Dimensions: 59(L) x 56(W) x 18(D)mm
Weight: 35g
Power source: CR2032 x 1
55
USD
anufacturer: SEW
Made in Taiwan
SEW PD-20
Input impedance: 500 MΩ
High Voltage
Probe (30kV Attenuation ratio: 1000 : 1
Accuracy:
DC, 20kV
AC)
DCV: (0 ~ 20kV) ± 1%,
DCV: (20kV ~ 30kV) ± 2%
AC:V (0 ~ 20kV) typically ± 5% at 50/60 Hz
Max. working voltage : 30kV DC or 20kV AC
Cable length: 1 m
Weight: Approx. 260g
58
USD
Manufacturer: SEW
Made in Taiwan
SEW PD-28
Input impedance: 1000 MΩ
High Voltage
Probe (40kV Attenuation ratio: 1000 : 1
DC or 28kV Accuracy:
AC)
DCV: (0 ~ 20kV) ± 1%,
DCV: (20kV ~ 40kV) ± 2%
AC:V (0 ~ 28kV) typically ± 5% at 50/60 Hz
Max. working voltage : 40kV DC or 28kV AC
Cable length: 1 m
Weight: Approx. 260g
63
USD
Manufacturer: SEW
Made in Taiwan
SEW PD-20S
Input impedance: 500 MΩ
High Voltage
Probe (30kV Attenuation ratio: 1000 : 1
Accuracy:
DC, 20kV
AC)
DCV: (0 ~ 20kV) ± 1%,
DCV: (20kV ~ 30kV) ± 2%
AC:V (0 ~ 20kV) typically ± 5% at 50/60 Hz
64
USD
Max. working voltage : 30kV DC or 20kV AC
Cable length: 1 m
Weight: Approx. 260g
High Voltage
probe Meter
Pintek HVP40 ( 40KV
DC, 1000MΩ
)
68
USD
Brand: Pintek
Model: HVP-40
Origin: Taiwan
MAX. Voltage : DC : 40KV, AC : 28KV, (50/60Hz only) CAT II.
1000MΩ Input Impedance.
Accuracy
DC: ± 1% to 20KV. ± 2% to 40KV.
AC: -5% to -10% (50/60Hz)
Division Ration : 1000:1
CE, TUV GS, UL, CUL, IEC1010
SPECIFICATIONS ( 20 ± 5℃, RH < 80% )
! WARNING !
Before taking any measurements, first connect the alligator clip of this probe to earth
ground and make sure connection is electrically good.
Input impedance:1000MΩ
Division Ratio:1000 : 1
MAX. Test Voltage
DC : 0 ~ 40KV
AC : 1 ~ 28KV ( 50 / 60 Hz )
Safety APPL.
EN61010 UL3111-1 TUV / GS
IEC 1010 CAT II Pollution 2
Polarity:Positive / Negative
Accuracy
DC : ± 1% to 20KV
± 2 % to 40KV
AC : - 5 % to - 10 % ( 1 ~ 28KV ; 50 / 60Hz )
Temperature Cofficient:≦ 200ppm / ℃
Maximum loading Current:≦ 40μA ( at 40KV DC )
Maximum loading power:≦ 1.6 watt
Operating temperature:0 ℃ ~ + 50 ℃
Storage temperature:- 20 ℃ ~ + 70 ℃
Ground Lead length:90cm ( 3ft )
Output cable length:100cm ( 3.3ft )
For:DMM
Output Division:1V / 1KV
Dimensions:340mm x 80ψ
Weight:about 300g
Remark:For 10MΩ input impedance
DMM ( Accuracy < 0.5 % ) only.
User`s /
Manual
Dimension
Comparison
Brand: Pintek
High Voltage
Meter Pintek
Model: HVP-40M
High Voltage Probe Selection
Guide
73
USD
HVP-40M (
40KV DC,
600MΩ ,
Analog Meter
)
Origin
DC 40KV CAT II Pollution 2
600MΩ Impedance
25KV ± 2%, 40KV ± 3%
T.C. 200 ppm/oC
Positive Polarity only.
Resolution 1KV
Need not power.
CE, TUV GS, UL, CUL, IEC1010
SPECIFICATIONS ( 20 ± 5℃, RH < 80% )
! WARNING !
?Before taking any measurements, first connect the alligator clip of this probe to
earth ground and make sure connection is electrically good.
