Download Blood Spatter Analysis

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts
Transcript
Bloodstain Pattern Analysis
CHAPTER 10
Introduction to Blood
Did you know
 You can loose up to 40% of your blood
volume and still survive.
 Beyond that and death is certain.
Conditions Affecting
Shape of Blood Droplet
 Size of the droplet
 Angle of impact
 Velocity at which the blood droplet left its origin
 Height
 Texture of the target surface


4
On clean glass or plastic—droplet will have
smooth outside edges
On a rough surface—will produce scalloping
on the edges
Kendall/Hunt Publishing Company
Passive
 Passive Bloodstains
 Patterns
created from the force of gravity
 Drop, series of drops, flow patterns, blood pools, etc.
Determining Distance Blood Falls
Drops form circle when hitting surface
 Size depends on speed of blood drop

Blood Spatter
Determining Distance Blood Falls
Faster drop = larger diameter (size)
 Higher distance = larger diameter


Due to air resistance, speed maxes out at
distances above about 7 feet
Blood Spatter
Determining Distance Blood Falls

However, size of drop also depends on the
volume of the drop.

Volume depends on object blood originated
from (needle = small; bat = large)
Blood Spatter
Since the volume of blood in a drop is
unknown…
The distance a drop has fallen
cannot be measured.
Effect of Surface
Smooth surface = smooth sphere
 Rough/porous surface may cause some
splatter

Transfer or Contact
 The pattern created when a wet, bloody object comes in
contact with a target surface; may be used to identify an
object or body part.
Projected bloodstains
–
–
–
Patterns that occur when a force is applied to the
source of the blood
Low, medium, or high impact spatters, cast-off, arterial
spurting, expiratory blood blown out of the nose, mouth,
or wound.
Narrow end of a blood drop will point in the direction of
travel.
Images from http://www.bloodspatter.com/BPATutorial.htm
Determining Direction
 By utilizing trigonometric functions its
possible to determine the impact angle for
any given blood droplet.
 SIN 0 = width (a)

length (c)
SIN < = Width (a) 1.5cm
Length (c) 3.0cm
Width (a) 1.5cm = SIN <
Length (c) 3.0cm
0.5 = SIN <
< = 30 degrees
Impact
 The more acute the angle of
impact, the more elongated the
stain.
 90 degree angles are perfectly
round drops with 80 degree
angles taking on a more elliptical
shape.
 At about 30 degrees the stain will
begin to produce a tail.
 The more acute the angle, the
easier it is to determine the
direction of travel.
Kendall/Hunt Publishing Company
17
Blood Spatter
Determining Direction of Blood

If more than one drop (from spatter) results,
the point of origin can be determined
Blood Spatter
Determining Direction of Blood

If more than one drop (from spatter) results,
the point of origin can be determined
Blood Spatter
For each blood
drop, a string
can be guided
back to the point
of origin.
Blood Evidence
 Class evidence for blood would include blood type.
If you can determine the DNA you would have
individual evidence.
 Blood stain patterns are considered circumstantial
evidence in a court room. Experts could argue
many points including direction of travel, height of
the perpetrator, position of the victim, left/right
hand, whether the body was moved, etc.
21
Kendall/Hunt Publishing Company
http://www.nfstc.org/links/animation
s/images/blood%20spatters.swf