Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
DATA SHEET Anue Net Tool Optimizer® 5204 Small Enterprise Network Monitoring Switch Performance 10MB to 10GE Ethernet support Non-blocking architecture Port reconfiguration with no performance impact Overview The Ixia Anue Net Tool Optimizer® (NTO) 5204 is a cost effective network monitoring switch for networks that primarily require 1GE copper interfaces for network and security monitoring tools. It is well suited for small enterprises and is ideal in the lower speed portions of the network, such as the access layers, or where a large number of 1GE monitoring tools need access to network traffic. The Anue NTO 5204 has the same intuitive drag-and-drop control panel that is used by the entire family of Ixia’s 5200 Series, allowing complete configuration of the system. Changes in monitoring requirements are handled easily and do not require network change board approval because no additional physical connections are required. Software updates and licensing are performed quickly and efficiently through the same control panel. The Anue NTO 5204 includes two module slots to allow the addition of up to four additional 10GE ports using the Network Visibility Solutions 5200 Series expansion modules. Modules are available to support CX4, XFP and SFP+ interfaces. An available remote power supply offers a redundant power source for high availability configurations. 26601 Agoura Road | Calabasas, CA 91302 USA Document No.: 915-6500-01 Rev C | Full line rate across all ports with filtering enabled Port Flexibility Port Flexibility Ports 21-24: Up to 1GE copper (RJ45) or 1GE fiber (SFP) Modular Ports 1-4: Up to 10GE fiber Ingress/Egress port programmability Software port licensing Monitoring tool port load balancing Up to 28 ports available Ports 1-20: Up to 1GE copper (RJ45) Flexible Port Interconnections with additional Anue 5200 series product Tel + 1-818-871-1800 | | www.ixiacom.com November 2013 - Page 1 DATA SHEET Management SNMP v1, v2, v3 support TACACS+, RADIUS, and local support (members and groups) Granular access control features Event logging Syslog IT Automation control (RESTful API) IP based management port (RJ45 – 10/100/1000) Filtering Centralized filter templates Overlapping Filter Engine Filter parameters (Layer 2-4) VLAN and Ethertypes MAC Source/Destination addresses IP protocol and DSCP/TOS Source/Destination IP (IPv4) UDP, TCP Ports Physical Specifications Size and Weight 1U high 19” rack mountable enclosure Dimensions: 17.3W x 12L x 1.75H (inches) Weight: 12.6lb (5.7 kg) Power AC Input AC Voltage: 90-240 VAC RMS auto-switching Frequency: 50-60Hz Nominal power requirement: 1.27A @ 110 VAC, 140W Maximum power requirement: 2.67A @ 110 VAC, 294W Heat/Power Dissipation: nominally 140Watts / 478 BTU/hour Power DC Input DC Voltage: 12 V DC Nominal power requirement: 10A @ 12 VDC, 120W Maximum power requirement: 21A @ 12 VDC, 250W Page 2 DATA SHEET Operating Specifications Environmental Operating temperature: 0 to 30 °C Operating humidity: 10 to 85%, noncondensing Fans: Automatic temperature-controlled DC fans (right to left airflow) Shock and Vibration ETSI 300 019 Regulatory/Safety North American Safety North American Safety UL 60950-1, 2nd Edition EMI/EMC North American EMC North American EMC FCC part 15, Class A (USA) ICES-003 Issue 4, Class A (Canada) European EMC EN55022 2006 Class A (Emissions) EN55024 1998 w/A2 (Immunity) EN61000-3-2:2006 (Harmonics) EN61000-3-3 1995 w/A2 (Flicker) IEC/International EMC IEC/EN 61000-4-2:2001 Electrostatic Discharge Immunity IEC/EN 61000-4-3:2002 Radiated Immunity IEC/EN 61000-4-4:2001 Transient/Burst Immunity EN61000-3-3 1995 w/A2 (Flicker) IEC/EN 61000-4-5:2001 Surge Immunity IEC/EN 61000-4-6:2001 Conducted Radio Frequency Immunity IEC/EN 61000-4-11:2004 Voltage Dips, Interruptions and Variations RoHS Compliant Page 3 DATA SHEET Included Accessories AC power cord USB flash drive with activation license key Front rack mount kit Ordering Information Complete Systems SYS-5204-FIB Anue Net Tool Optimizer 5204 – base system with four 1GE dual media and one 1GE copper RJ-45 ports enabled (5x1GE total) SYS-5204-COP Anue Net Tool Optimizer 5204 – base system with five 1GE copper RJ-45 ports enabled (5x1GE) SYS-5204-TEN Anue Net Tool Optimizer 5204 – base system with four 1GE dual media, four 1GE copper RJ-45, and two 10GE SFP+ ports enabled (8x1GE & 2x10GE) SYS-5204-ALL Anue Net Tool Optimizer 5204 – base system with all ports enabled: 20 RJ-45 10/100/1000 ports, four dual media ports (RJ-45 or SFP), and 4 10GE SFP+ ports SYS-5204-SPARE Anue Spare Net Tool Optimizer 5204 – cold spare system with no ports enabled. Includes short-term license to be installed to activate unit when required. 1 Gig Copper Licenses LIC-P5200-G1C 1GE Copper, RJ-45 Port – 10/100/1000 Base-T, quantity One LIC-P5200-G4C 1GE Copper, RJ-45 Ports – 10/100/1000 Base-T, quantity Four LIC-P5200-G8C 1GE Copper, RJ-45 Ports – 10/100/1000 Base-T, quantity Eight LIC-P5200-G15C 1GE Copper, RJ-45 Ports – 10/100/1000 Base-T, quantity Fifteen 1 Gig Optical Licenses LIC-P5200-G1D 1GE SFP Port – quantity One (transceiver not included) LIC-P5200-G4D 1GE SFP Ports – quantity Four (transceiver not included) Page 4 DATA SHEET Ordering Information 10G Module Cards (In Back of Unit) MOD-P5200-X2C 10GE Copper CX4 Ethernet Ports - quantity two. 10m distance. Transceivers integrated with port. MOD-P5200-X2O-X 10GE Optical XFP Ethernet Ports - quantity two. Ports can be set as XFP-SR, and XFP-LR with transceivers. MOD-P5200-X2D-PLUS 1GE/10GE SFP/SFP+ Ethernet Ports - quantity two. Ports can be used with SFP or SFP+ transceivers. Page 5