Input impedance:600MΩ
Maximum operation voltage:40KV DC , CAT II , Pollution 2
Polarity:Positive only
Display:Analog indicate
Accuracy:Factory calibrater 25KV ± 2%
?????????FULL scale 40KV ± 3 %
Temperature Coefficient:≦ 200ppm / ℃
Maximum loading Current:≦ 70μA
Maximum loading power:≦ 3 watt
Voltage Range:40KV / 1 Range
Voltage resolution:1KV
Power source:Need not power
Operating temperature:0 ℃ ~ + 50 ℃
Storage temperature:- 20 ℃ ~ + 70 ℃
Ground lead length:90cm ( 35 " )
Dimensions:420 L x 80ψ
Weight :360g
Manual Dimension Comparison High Voltage Probe Selection Guide
Manufacturer: SEW
Made in Taiwan
Sew 275HP
8 voltage settings: 240Vac, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, and
High Voltage
275kV.
Proximity
High bright LED visual indication.
Detector
(240V-275kV) Sound indication.
Easy-to-prove method.
Self-test selection.
Use 3 × 1.5V “C” batteries.
High impact nylon casing.
Non-contact work by proximity.
Compatible with most link sticks.
Lightweight, robust, & compact.
Suitable for indoor and outdoor use.
Detects low voltage on any systems.
Easy access to batteries.
No special parts needed.
Meets EN 61326-1 EN 55011 EN 61000-4-2 EN 61000-4-3
United States Design Patent : US D474, 705 S
Special ranges are available upon request.
115
USD
Manufacturer: SEW
Made in Taiwan
Personal
- Warning Proximity of AC Voltage (240V~50kV).
Safety
- Waterproof.
Voltage
- Easy-to-wear on body or belt.
Detector
SEW 288
- Ultra high bright LED indication.
SVD (loại bỏ - High pitch sound indication.
túi)
- Test & diagnostic circuitry.
- Friendly priority alert reporting.
- Circuit test function.
- High impact type casing.
- Different alerting sound & light.
- Can be adapted to Sunrise(stick).
- Meets EN 61326-1
- Dimension : 114(L) × 67(W) × 27(D) mm
- Weight : Approx. 152g (battery included)
- Power supply : 9V(6F22) × 1
122
USD
Manufacturer: SEW
Made in Taiwan
SEW 276HD
- Valtage Range:
High Voltage
Detector (3kV + H.V. : 3kV ~ 24kV AC
~ 24kV AC; + L.V. : 80V ~ 600V AC
354 - 1005
- Frequency: 50Hz / 60Hz
mm)
- Operation Test:
+ When stretched, hold the grip portion. Put the sensing tip in contact with the
voltage : 250V AC +/- 50V the LED and buzzer should work.
+ When retracted, hold the nameplate portion. Put the sensing tip in contact
with the voltage : 80V AC or below the LED and buzzer should work.
- Operation start distance: Distance at which operation starts when front metal
is brought near dia. 5mm O.C. wire with grip portion meld by hand.
+ Where 24kV / dia. 3mm (voltage to ground) ...... abt 20 cm.
+ Where 6.6kV / dia. 3mm (voltage to ground) ...... abt 3 cm.
+ Where 3.3kV / dia. 3mm (voltage to ground) ...... abt 1 cm.
126
USD
length 255 - 870 mm
Battery : 2 button-cells LR44 (1.5V)
Manufacturer: SEW
Made in Taiwan
SEW PDInput impedance: 600 MΩ
40AM High
Voltage Probe Attenuation ratio: 40000 : 1
Accuracy:
Meter (DC
40kV)
DCV (0 ~ 20kV) ± 2%
DCV (20kV ~ 40kV) ± 3%
Max. working voltage: DC 40kV
Cable length: 1 m
Weight Approx: 400g
126
USD
Manufacturer: Sew
Made in Taiwan
SEW 230HD
Measuring Voltage Range:6kV ~ 36.5kV
High voltage
detector (6kV Operation Start Voltage (To ground): 2.7kV
Display: Light : flashing red light, Sound : intermittent sound 50 dB apart 3 m
~ 36.5kV)
Overall Length Retracted : 893 +/- 50mm, Extracted : 1520 +/- 50mm
136
USD
Frequency: 50 / 60Hz
Operating Temperature: -10 degree C ~ +50 degree C
Battery: 2 button cells LR44 (1.5V)
Weight: 485g (battery included)
Accessories: Instruction manual, carrying case
COMMON RATINGS
Withstand Voltage (On insulating rod): 100kV / 300mm : 5 minutes
Insulation Resistance: 2000M Ohm min. by 1kV/DC megger at the same
testing location as withstand voltage
Leakage Current: 100uA or less than 100uA at withstand voltage test
Construction: Water proof (detecting head impervious to water)
136
USD
High Voltage
Meter Pintek
HVP-40DM (
40KV DC,
2000MΩ ,
3999LCD
DMM )
Brand: Pintek
Model: HVP-40DM
Origin: Taiwan
DC 40KV CAT II Pollution 2.
