Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Certificate of Conformity This is to Certify Pall Corporation T/A Pall Australia Pall "QPoint" Filter Capsule & Pall "Aquasafe" Water Filters Will comply with the performance requirements of the Building Code of Australia: 1. AS/NZS 3497: 1998 Drinking Water Treatment Units. Subject to the following conditions and limitations: 1. Only to be installed by a suitably qualified tradesperson in accordance with the relevant standards and codes. Product purpose and/or use: Point-of-use filters designed to remove bacteria, protozoa, fungi, and particles from water supply and provide protection to patients and vulnerable users by acting as a barrier to these common waterborne pathogens, and thus reducing the risk of water associated nosocomial infection. Certification Holder: PALL CORPORATION T/A PALL AUSTRALIA Life Science, 1-2 Wandarri Court, Cheltenham, VIC, 3192 Certification Body CertMark Australasia Pty Ltd Unit 1/7 Windsor Road, Nambour QLD, Australia, 4560 www.certmark.com.au John Thorpe Director of Certification 11/12/2013 Date of Issue 12/02/2014 Date of Revision 11/12/2018 Date of Expiry This Certificate of Conformity is issued by CertMark Australasia Pty Ltd (ABN 98 154 306 804) who are accredited under JAS-ANZ (No. Z4450210AK) and IAS (PCA-123). All certifications are undertaken in strict accordance with ISO/IEC17065:2012. The product described on this certificate is certified compliant to the listed specific standard(s) in accordance with the relevant building codes and regulations subject to all limitations and conditions listed on the certificate. CMA only warrants the conduct of the certification process under ISO/IEC17065:2012 and disclaims to the extent permitted by law, all liability (including negligence) for claims of losses, expenses, damages and costs arising as a result of the use of the product(s) referred to in this Certificate. It is advised to check that this Certificate of Conformity is currently valid and not withdrawn, suspended or superseded by a later issue by referring to the CertMark website, www.certmark.com.au CMA-TT10010 Certification Number Accreditation Number Z4450210AK SCHEDUAL TO: CertMark Type Test Licence CertMark Australasia Pty Ltd hereby grants: Pall Corporation T/A Pall Australia Life Science 1-2 Wandarri Court, Cheltenham, VIC, 3192 CertMark Type Test Licence compliant to: 1. AS/NZS 3497: 1998 Drinking Water Treatment Units Product Description: Model PALL "QPoint" Filter Capsule Model Identification QJ22, QJ212 PALL "Aquasafe" AQ31F1S, AQ31F1S2, AQ31F1R, AQ31F1R2, AQF4, AQF42, AQIN, AQFROSE, AQ7FSN, AQ7FRN, AQ14F1S, AQ14F1R, AQF3, Certification Number: Issue Date: Expiry Date: Description Filter Capsules to be used primarily to produce water suitable for wound care for severely immuncompromised patients found in high risk areas. Can also be used for the rinsing of dental and medical equipment Point of Use filters indicated for the removal of bacteria, protozoa, fungi and particles from the water supply and is intended for the purposes of patient protection by providing a barrier to infection. Can also be used for the rinsing of dental and medical equipment. CMA-TT10010 11/12/2013 11/12/2018 Supersedes all other Schedules END OF RECORD This Certificate of Conformity is issued by CertMark Australasia Pty Ltd (ABN 98 154 306 804) who are accredited under JAS-ANZ (No. Z4450210AK) and IAS (PCA-123). All certifications are undertaken in strict accordance with ISO/IEC17065:2012. The product described on this certificate is certified compliant to the listed specific standard(s) in accordance with the relevant building codes and regulations subject to all limitations and conditions listed on the certificate. CMA only warrants the conduct of the certification process under ISO/IEC17065:2012 and disclaims to the extent permitted by law, all liability (including negligence) for claims of losses, expenses, damages and costs arising as a result of the use of the product(s) referred to in this Certificate. It is advised to check that this Certificate of Conformity is currently valid and not withdrawn, suspended or superseded by a later issue by referring to the CertMark website, www.certmark.com.au Accreditation Number Z4450210AK