Download Programming with TCP/IP

Programming with TCP/IP
Ram Dantu
1
Client Server Computing
 Although the Internet provides a basic
communication service, the protocol
software cannot initiate contact with, or
accept contact from, a remote computer.
Instead, two application programs must
participate in any communication with one
application initiates communication and the
one accepts it.
2
 In network applications, a SERVER
application waits passively for contact
after informing local protocol software
that a specific type of message is
expected, while a CLIENT application
initiates communication actively by sending
a matched type of message.
3
Identifying A Particular
Service
 Transport protocols assign each service a
unique identifier.
 Both client and server specify the service
identifier; protocol software uses the
identifier to direct each incoming request
to the correct server.
 In TCP/IP, TCP uses 16-bit integer values
known as protocol port numbers to identify
services.
4
Concurrent Server
 Concurrent execution is fundamental to servers
because concurrency permits multiple clients to
obtain a given service without having to wait for
the server to finish previous requests.
 In concurrent server designs, the server creates a
new thread or process to handle each client.
 Transport protocols assign an identifier to each
client as well as to each service.
 Protocol software on the server’s machine uses
the combination of client and server identifiers to
choose the correct copy of a concurrent server.
5
The Socket API
 The interface between an application
program and the communication protocols
in an operating system (OS) is known as
the Application Program Interface or API.
 Sockets provide an implementation of the
SAP (Service Access Point) abstraction at
the Transport Layer in the TCP/IP protocol
suite, which is part of the BSD Unix.
6
 A socket library can provide applications with a
socket API on an operating system that does not
provide native sockets (e.g. Windows 3.1). When an
application calls one of the socket procedures,
control passes to a library routine that makes one
or more calls to the underlying OS to implement
the socket function.
 A socket may be thought of as a generalization of
the BSD Unix file access mechanism (open-readwrite-close) that provides an end-point for
communication.
7
Functions needed
 Specify local and remote communication
endpoints
 Initiate a connection
 Wait for incoming connection
 Send and receive data
 Terminate a connection gracefully
 Error handling
8
Server
(connection-oriented protocol)
socket()
bind()
Socket system calls for
connection-oriented
protocol
listen()
accept()
blocks until connection
from client
Client
socket()
connection establishment connect()
read()
data (request)
write()
process request
write()
data (reply)
read()
9
Server
(connectionless protocol)
socket()
Socket system calls for
connectionless protocol
bind()
Client
recvfrom()
socket()
blocks until data
received from client
bind()
data (request)
sendto()
process request
sendto()
data (reply)
revfrom()
10
 Data communication between two hosts on
the Internet require the five components
of what is called an association to be
initialized: {protocol,local-addr, localprocess, foreign-addr, foreign-process}
 The different system calls for sockets
provides values for one or more of these
components.
11
Socket system call
 The first system call any process wishing to do
network I/O has to call is the socket system call.
 int sockfd = socket (int family, int type, int
protocol)
 Examples of Family include:


AF_UNIX
AF_INET
 Examples of Type include
 SOCK_STREAM
 SOCK_DGRAM
 SOCK_RAW
12
 The protocol argument is typically zero,
but may be specified to request an actual
protocol like UDP, TCP, ICMP, etc.
 The socket system call just fills in one
element of the five-tuple we’ve looked at the protocol. The remaining are filled in by
the other calls as shown in the figure.
13
local_addr,
protocol local_process
Connection-Oriented Server
socket() bind()
Connection-oriented Client
socket()
foreign_addr,
foreign_process
accept()
connect()
Connectionless Server
socket() bind()
recvfrom()
Connectionless Client
socket() bind()
sendto()
14
Specifying an Endpoint Address
 Remember that the sockets API is generic
 There must be a generic way to specify endpoint addresses
 TCP/IP requires an IP address and a port number for each
endpoint address.
 Other protocol suites(families) may use other schemes.
 Generic socket addresses
 (The C function that make up the sockets API expect structures of type
sockaddr.)
:
struct sockaddr {
unsigned short
sa_family;
//specifies the address type
char
sa_data[14];
//specifies the address value
};
15
AF_INET--TCP/IP address
 For AF_INET we need:

16 bit port number

32 bit IP address (IPv4 only)
struct sockaddr_in{
short
sin_family;
unsigned short
sin_port;
struct in_addr
sin_addr;
char
sin_zero[8];
};
 how these fields to be set and interpreted?
16
Network Byte Order Functions
Example:
struct sockaddr_in sin;
sin.sin_family = AF_INET;
sin.sin_port = htons(9999);
sin.sin_addr.s_addr = inet_addr;
unsigned short htons(unsigned short);
unsigned short ntohs(unsigned short);
unsigned long htonl(unsigned long);
unsigned long ntohl(unsigned long);
17
Bind System Call
 The bind system call assigns an address to
an unnamed socket. Example:


int bind(int sockfd, struct sockaddr_in
*myaddr, int addrlen)
18
The bind system call provides the values for the
local_addr and local_process elements in the
five_tuple in an association.
 An address for the Internet domain sockets is a
combination of a hostname and a port number, as
shown below:

struct sockaddr_in {
short sin_family ; /*typically AF_INET*/
u_short sin_port; /* 16 bit port number, network byte ordered */
struct in_addr sin_addr ; /* 32 bit netid/hostid, network byte
ordered */
char sin_zero[8]; /* unused*/
}
19
Connect/Listen/Accept System
Calls
 Connect
A client process connects a socket descriptor
after a socket system call to establish a
connection with the server.
 int connect(int sockfd, struct sockaddr_in
*servaddr, int addrlen)
 For a connection-oriented client, the connect
(along with an accept at the server side) assigns
all four addresses and process components of
the association.

20
 Listen
The listen system call is used by a connectionoriented server to indicate it is willing to
receive connections.
 int listen(int socket, int qlength)





allows servers to prepare a socket for incoming
connections
puts the socket in a passive mode ready to accept
connections
informs the OS that the protocol software should
enqueue multiple simultaneous requests that arrive at the
socket
applies only to sockets that have selected reliable stream
delivery service
21
 Accept
After the connection-oriented server executes
a listen, it waits for connection requests from
client(s) in the accept system call, e.g.,
newsockfd = accept(sockfd, peer, addrlen)
 needs to wait for a connection
 blocks until a connection request arrives
 addrlen is a pointer to an integer;

• when a request arrives , the system fills in argument
addr with the address of the client that has placed
the request and sets addrlen to the length of the
address.
• system creates a new socket, returns the new socket
descriptor
22

accept returns a new socket descriptor, which
has all five components of the association
specified - three (protocol, local addr,
local_process) are inherited from the existing
sockfd (which however has its foreign address
and process components unspecified, and hence
can be re-used to accept another request. This
scenario is typical for concurrent servers.
23
Sending and Receiving Data
 Here’s how you might read from a socket:

num_read = read(sockfd, buff_ptr, num_bytes)
 And here’s how you read from an open file
descriptor in Unix:
 num_read
= read(fildes, buff_ptr, num_bytes)
 There are other ways (with different
parameters) to send and receive data:
read, readv, recv, recvfrom, recvmsg to
receive data through a socket; and write,
writev, send, sendto, sendmsg to send data
through a socket.
24
sendto()--UDP Sockets
 int sendto(int socket, char *buffer, int length,
int
flags, struct
sockaddr *destination_address, int
address_size);
 For example:
struct sockaddr_in sin;
sin.sin_family = AF_INET;
sin.sin_port = htons(12345);
sin.sin_addr.s_addr = inet_addr("128.227.22.43");
char *msg = "Hello, World";
sendto(s, msg, strlen(msg)+1, 0, (struct sockaddr *)sin,
sizeof(sin));
25
recvfrom()--UDP Sockets
 Int recvfrom(int socket, char *buffer, int
length,
int flags, struct
sockaddr *sender_address, int
*address_size)
 For example:
struct sockaddr_in sin;
char msg[10000];
int ret;
int sin_length;
sin_length = sizeof(sin);
ret = recvfrom(s, msg, 10000, 0, (struct sockaddr *)sin,
&sin_length);
printf("%d bytes received from %s (port %d)\n", ret,
inet_ntoa(sin.sin_addr), sin.sin_port);
26
send() and recv() -- TCP Sockets
 int send(int s, const char *msg, int len, int
flags)
connected socket
 argument flags controls the transmission.