2000MΩ Impedance.
3999 LCD display.
Accuracy 1.0% full range.
T.C. 100 ppm/oC
400V/4KV/40KV, 3 range.
Resolution 0.1V/1V/10V.
PEAK HOLD, Auto power off.
CE, TUV GS, UL, CUL, IEC1010
SPECIFICATIONS ( 20 ± 5℃, RH < 80% )
! WARNING !
? Before taking any measurements, first connect the alligator clip of this probe
to earth ground and make sure connection is electrically good.
Input impedance:2000MΩ
Maximum operation voltage:40KV DC , CAT II , Pollution 2
Polarity:Positive / Negative
Display:3999 digital, LCD
Accuracy:Full Range ≦ 1.0% ± 2 digital
Temperature Coefficient:≦ 100ppm / ℃
Maximum loading Current:≦ 20μA
Maximum loading power:≦ 0.8 watt
Voltage Range:40KV / 4KV / 400V / 3 Range
Voltage resolution:10V / 1V / 0.1V
Power source:9V / 006P, IEC6L R1, NEDA 1604A
Low battery Indicate:≦7.3V Auto Indicate
Battery Life:About 200hr ( ALKALI )
Auto power off:About 30 mim
PEAK HOLD:≧ 400 ms
Sampling:4 Sampling / sec
Operating temperature:0 ℃ ~ + 50 ℃
Storage temperature:- 20 ℃ ~ + 70 ℃
Ground lead length:90cm ( 35 " )
Dimensions:420 L x 80ψ
Weight:360g
User`s /
Manual
Dimension
Comparison
High Voltage Probe Selection
Guide
Manufacturer: SEW
Made in Taiwan
SEW 277 HP
- 2 ranges for selection ( 2 function buttons )
Non-contact
LOW : 50V~1.5kV
High Voltage
Detector (50V Press the LOW button, 277 HP is ready for low voltage detection.
~ 132kV)
HIGH : 1.5kV~132kV
Press the HIGH button, 277 HP is ready for high voltage detection.
- Power consumption:
Off : Less than 5uA
Low voltage detection mode: Less than 40mA
High voltage detection mode: Less than 40mA
- Circuit test function
Press the Test button to make sure the whole circuit is working well
before testing actual high voltage circuits.
Dimensions: 318(L) x 75(W) x 71(D)mm
Weight: 227g
Power source: 9V(6F22) x 1
146
USD
Manufacture: Laser Liner
Model: 276SHD
Sew 276SHD
Origin: Taiwan
High Voltage
Detector (3kV Warranty: 12 month
151
USD
~ 24kV AC,
255 - 870 mm)
- Valtage Range:
+ H.V. : 3kV ~ 24kV AC
+ L.V. : 80V ~ 600V AC
- Frequency: 50Hz / 60Hz
- Operation Test:
+ When stretched, hold the grip portion. Put the sensing tip in contact with the
voltage : 250V AC +/- 50V the LED and buzzer should work.
+ When retracted, hold the nameplate portion. Put the sensing tip in contact
with the voltage : 80V AC or below the LED and buzzer should work.
- Operation start distance: Distance at which operation starts when front metal
is brought near dia. 5mm O.C. wire with grip portion meld by hand.
+ Where 24kV / dia. 3mm (voltage to ground) ...... abt 20 cm.
+ Where 6.6kV / dia. 3mm (voltage to ground) ...... abt 3 cm.
+ Where 3.3kV / dia. 3mm (voltage to ground) ...... abt 1 cm.
Length 255 - 870 mm
Battery : 2 button-cells LR44 (1.5V)
Hãng sản xuất : Sew - Đài Loan
Xuất xứ : Đài Loan
SEW 276S
Điện áp làm việc
HD High
+ Điện áp cao : 3kV ~ 24kV AC
Voltage
Testers (3kV + Điện áp thấp : 80 ~ 600V AC
~ 24kV AC) Tần số làm việc : 50/60Hz
Chiều dài tháo khi thu lại: 354+30mm
Chiều dài khi kéo ra: 1010±30mm
151
USD
Nhận biết : Đèn LED nhấp nháy và Còi phát tiếng kêu (50dB)
Trở kháng giữa đầu đo và tay cầm (1kV) : > 2GΩ
Chiều dài gậy : 255 - 870 mm (Kéo dài khi đo)
Chức năng : Phát hiện được điện áp trên dây với điện áp thấp nhất là 80V và
cao nhất là 24kV. Được cảnh báo trên còi và LED.
