Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Student’s Name with USN No. Guide Name HOD Name College Name, Dept CONTENTS: 1. Abstract. 2. Objective. 3. Block diagram. 4. Methodology. 5. Advantages and Disadvantages. 6. Applications. 7. Conclusion. 1.ABSTRACT: Bomb-disposal, or explosive ordnance disposal (EOD), robots are one of the many tools a technician might use to disarm dangerous weapons. Besides the human cost of losing a bomb technician in the field, training a bomb-disposal officer is significantly more expensive than buying a robot. As a result, maintaining a safe distance from a potential bomb is of paramount importance and only in extreme situations will the technician enter the blast range and put their hands on the device themselves. 2.OBJECTIVE: To make this device simple as well as cheap so that it could be mass produced and can be used for a number of purposes. The main aim of this project is to minimize the human cost of losing a bomb technician in the field, because human life is a very imporatent and also training a bomb-disposal officer is significantly more expensive than buying a robot. 3.BLOCK DIAGRAM: TRANSMITTER: KEY INPUTS FOR ROBOTIC ARM CONTROL XBEE TX ARM PROCESSOR +12 Volts +5 Volts 230 V, AC Supply TRANSFORMER RECTIFIER FILTER REGULATOR HARDWARE REQUIREMENTS: ARM 7 / Cortex M3, LCD, Relay Driver, Relays, Resistors, Capacitors, LEDs, Crystal, Diodes, Transformer, Voltage Regulator, Push Button. SOFTWARE REQUIREMENTS: Keil compiler uVision 4, Language: Embedded C or Assembly, WLPRO Programmer RECIEVER: BUFFER DRIVER RELAY XBEE RX ARM PROCESSOR LCD DISPLAY 4.METHODOLOGY: This project is developed to minimize the human cost of losing a bomb technician in the field, and training a bomb-disposal officer is significantly more expensive than buying an EOD robot. The main modules in this project are Key inputs, ARM controller unit and LCD display, XBee and Robot. The transmitter will be there at the Technician and the receiver will be there in the Robot. The transmitter module has Key inputs, ARM controller and XBee as a communication media. The receiver has XBee, ARM controller and Robot. If a Operator Presses a Switch to make the Robot to move, that information will be given to ARM controller, then the ARM controller analyses the signal and sends information to receiver which is present in the Robot via XBee. At the receiver the XBee receives a signal which was transmitted from the transmitter and sends that to the ARM controller. After receiving the signal the ARM controller will activate the Robot to move in a proper direction based on key pressed to diffuse the Bomb. 5.ADVANTAGES AND DISADVANTAGES: ADVANTAGES: Performs different tasks faster Makes an activity safer and easier Time saving Safety and life Saving. DISADVANTAGES: Requires Expertise It’s not self-sufficient A robot is a big investment 6.APPLICATIONS: Military reconnaissance mission. Wireless security and surveillance in hot spots. Search and rescue operation. Maneuvering in hazardous environment. Bomb disposal situations in any place. 7.CONCLUSION: We achieved our objective without any hurdles i.e. The Robotic ARM control for Bomb Diffuser Using XBee. As this project is based on microcontroller(ARM7LPC2148) and XBee technology is used to transmit data this can be of great use in the Field and to minimize to minimize the human cost of losing a bomb technician in the field. Since human life is always precious, these robots are the replacement. THANK YOU ANY QUESTIONS?