Download Lecture 2 - De Anza College

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts
no text concepts found
Transcript
Fog, dew and clouds
Meteorology 10
Prof. Jeff Gawrych
1
Dew: air cooled to dewpoint
Frost: air cooled to dewpoint, but temp is at or below freezing
point
How can clouds form?
•
Air needs to be cooled to saturation. I.e. air
cooled to dew point. I.e air reaches 100% RH
1) As air rises, it cools
* How to force air to rise:
–
–
–
–
Topography
fronts
convection
Convergence ---> <----
2) Surface cools off quickly by emitting radiation
3) Air moves over colder surface/ into cooler area
4
Three types of fog
1) Radiation fog
– When surface cools off rapidly and reaches saturation.
– A.k.a Valley fog/Tulle fog because it frequently occurs
in the wintertime in the valleys (Sacramento/San
Joaquin Valleys)
– A low, extremely dense fog
– Happens best on calm, clear days when radiation can
most easily escape back to space.
– Fog forms more easily on cold days because cold air
cannot hold as much moisture as warm air
– Why do valleys get colder than surrounding areas?
5
Radiation fog
Three types of fog
2) Advection fog
– When warmer air moves over a colder surface, the air
may be cooled to saturation
• Advection = movement
– This is the SF/west coast fog that happens here, most
commonly in late spring/summer
– Why? Because sea surface temperatures (SST) close to
the shore are much cooler than SSTs just a little bit
offshore.
– Upslope fog: As air moves up a slope, the gradually
cooling air may cool to saturation and form fog
7
Advection fog
8
Three types of fog
3) Evaporation fog
– A.k.a steam fog.
– Explains why you can see your breath on cold
days.
– The warm, moist air from your mouth brings
the outside air to saturation, creating a cloud.
– Usually evaporates quickly.
9
Evaporation/steam fog
# of days with fog
Cloud characteristics
• Clouds are identified by their height (low, medium
and high) and by their visual characteristics (flat or
puffy).
• The four basic cloud groups are:
–
–
–
–
Cirrus: _________________________
Cumulus: _______________________
Stratus: ________________________
Nimbus: ________________________
12
Where do these terms come
from?
• The basic classification terminology has Latin
roots:
– Stratus (Latin for "layer") to describe sheet-like (stable)
clouds.
– Cumulus (Latin for "puffy") to denote a cloud with
some puffy vertical (unstable) extent.
– Cirrus (Latin for "curl of hair") denotes a wispy high
level cloud.
– Nimbus (Latin for "violent rain") means a rain cloud.
13
Cloud Classification
As a first distinction, we classify
clouds by the height of the
cloud base.
LOW CLOUDS
• Low clouds have a base
below 5000ft.
• Stratocumulus (Sc),
Stratus (St) and are the
primary low-level clouds
15
Cloud Classification
MIDDLE CLOUDS
• Middle Clouds have a cloud
base in the range of 2 - 7 km
(6000-23,000ft).
• Altostratus (As) and
altocumulus (Ac) are the
primary middle level clouds.
17
Cloud Classification
HIGH CLOUDS
• High clouds typically refer
to clouds with a base
above 7 km (23,000ft)
altitude.
• Cirrus (Ci), Cirrostratus
(Cs), and Cirrocumulus
(Cc) are all high level
clouds.
19
Cloud Classification
• High level clouds tend to be
fuzzy in comparison to low
level clouds.
• This is primarily because
high level clouds are made
of ice crystals instead of
droplets.
• Ice crystals usually
evaporate slowly and thus
have more time to diffuse.
20
Cloud Classification
Three primary cloud classes overlap the height bands:
– Cumulus (Cu)
– Cumulonimbus (Cb)
– Nimbostratus (Ns)
“nimb-” defines that the cloud is precipitating.
“cumul-” defines that the clouds are a result of convection.
“strat-” defines that the clouds are layered clouds.
Various terms are commonly intermixed and aren’t limited
to any given altitude.
21
25
26
27
28
31