Download Intro to MOSFETs

MOSFETs
Metal-Oxide-Semiconductor
Field Effect Transistors
Classes of Field Effect Transistors
• Metal-Oxide-Semiconductor Field Effect Transistor
– Which will be the type that we will study in this course.
• Metal-Semiconductor Field Effect Transistor
– MESFET
• Junction Field Effect Transistor
– JFET
• High Electron Mobility Transistor or Modulation Doped
Field Effect Transistor
– HEMT or MODFET
• Fast Reverse/Fast Recovery Epitaxial Diode
– FREDFET
• DNA Field Effect Transistor
– The conduction path is through a strand of DNA
Field Effect Transistors
• The conductivity (or resistivity) of the path
between two contacts, the source and the
drain, is altered by the voltage applied to
the gate.
– Device is also known as a voltage controlled
resistor.
Types of MOSFETS
n-channel
Enhancement Mode
(nMOSFET)
p-channel
Enhancement Mode
(pMOSFET)
n-channel
Depletion Mode
(nMOSFET)
p-channel
Depletion Mode
(pMOSFET)
Cross-Sectional View of n channel
planar Enhancement Mode Transistor
p channel
Enhancement Mode Transistor
n channel
Depletion Mode Transistor
p channel
Depletion Mode Transistor
Symbols for n channel
Enhancement Mode MOSFET
VGS ≥ 0V, VDS ≥ 0V
VTN is positive
Symbols for p channel
Enhancement Mode MOSFET
VGS ≤ 0V, VDS ≤ 0V
VTP is negative
Symbols for n channel
Depletion Mode MOSFET
Symbols for p channel
Depletion Mode MOSFET
PSpice MOSFET Symbols
• The IRF150 is an nMOS and the IRF9140 is a pMOS.
Both are enhancement mode transistors.
– The body terminal is connected to the source terminal on
the FET.
– “M” is used to denote that the device is a MOSFET.
MOS Capacitor
MOS Capacitor Under Bias:
Electric Field and Charge
Parallel plate capacitor
Accumulation
Positive gate bias
Electrons attracted to gate
Negative gate bias:
Holes attracted to gate
Depletion
Inversion
MOS Capacitor:
p-type semiconductor
Accumulation
Depletion
Inversion
Threshold Voltage
The gate voltage that causes the concentration of electrons
immediately under the gate oxide is equal to the
concentration of holes is called the threshold voltage.
• Enhancement mode FETs
• NMOS VG = VTN
• When enough electrons have been attracted to the oxide-semiconductor interface to
create a path for current to flow between the source and drain.
• PMOS VG = VTP
• When holes have been attracted to the oxide-semiconductor interface to create a path
for current to flow between the source and drain.
• Depletion mode FETs
• NMOS VG = VTN
• When holes have been attracted to the oxide-semiconductor interface to stop current
from flowing between the source and drain.
• PMOS VG = VTP
• When electrons have been attracted to the oxide-semiconductor interface to stop
current from flowing between the source and drain.
Capacitance
http://ecee.colorado.edu/~bart/book/
"
In Accumulati on Region, C  COX  COX
A
"
COX

 ox
TOX

 ox
TOX
MOSFETs
Enhancement mode
• Also known as Normally
Off transistors.
– A voltage must be applied
to the gate of the transistor,
at least equal to the
threshold voltage, to create
a conduction path between
the source and the drain of
the transistor before current
can flow between the
source and drain.
Depletion mode
• Also known as Normally
On transistors.
– A voltage must be applied
to the gate of the transistor,
at least equal to the
threshold voltage, to
destroy a conduction path
between the source and
the drain of the transistor to
prevent current from
flowing between the source
and drain.
Before electron
inversion layer is
formed
After electron
inversion layer is
formed
Family of ID Versus VDS Curves:
Enhancement-Mode nMOSFET
Triode/
Nonsaturation
VDS < VGS – VTN
VDS > VGS – VTN
Pinch-off/Saturation
Cut-off VGS < VTN
Family of iD Versus vDS Curves:
Depletion-Mode nMOSFET
Assuming that VTN < -1V
For this discussion
• I am going to emphasize the operation and
applications of n channel enhancement
mode FETs
Piecewise Model
Cut-off Region
VGS < VTN
VTN is positive
ID = 0 mA
Piecewise Model
Nonsaturation/Triode Region
VGS > VTN
VDS < VGS – VTN
ID ≤ 0 mA
VTN is positive
Piecewise Model
Saturation/Pinch-off Region
VGS > VTN
VDS > VGS – VTN
ID ≤ 0 mA
VTN is positive
Summary of I-V Relationships
Region
NMOS
VDS < VDS(sat)
Nonsaturation/
Triode
Saturation/
Pinch-off
VDS > VDS(sat)
W
1 2
I D  k (VGS  VTN )VDS  VDS 
L
2 
VDS
RDSon 
ID
'
n
kn'  W 
I D   [VGS  VTN ]2
2L
Transition between triode
and pinch-off
VDS(sat) = VGS - VTN
Enhancement Mode
VTN > 0 V, ID ≥ 0 mA, ID = IS, IG = 0 mA
Questions
• To increase the drain current ID at a particular VDS and VGS, should
you use a MOSFET with a larger or smaller W/L ratio?
• Compare the operation of two FETs, where MOS #1 has a smaller
VTN than MOS #2. Sketch the differences on a graph of ID-VDS.
• The microelectronics industry is working to decrease the channel
length L. If W is held constant, how will:
– the capacitance between the gate and the channel change?
– the time it takes for an electron to move from the source to the drain be altered?
– the value of VTN change?
– this modify RDSon for a particular set of VDS and VGS?
• The microelectronics industry is also working to decrease the
thickness of the gate oxide TOX and is researching high  and low 
dielectrics to replace silicon dioxide as the gate dielectric?
– If TOX decreases, how will the capacitance between the gate and channel
change?
– Should a low  or high  dielectric be used to increase the capacitance?