Download Specifications - Tagliafico Lighting

Specifications
VICTORIAN STREET ALLUMINIO CUT-OFF VES
Luminaire brand Tagliafico Lighting, stylized lantern-shaped, made of cast and extruded aluminum painted with assembly
screws in stainless steel A2. The details are made of turned brass. Finishing and painting surfaces performed in a
workmanlike manner.
Lantern consists of an aluminum cage bottom, composed of 4 uprights joined to a central flange with electric arc welding
TIG. To this is integral with the frame of the glass support plane on which rests the optical silicone gasket. The passage
of wire inside a pillar.
The frame is hinged top hat die-cast aluminum which prevents the propagation of light upwards. Opening it, the optical
integral with the compartment door wiring fixed to the inside, provides access to the lamp housing. The cathedral with the
fireplace and the smoke round the lantern.
The top of the lantern is made in 11/10 thick copperplate, burnished and varnished. This cover avoids down-top light
pollution.
The deburring aluminum castings after the drilling and tapping are sandblasted steel grit blasting SA 2 ½, followed by
passivation treatment with Alodine 1200, conforms to MIL C-5541 for improved corrosion resistance and adhesion of the
optimization paint on the passivated parts.
Thermosetting powder coating with electrostatic application and curing in the oven 140 degrees, made with highly
complex systems and equipment to ensure a perfect performance and a superior finish against the erosion of weathering.
Coating with an average thickness 60 microns - Resistance to scratch grid standards
ISO 2409 - • Resistance to impact resistance test according to UNI 8901
Available colors: Burnished Bronze - Antique Gray.
Bronze Burnished Copper combined textured (hats only).
The screen top is clear float glass, according to EN 572-9 5 mm thick, tempered at the standard EN 12150. Resistant to
thermal shock and mechanical impact, is required to EN 60598-2-3 paragraph 3.6.5, and if broken it crumbles into tiny
harmless fragments, according to EN12600.
With full transparency, non-yellowing UV exposure is emitted by solar lamps themselves, and are resistant to salt and
atmospheric agents in general.
Removing the 4 nuts securing the inner compartment leads to the electrical wiring. The housing is molded fiberglass
reinforced nylon.
Bi-power supply systems that are switched to a reduced power during night hours, ie when the illuminance can be
brought from a level of operation to a service, for types of high pressure sodium lamps and metal halide.
Electrical equipment are contained in a single unit independent power supply, consisting of a polycarbonate case HT that
covers all the gear - power with low losses in compliance with Directive ErP - EUP - Power factor correction capacitor
HPF power factor> 0.9 - Igniter digital safe timer - Connector disconnectable screw - replaceable fuse - programmable
automatic switch.
The wiring is run in Class II insulation, in accordance with CEI.
The connections to the supply line and to the lamp, are performed through interlocking connectors, which enable the
electrical isolation in the event of maintenance or replacement.
All electrical components mounted into the feature IMQ or equivalent and CE marking of conformity with Directive
89/336/EEC on electromagnetic compatibility. These devices are equipped with reactors equipped with a protection
device against the effects righting of the lamp.
Build to be compliant to the new rules regarding light pollution and energy saving. Internally there is an asymmetrical
reflector, for a better distribution of light towards the ground.
The reflector is fitted inside the body of the lantern, and is made in UNI 4509 aluminium plate P-ALP 99.8% 10/10mm
thick, polished and oxidised.
The lighting equipment, electrical wiring complete, are CE marked and have IP55 protection shall comply with:
Street lighting EN 60598-1:2008 Ed VIII
The lighting equipment, lamps wired for high-pressure sodium vapor and metal halide lamps, include thermal protection to
users.
Available versions:
TP installation on pole, single and multiple top or shelf, with flange with hole 28 mm with nylon bush Ø28 mm for the
recent attack.
BP for suspension installation of Bracelets and Pastoral graft tubular steel ø48.
The lantern is equipped with installation fittings for the selected mounting position.
Versions Available:
Codice/Code
IA067MT070BP2VS
IA067MT070TP2VS
IA067MT100BP2VS
IA067MT100TP2VS
IA067MT150BP2VS
IA067MT150TP2VS
IA067ST070BP2VS
IA067ST070TP2VS
IA067ST100BP2VS
IA067ST100TP2VS
IA067ST150BP2VS
IA067ST150TP2VS
Descrizione/Description
VICTORIAN C-O VEP ES BP MT70-50W CL.2
VICTORIAN C-O VEP ES TP MT70-50W CL.2
VICTORIAN C-O VEP ES BP MT100-70W CL.2
VICTORIAN C-O VEP ES TP MT100-70W CL.2
VICTORIAN C-O VEP ES BP MT150-100W CL.2
VICTORIAN C-O VEP ES TP MT150-100W CL.2
VICTORIAN C-O VEP ES BP ST70-50W CL.2
VICTORIAN C-O VEP ES TP ST70-50W CL.2
VICTORIAN C-O VEP ES BP ST100-70W CL.2
VICTORIAN C-O VEP ES TP ST100-70W CL.2
VICTORIAN C-O VEP ES BP ST150-100W CL.2
VICTORIAN C-O VEP ES TP ST150-100W CL.2
W
70
70
100
100
150
150
70
70
100
100
150
150
Volt
230
230
230
230
230
230
230
230
230
230
230
230
IP
55
55
55
55
55
55
55
55
55
55
55
55
Attacco
EDISON
EDISON
EDISON
EDISON
EDISON
EDISON
EDISON
EDISON
EDISON
EDISON
EDISON
EDISON
Lampada/Lamp
HCI-TT 70W/WDL E27
HCI-TT 70W/WDL E27
HCI-TT 100W/WDL E40
HCI-TT 100W/WDL E40
HCI-TT 150W/WDL E40
HCI-TT 150W/WDL E40
NAVT70
NAVT70
NAVT 100
NAVT 100
NAVT150
NAVT150
kg
10
10,5
10,5
10,5
11,5
11,5
10
10,5
10,5
10,5
11,5
11,5