Nhiệt độ làm việc : -10˚ C ~ +50˚C
Tiêu chuẩn : EN61010-1 EN50081-1 EN55082-1En55022 EN61000-42 EN61000-4-3
Khối lượng : 150g
Nguồn : Pin LR44 (1.5V)
Bảo hành : 12 tháng
Manufacturer: SEW
Made in Taiwan
SEW 2713 PU
Model: 2713 PU
High Voltage
Proving Unit Warrantly: 12 months
Designed to proof:
-Phasing sticks
-High voltage detectors (contact type only, not to be used with non contact
proximity detectors)
-High voltage and voltage testers
Battery operated
Led indicates when power is "ON"
Small and hand-held
Quick connection with normal 4mm test leads
Volage settings: 500Vdc/1000Vdc/2500Vdc/5000Vdc
Over-current protection: Yes
Power on indicator: Yes
Operating temperature: -5ºC to 45ºC
Storage temperature: -10ºC to 55ºC
Dimensions: 205 x 90 x 55 mm
Weight (battery included): 510g
Power source: 1.5V(AA) x 6
161
USD
Manufacturer: SEW
Made in Taiwan
SEW 290 HD
Measuring voltage range 6kV~81.5kV
High Voltage
Detector (6kV Operation start voltage (To ground): 2.7kV
Withstand voltage: 100kV / 300mm : 1 minutes
~ 81.5kV)
Insulation resistance: 2000MΩ min by 1kV / DC megger at the
same testing location as withstand voltage
Leakage current:100uA or less than 100uA at withstand
Display Light : Flashing red light.
Sound : Intermittent sound 50 dB apart 3 m.
Frequency: 50/60Hz
Battery: 2 button-cells LR44(1.5V)
length Retracted: 1370±50mm
length Extracted: 2450±50mm
Weight: Approx. 590g
194
USD
SEW 216
HVD High
Voltage
Capacitive
Manufacture: Sew
Made in Taiwan
System Voltage: 132kV
ResponseTime: 1s
Auto-OFF: 3min
349
USD
Detector
(132kV)
Test/Arming Button: Yes
Dimensions: 300(L) x 100(W) x 100(D) mm
Weight: Approx. 550g (battery included)
Manufacturer: SEW
Made in Taiwan
SEW PC7K
System Voltage: 6,6 kV (max 9kV)
High Voltage
Multifunction Full Scale Voltage: 8kV
Total Resistance: 4,48MΩ
Phasing
Sticks (6,6
Response time: <1SEC
kV)
Neon Threshold: 1,2kV
Neon lit Fully @: 1,5kV
Length of Handle: 775mm
Length Front End: 400mm
Total Length: 1,175m
805
USD
Model: MDP-50K
Manufacture: SEW
SEW MDP- Warranty: 12 months
Made in Taiwan
50K multi● AC 50kV and DC 50kV measurement with direct reading.
purpose
digital high ● Input impedance : 400 Mohm
● Auto-ranging :
voltage
AC : 4.000kV / 40.00kV / 50.0kV
phasing meter
DC : 4.000kV / 40.00kV / 50.0kV
● MDP-50K must be connected with an approved hot stick,
such as HS-175, HS-120.
● Check phases are "in-phase" or "out of phase".
● Power source : 1.5V(AA) alkaline battery × 2.
