Download “Exploring Electricity”

Squishy Circuits, Lemon Batteries, and
understanding Circuits
Agenda
 Basic Circuits
 LED’s
 Squishy Circuits
 Lemon Batteries
 Tapetricity Card
 Conclusion
Basic Circuits
 What do you have to have for an Electrical Circuit?
1. Energy Source
2. Conducting path
4.
1.
3. Load (Resistance)
2.
3.
4. Switch (not needed,
but usually present)
Conductors and Insulators
Conductors – material through
which electric current flows easily.
Insulators – materials through
which electric current does not
move easily.
Insulator –
Any material that does not allow
electric current to pass through it
•plastic
•cloth
•rubber
•wood
•glass
Conductor –
Any material that allows electric
current to pass through it
insulator
•copper
•aluminum
•steel
conductor
•any metal
Semiconductors
 A semiconductor is a substance, usually a
solid chemical element or compound, that
can conduct electricity under some
conditions but not others, making it a good
medium for the control of electrical current.
 Can you think of an example of a
semiconductor that we see every day?
LEDS
What is an LED?
 Light-emitting diode
 Semiconductor
 Has polarity
Applications of LEDs
LED: How It Works
 When current flows
across a diode
 Negative electrons move one way and
positive holes move the other way
LED: How It Works
 The holes exist at a
lower energy level
than the free electrons
 Therefore when a free electrons falls
it losses energy
LED: How It Works
 This energy is emitted
in a form of a photon,
which causes light
 The color of the light is determined
by the fall of the electron and hence
energy level of the photon
Inside a Light Emitting Diode
Transparent
Plastic Case
2. Terminal Pins
3. Diode
1.
How to Connect a LED:
 Requires 1.5~2.5V and 10 mA
 To prevent overloading, use resistor 470 Ω
Let’s make circuits
Squishy Circuits
Classroom Guide,
http://courseweb.stthomas.edu/apthomas/SquishyCircuits/PDFs/Squishy%20Circuits%20Classroom%20Guide.pdf
Conducting Clay
Look at handout instructions and watch video.
If video does not start go to this site:
http://www.youtube.com/watch?feature=player_embedded&v=cpUFL5LZpv4
Insulating Clay
Look at handout instructions and watch video.
If video does not start go to this site: http://www.youtube.com/watch?feature=player_embedded&v=Wz8rGNt-iEQ
Squishy Circuits
Make the Clay
Complete the introduction
Half make
conductive,
with color.
Half make
insulating,
no color.
Share with
another
group.
Challenge
1. Brainstorm.
Use conductive and insulating dough to make
battery-powered creatures that light up and/
or buzz. Ask each group to brainstorm possible
creature designs. What do they want the
creature to do? (have glowing eyes, make
a noise when pressed)
2. Sketch and build. Groups will draw sketches
and then agree on one design to build.
Draw here!
3. Test. Start small, like trying to
get one eye to light up, then once
you have accomplished this, move on to a
more complicated task, such as getting two
eyes to light.
4. Share. When everyone is done, have groups
demonstrate their creations and discuss.
Pointer: Dough does not
conduct as well as metal. You may find it helpful
to use short thick chunks of the dough (to reduce
resistance) or to increase the surface area of
the electrical contacts.
Lemon cell Batteries
 Go to the next part of your handout.
 For the remainder of our time today we will complete the




activities related to lemon cell batteries.
If you are not familiar with the use of a Digital handheld
Multi-meter, a helper will instruct and assist you with these
parts of the activity.
Be careful when cutting the lemons and make sure you
have wax paper on the table when doing this activity.
For the LED part of the lab, use one from the Squishy
Circuit kit you used earlier.
We will use pieces of copper wire instead of pennies.
Batteries- Lemon Cells
 Lemon Battery- hilaroad,
http://hilaroad.com/camp/projects/lemon/lemon_battery.html
 Lemon Battery video- Science Online,
http://www.youtube.com/watch?gl=CA&hl=en&v=AY9qcDCFeVI
Tapetricity Card
The build is simple:
Draw/create a picture in the medium of your choice: crayon,
pen, pencil, or even collage.
Figure out where you want your LED, and punch small sideby-side holes for the legs in that spot.
Tapetricity Card
On the back side, attach parallel strips of aluminum tape on either side of the
holes.
Push the LED legs through the holes, and then bend the legs in opposite
directions: negative (short leg) on one side, positive (long leg) on the other.
Tape the negative on one strip of aluminum and the positive on the other strip.
Tape a coin cell battery on the end of the negative aluminum tape side, negative
side down.
Tape some aluminum from the positive aluminum strip to the positive side of the
coin cell battery.
Conclusion
Answer the following Questions:
1. What makes up a simple circuit?
2. Give an example of an insulator and conductor.
3. Name 3 uses for LEDs.
4. What is a short circuit, when did this happen with
squishy circuits?
5. Would using lemons be a good way to power
electrical devices?
6. Does it make a difference what direction LEDs go in a
circuit?
Thank you