Download Presentation - Introducing student to unit

Level 2 Unit 5 Electrical and Electronic Circuits and Systems
Engineering Diploma
Level 2 Unit 5 Electrical and
Electronic Circuits and Systems
Electronic systems are in almost
every engineering system and
product. This unit will help you
learn the basis of electronic
circuits, how they are built and
how they work.
You will also learn how to recognise
the components that make up
electrical and electronic circuits and
understand how they work
together.
Level 2 Unit 5 Electrical and Electronic Circuits and Systems
L2 U5 Learning Outcomes:
■ Understand safe working practices in the workshop/ laboratory and
understand relevant electrical and electronic principles
 Be able to recognise and select components used in electrical and electronic
circuits
 Be able to construct an electronic circuit and understand its basic operating
principles
 Be able to test and find faults on electronic circuits.
Next >
Level 2 Unit 5 Electrical and Electronic Circuits and Systems
Electrical and Electronic Circuits
and Systems:
 Electronic systems have
revolutionised Engineering
 Some of the areas you will
cover in this module include:
 Electronic theory
 Electronic components
 Electronic control
 Circuit diagrams
 Test equipment
 Faultfinding
Next >
Level 2 Unit 5 Electrical and Electronic Circuits and Systems
Task 1
In this task you construct electronic circuits and
work out various values for circuit properties
■
You will be give a circuit diagram and components and have to safely
construct the circuit
■
Write a short report analysing the circuit
■
Calculate values for resistance, current, voltage and power in circuit
■
Calculate the size of a fuse needed in a mains appliance.
Next >
Level 2 Unit 5 Electrical and Electronic Circuits and Systems
Task 2
You will be asked to identify electronic
components both physically and from electronic
circuit diagrams.
■
You will be given 12 different electrical/electronic components. Identify as
many as you can
■
You will been given an electronic circuit diagram and need to select two
suitable components for use in the circuit
■
You will been given another electronic circuit diagram and need to select a
further two suitable components for use in this circuit.
Next >
Level 2 Unit 5 Electrical and Electronic Circuits and Systems
Task 3
You will need to carry out fault finding on
circuits using test equipment
■
You will be given an electronic circuit and appropriate test equipment.
Measure and record the following: Voltage, Supply current, Input
waveform, Output waveform
■
You have been given an electronic circuit, which has a fault on it. Use
the information and test equipment to locate the fault
■
You have been given a second electronic circuit, which has a fault on it.
Use the information and test equipment to locate the fault.
End >