Dimensions
Master stick :490(L) × 101(W) × 118(D)mm
Slave stick :490(L) × 35(W) × 35(D)mm
Weight (battery included) Approx. 1.35kg
810
USD
Manufacturer: SEW
Made in Taiwan
System Voltage: 11 kV (max 15kV)
Full Scale Voltage: 12kV
Total Resistance: 6.78MΩ
Response time: <1SEC
Neon Threshold: 1,2kV
Neon lit Fully @: 1,5kV
Length of Handle: 775mm
Length Front End: 400mm
Total Length: 1,175m
Total Weight: 2,1Kg
873
USD
Manufacturer: SEW
Made in Taiwan
High Voltage
System Voltage: 22 kV (max 30kV)
Multifunction
Full Scale Voltage: 24kV
Phasing
Sticks SEW Total Resistance: 10,82MΩ
PC22K (22 Response time: <1SEC
kV)
Neon Threshold: 1,2kV
918
USD
SEW PC11K
High Voltage
Multifunction
Phasing
Sticks (11 kV)
Neon lit Fully @: 1,5kV
Length of Handle: 775mm
Length Front End: 400mm
Total Length: 1,175m
Total Weight: 2,1Kg
SEW PC33K
High Voltage
Multifunction
Phasing
Sticks (33 kV)
SEW PC44K
High Voltage
Multifunction
Phasing
Sticks (44 kV)
Manufacturer: SEW
Made in Taiwan
System Voltage: 33 kV (max 40kV)
Full Scale Voltage: 36kV
Total Resistance: 19.68MΩ
Response time: <1SEC
Neon Threshold: 1,2kV
Neon lit Fully @: 1,5kV
Length of Handle: 775mm
Length Front End: 665mm
Total Length: 1.440m
Total Weight: 2,4Kg
1.019
USD
Manufacturer: SEW
Made in Taiwan
System Voltage: 44 kV (max 55kV)
Full Scale Voltage: 48kV
Total Resistance: 26,8MΩ
Response time: <1SEC
Neon Threshold: 1,2kV
Neon lit Fully @: 1,5kV
Length of Handle: 775mm
Length Front End: 820mm
Total Length: 1.595m
Total Weight: 2,5Kg
1.125
USD
Model: 278HP (275kV)
Manufacturer: SEW
SEW 278HP
Origin: Taiwan
NONCONTACT Warranty: 12 months
HIGH
VOLTAGE
DETECTOR
(275KV)
8 voltage settings : 240V, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, 275kV.
• Protection class : IP65
• 3 LED indicators in a circle for easier viewing
in any directions (360° LED indication).
• 8 voltage settings : 240V, 4.2kV, 15kV, 25kV, 35kV,
69kV, 115kV, 230kV
• High bright LED visual indication.
• With the longer shelter to make the 3 LED
indicators brighter under the sun.
• Sound indication.
• The maximum voltage setting can be 500kV.
• Self-test function.
• Power source : 1.5V "C" type battery × 3
• High impact nylon casing.
• Non-contact work by proximity.
• Compatible with most hot sticks.
• Lightweight, robust & compact.
• Suitable for indoor and outdoor use.
141
USD
• Easy access to batteries.
• Safety standard : EN 61326-1 CISPR 11
EN 61000-4-2 EN 61000-4-3
EN 61000-4-8
• Special ranges are available upon request.
SEW 278HP
NONCONTACT
HIGH
VOLTAGE
DETECTOR
(500kV)
8 voltage settings : 240V, 3.3kV, 11kV, 22kV, 33kV, 66kV, 110kV, 220kV,
330kV, 500kV
• Protection class : IP65
• 3 LED indicators in a circle for easier viewing
in any directions (360° LED indication).
• 8 voltage settings : 240V, 4.2kV, 15kV, 25kV, 35kV,
69kV, 115kV, 230kV
• High bright LED visual indication.
• With the longer shelter to make the 3 LED
indicators brighter under the sun.
• Sound indication.
• The maximum voltage setting can be 500kV.
• Self-test function.
• Power source : 1.5V "C" type battery × 3
• High impact nylon casing.
• Non-contact work by proximity.
• Compatible with most hot sticks.
• Lightweight, robust & compact.
• Suitable for indoor and outdoor use.
• Easy access to batteries.
• Safety standard : EN 61326-1 CISPR 11
EN 61000-4-2 EN 61000-4-3
EN 61000-4-8
• Special ranges are available upon request
141
USD
Manufacture: Sew
Made in Taiwan
SEW 220
System Voltage: 6.6/132kV
HVD
ResponseTime: 1s
Capacitive
High Voltage Auto-OFF: 3min
Detectors
Test/Arming Button: Yes
(6.6/132kV) Dimensions: 300(L) x 100(W) x 100(D) mm
Weight: Approx. 550g (battery included)
341
USD
Reamrk:
- The above-mentioned price Excluded VAT invoice.
- The picture is not completely the same as real product
Delivery:
- Inside Hanoi downtown after 2 to 6 hours in working time for product available in stock, except for products need to be
made
- Products for provincial delivery depend on the delivery time from nearest wearhouse to delivery place.
Payment mode:
* In cash or bank remittance
Further information
EMIN Vietnam Joint Stock Company
Office in Ha Noi City:
Add : No 8A, Hoang Cau Street, Dong Da Distric, Ha Noi, Vietnam
Tel : (04) 35.381.269 - ( 04) 35.381.271
Fax : (04) 35 190 360;
Email: [email protected]
Office in Ho Chi Minh City:
Add : No 218 Cong Hoa Street, Ward 12, Tan Binh District, Ho Chi Minh City
Tel : (08) 3811 96 36 - (08) 3811 93 59
Fax : (08) 3811 95 45 ; Email: [email protected]