Download Dual Schottky Barrier Diode, 30 V, 2.0 A

SBS818
Ordering number : ENA0471A
SANYO Semiconductors
DATA SHEET
SBS818
Low VF Schottky Barrier Diode
30V, 2.0A Rectifier
Applications
•
High frequency rectification (switching regulators, converters, choppers)
Features
•
•
•
Low switching noise
Low forward voltage (IF=2.0A, VF max=0.52V)
Ultrasmall package permitting applied sets to be small and slim (Mounting height 0.75mm)
Specifications
Absolute Maximum Ratings at Ta=25°C (Value per element)
Parameter
Symbol
Repetitive Peak Reverse Voltage
Nonrepetitive Peak Reverse Surge Voltage
VRRM
VRSM
Average Output Current
IO
Surge Forward Current
Junction Temperature
IFSM
Tj
Storage Temperature
Tstg
Conditions
Ratings
V
30
V
When mounted on ceramic substrate (900mm2×0.8mm)
2.0
A
When mounted on glass epoxy substrate (0.96mm2×0.03mm)
1.5
A
50Hz sine wave, 1 cycle
20
A
--55 to +125
°C
--55 to +125
°C
Package Dimensions
Product & Package Information
unit : mm (typ)
7045-004
• Package
: EMH8
• JEITA, JEDEC
:• Minimum Packing Quantity : 3,000 pcs./reel
0.125
0.2
0.2
SBS818-TL-E
5
Packing Type : TL
TL
1
Marking
SD
2.1
1.7
8
Unit
30
Lot No.
0.2
4
0.5
0.05
0.75
2.0
1 : Anode1
2 : NC
3 : Anode2
4 : Anode2(NC)
5 : Cathode2
6 : Cathode2
7 : Cathode1
8 : Cathode1
Electrical Connection
8
1
7
2
6
3
5
4
*: Terminal 4 is used for the
purposes such as test. Although it is connected to
Anode 2, please handle it
as NC Terminal.
SANYO : EMH8
http://www.sanyosemi.com/en/network/
91912 TKIM TC-00002809/51408SB TIIM TC-00001363 No. A0471-1/6
SBS818
Electrical Characteristics at Ta=25°C (Value per element)
Parameter
Symbol
Reverse Voltage
Ratings
Conditions
min
VR
VF1
IR=1mA
IF=1.0A
VF2
VF3
IF=1.5A
IF=2.0A
Interterminal Capacitance
IR
C
VR=15V
VR=10V, f-1MHz
Reverse Recovery Time
trr
IF=IR=100mA, See specified Test Circuit.
When mounted in Cu-foiled area of
Forward Voltage
Reverse Current
Rth(j-a)1
Thermal Resistance
typ
30
V
0.37
0.42
V
0.42
0.47
V
0.46
0.52
V
350
μA
30
pF
10
900mm2×0.8mm on glass epoxy substrate
ns
100
°C / W
65
°C / W
2
When mounted on ceramic substrate (900mm ×0.8mm)
Rth(j-a)2
Unit
max
*: The absolute maximum ratings and electrical characteristics refer to those between Terminal 1 and Terminal 7 (or 8), and between Terminal 3
and Terminal 5 (or 6).
trr Test Circuit
50Ω
100Ω
10Ω
10μs
10mA
100mA 100mA
Duty≤10%
--5V
trr
Ordering Information
Device
SBS818-TL-E
Shipping
memo
EMH8
3,000pcs./reel
Pb Free
IF -- VF
3
2
IR -- VR
1.0E+06
Ta=125°C
100°C
1.0E+05
Reverse Current, IR -- μA
1.0
7
5
1.0E+04
°C
25
°C
0°C
--25
°C
75
°C
50
3
2
10
0
0.1
7
5
°C
12
5°
C
3
2
Ta
=
Forward Current, IF -- A
Package
0.01
7
5
3
2
75°C
1.0E+03
50°C
1.0E+02
25°C
1.0E+01
0 °C
1.0E+00
--25°C
1.0E-01
0.001
1.0E-02
0
0.05
0.10
0.15
0.20
0.25
0.30
0.35
Forward Voltage, VF -- V
0.40
0.45
0.50
IT12197
0
5
10
15
20
25
Reverse Voltage, VR -- V
30
35
IT12198
No. A0471-2/6
Rectangular
wave
(1)
1.4
(2) (4)
(3)
2.5E--03
Sine wave
180°
0.8
360°
(3)
360°
180°
VR
1.0E--03
0.4
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
0.2
0
0
0.5
1.0
1.5
0.0E+00
2.0
2.5
(5)
50
Rectangular
wave
25
Sine
wave
(3)
θ
360°
(2) (4)
(1)
100
Rectangular
wave
75
θ
360°
50
Sine
wave
(1)
0
(3)
(5)
100
7
5
3
2
2
3
5
7 10
Reverse Voltage, VR -- V
2
3
5
IT13217
1.5
2.5
2.0
Average Output Current, IO -- A
Surge Forward Current, IFSM(Peak) -- A
2
7 1.0
1.0
0.5
IT13216
IFSM -- t
24
3
5
(2) (4)
25
IT13215
f=1MHz
3
35
IT12200
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
(5)DC
125
2.5
2.0
C -- VR
5
2
30
360°
1.5
Average Output Current, IO -- A
10
0.1
25
0
1.0
0.5
20
180°
360°
0
15
Ta -- IO
180°
0
10
Average Reverse Voltage, VR -- V
150
100
75
5
0
IT12199
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
(5)DC
125
(4)
5.0E--04
Ta -- IO
150
Interterminal Capacitance, C -- pF
(2)
R
Sine wave
1.5E--03
0.6
(1)
360°
θ
Rectangular
wave
V
2.0E--03
Average Output Current, IO -- A
Ambient Temperature, Ta -- °C
(1)Rectangular wave θ=300°
(2)Rectangular wave θ=240°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
3.0E--03
360°
1.0
PR(AV) -- VR
3.5E--03
θ
1.2
Average Reverse Power Dissipation, PR(AV) -- W
PF(AV) -- IO
1.6
Ambient Temperature, Ta -- °C
Average Forward Power Dissipation, PF(AV) -- W
SBS818
Current waveform 50Hz sine wave
20
IS
20ms
t
16
12
8
4
0
0.01
2
3
5
7 0.1
2
3
Time, t -- s
5
7 1.0
2
3
IT13214
No. A0471-3/6
SBS818
Embossed Taping Specification
SBS818-TL-E
No. A0471-4/6
SBS818
Outline Drawing
SBS818-TL-E
Land Pattern Example
Mass (g) Unit
0.008 mm
* For reference
Unit: mm
1.9
0.4
0.3
0.5
No. A0471-5/6
SBS818
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for new introduction or other application
different from current conditions on the usage of automotive device, communication device, office equipment,
industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.)
prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be
solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer' s
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature,
high current, high voltage, or drastic temperature change, even if it is used within the range of absolute
maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a
confirmation.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of September, 2012. Specifications and information herein are subject
to change without notice.
PS No. A0471-6/6