• allows the sender to specify that the message should be sent
out-of- band messages correspond to TCP’s urgent data
• allows the caller to request that the message be sent without
using local routine tables (take control of routine)
 int recv(int s, char *buf, int len, int flags)
 connected socket
 argument flags allow the caller to control the
reception
• look ahead by extracting a copy of the next incoming message
without removing the message from the socket
27
close() and shutdown()
 close(int socket)
For UDP sockets, this will release the ownership
on the local port that is bound to this socket
 For TCP, this will initiate a two-way shutdown
between both hosts before giving up port
ownership.

 shutdown(int socket, int how)
f the how field is 0, this will disallow further
reading (recv) from the socket.
 If the how field is 1, subsequent writes (send)
will be disallowed. The socket will still need to be
passed to close.

28
Relationship Between Sockets
and File Descriptors
 Socket handles are integer values. In UNIX, socket handles can be
passed to most of the low-level POSIX I/O functions.

read(s, buffer, buff_length); //s could be a file descriptor too

write(s, buffer, buff_length) ;
 Calling read on an open socket is equivalent to recv and recvfrom

if the socket is UDP, then information about the sender of the
datagram will not be returned
 Similarly the write function call is equivalent to send and sendto

UDP sockets may call connect to use send and write
 use the socket library functions instead of the file I/O equivalents.
29
Utility Functions
 unsigned int inet_addr(char *str)
 str represents an IP address(dotted-quad notation);
inet_addr will return it's equivalent 32-bit value in
network byte order.
 This value can be passed into the sin_addr.s_addr field of
a socketaddr_in structure
 -1 is returned if the string can not be interpreted
 char *inet_ntoa(struct in_addr ip)
 Converts the 32-bit value which is assumed to be in
network byte order and contained in ip to a string
 The pointer returned by inet_ntoa contains this string.
However, subsequent calls to inet_ntoa will always return
the same pointer, so copying the string to another buffer
is recommended before calling again.
30
Utility Functions ( cont’d )
 int gethostname(char *name, int length)

Copies the name (up to length bytes) of the
hostname of the local computer into the
character array pointed to by name
 struct hostent *gethostbyname(char
*strHost)
 int select (int nfds, fd_set *readfds,
fd_set *writefds, fd_set *exceptfds,
const struct timeval *timeout)
31
Others
 Include files

#include <sys/types.h>;
#include <arpa/inet.h>;
#include <signal.h>;
#include <errno.h;
#include <memory.h>;
#include <sys/socket.h>;
#include <netdb.h>;
#include <stdio.h>;
#include <sys/time.h>;
#include <netinet/in.h>;
#include <unistd.h>;
#include <fcntl.h>;
#include <stdlib.h>;
 Compiling and Linking
 Under most versions of UNIX (Linux, BSD, SunOS, IRIX)
compiling is done as usual:
• gcc my_socket_program.c -o my_socket_program

Solaris:
• cc my_socket_program.c -o my_socket_program -lsocket -lnsl
 Programming tips


always check the return value for each function call
consult the UNIX on-line manual pages ("man") for a complete description
32
Summary
 Network Application Programming Interface
(API)
 TCP/IP basic
 UNIX/C Sockets
socket() ; bind() ; connect() ; listen() ; accept() ;
sendto() ; recvfrom(); send() ; recv() ; read() ;
write();
 some utility functions

 Java Socket API
33