Download Chapter 4

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Electromagnetism wikipedia , lookup

Lorentz force wikipedia , lookup

Fictitious force wikipedia , lookup

Gravity wikipedia , lookup

Free fall wikipedia , lookup

Centrifugal force wikipedia , lookup

Weightlessness wikipedia , lookup

Transcript
Chapter 4
Equilibrium Under the Action of
Concurrent Forces
CONCURRENT FORCES


Concurrent forces are forces whose lines of
action all pass through a common point.
The forces acting on a point object are
concurrent because they all pass through the
same point, the point object.
EQUILIBRIUM

AN OBJECT IS IN EQUILIBRIUM
under the action of concurrent forces
provided the object is not accelerating.
FIRST CONDITION FOR
EQUILIBRIUM

F  0
Fx  0
Fy  0
Fz  0


This condition is sufficient for
equilibrium when the external forces
are concurrent.
A second condition must also be
satisfied if an object is to be in
equilibrium under non-concurrent
forces.
PROBLEM SOLUTION METHOD
(CONCURRENT FORCES)
(1) Isolate the object for discussion.
(2) Show the forces acting on the isolated
object in a free-body diagram.
(3) Find the rectangular components of each
force.
(4) Write the first condition for equilibrium in
equation form. (Actually write Newton’s
Second Law and set the acceleration equal
to zero.)
(5) Solve for the required quantities.

THE WEIGHT OF AN OBJECT is essentially
the force with which gravity pulls downward
upon it.

THE TENSILE FORCE acting on a string or
cable or chain (or indeed, on any structural
member) is the applied force tending to
stretch it. The scalar magnitude of the
tensile force is the tension.

THE FRICTION FORCE is the tangential
force acting on an object that opposes the
sliding of that object across an adjacent
surface with which it is in contact. The
friction force is parallel to the surface and
opposite to the direction of motion or of
impending motion.

THE NORMAL FORCE on an object that is
being supported by a surface is the
component of the supporting force that is
perpendicular to the surface.

PULLEYS
Statement in text is confusing at best.
Examples will be discussed as they
occur.