Download Alberta Reliability Standards Compliance Monitoring Program Applicability Assessment Request Form

Alberta Reliability Standards
Compliance Monitoring Program
Applicability Assessment Request Form
Please submit via email to: [email protected]
Review requested for:
PRC-004-AB1-1
Alberta Reliability Standard Identifier:
Analysis and Mitigation of Transmission and
Generation Protection System Misoperation
Alberta Reliability Standard Name:
Requirement (s):
Functional Entity Type:
PART I Entity Information:
New
Revised
Corporate Name
(Legal Name):
Other Name:
Corporate Address:
Province
/ State:
City:
Postal Code
/ Zip Code:
Registered entity contact for this request
Name:
Date:
Title:
Phone:
Fax:
Email:
PART II Submission Information:
Facility Name:
(i.e. Generation facility name, Transmission
line identifier, Transmission substation ID,
etc.)
AESO Identifier (if applicable):
(i.e. Asset ID, MPID)
Reason for request:
Version 3 – January 2, 2013
1
Please submit a copy of the following documentation with your Request Form:
The legal owner of a transmission
facility.
R1, R2.
Area single line diagram and station single line diagram showing
voltage levels and ownership of each of the applicant’s requested
transmission facilities (facility name) and connections, if any, to
generator facilities/generating units, other transmission facility
owners, and/or load facilities.
The legal owner of a generating
unit that:
(i) is not part of an aggregated
generating facility;
(ii) has a maximum authorized real
power rating greater than four point
five (4.5) MW;
(iii) is directly connected to the
transmission system or to
transmission facilities within the
City of Medicine Hat; and
(iv) has protection systems that
directly affect the reliability of the
bulk electric system which such
protection systems are those that
measure voltage, current, or
frequency from the generating unit
to the interconnected electric
system, but exclude the prime
mover and associated control
systems.
The legal owner of an aggregated
generating facility that:
(i) is directly connected to the
transmission system or to
transmission facilities within the
City of Medicine Hat;
(ii) has a maximum authorized real
power rating greater than four point
five (4.5) MW; and
(iii) has protection systems that
directly affect the reliability of the
bulk electric system. These
protection systems are those that
measure voltage, current, or
frequency from the aggregated
generating facility to the
interconnected electric system.
Version 3 – January 2, 2013
R1, R2.
Area single line diagram and station single line diagram showing voltage levels and ownership of each of the applicant’s requested
facilities (facility name) and connections, if any, to other transmission
facility owners, and/or load facilities.
R1, R2.
Area single line diagram and station single line diagram showing voltage levels and ownership of each of the applicant’s requested
facilities (facility name) and connections, if any, to other transmission
facility owners, and/or load facilities.
2
AESO USE ONLY
Date submitted by registered entity:
Version 3 – January 2, 2013
Date response issued to registered entity:
3