Download E10 Quick Reference

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Wireless security wikipedia , lookup

TV Everywhere wikipedia , lookup

AppleTalk wikipedia , lookup

Net bias wikipedia , lookup

Distributed firewall wikipedia , lookup

Computer network wikipedia , lookup

Video on demand wikipedia , lookup

Airborne Networking wikipedia , lookup

Network tap wikipedia , lookup

Recursive InterNetwork Architecture (RINA) wikipedia , lookup

Wake-on-LAN wikipedia , lookup

List of wireless community networks by region wikipedia , lookup

Piggybacking (Internet access) wikipedia , lookup

Cracking of wireless networks wikipedia , lookup

Zero-configuration networking wikipedia , lookup

Transcript
Quick Reference Guide of WebEye E10
This information is to connect WebEye E10 on Internet of
dedicated line or local LAN. For different lines like xDSL,
cable and ISDN, please visit Client Support page in WebGate
Internet homepage and download related information.
http://www.webgateinc.com
WebGate Inc.
I. Monitoring of real-time images through WebEye E10
1. PC and LAN requirements
1.1 PC requirements
l CPU: Pentium II and above
l RAM: 64MB and above
l O/S: Windows 98/NT/2000
1.2 Check display setting in your PC.
2. Select ‘Settings ’.
1. Go to PC Desktop, right click
the mouse on the background.
3. Set color at ‘high
4. Set resolution at
Scroll down to “Properties”
color
‘1024x768
(16bit)’
or
above’.
pixels’
or above.
5. Click ‘OK’ button.
1.3 Check Network Setting for PC.
1 Right click the ‘Network
Neighborhood’ icon.
3 Scroll down to
2. Scroll down to
‘Properties’.
‘TCP/IP’
and
configure settings for
Ethernet card.
4. Click on ‘Properties’
5. Go to ‘Gateway’
7. Go to ‘IP Address’
6. Check gateway address.
8. Check IP
address and Net
mask.
1.4 Internet Browser Requirements
l Internet Explorer 4.0 and above
l Netscape Navigator 4.5 and above
1.5 Check LAN
l The WebEye should be connected to a 10 Base-T LAN. 10 Base-T LAN is standard for
network configuration.
l In the rare instance of 100 Base-T LAN, a 10/100 switching hub will be needed to
convert 100 Base T to 10 Base T.
2. Connecting Ethernet and Power Cables to WebEye.
2.1 Connect network and power to WebEye .
l Make sure that indicator lights and dipswitches are as follows.
2. The power input jack.
Use the included 5-volt
1. Connect LAN
cable (RJ-45).
3. The green LED should blink
every 1-2 second(s) 1-2 seconds
after receiving power.
power adapter.
4. After receiving power, yellow LED
should go on for 5-6 seconds and then
go off. This LED starts to blink when
user accesses WebEye.
2.2 Connect WebEye and a PC with Network Cable.
l To connect WebEye on Internet or LAN. With this connection remote user may not
access WebEye before local user configure its network setting.
Dedicated line, xDSL line, cable
modem line, ISDN line, and PSTN
Internet
(telephone) line are available.
Router
HUB
Remote User
Direct cable
Local User
Connect WebEye to a
PC through a HUB.
l To directly connect WebEye to a PC, use the red crossover cable. This connection is just
to configure WebEye.
Crossover cable
Connect WebEye directly to
a PC through LAN ports.
* Cross over Cable and Direct Cable *
The crossover cable (red) provided with the WebEye is used to connect the WebEye with a PC. A
HUB is not necessary to connect the WebEye to a PC if a crossover cable is used. The direct cable
(white) should be used if a HUB is used as an intermediary between the WebEye and PC.
3. Install WebEye Setup program in your PC
l Copy WebEyeSetup.exe file from the enclo sed CD (or Diskette).
l Paste the file into your PC
l Click the file on your PC to activate Setup program.
4. Assign IP address to WebEye with Setup program.
l Activate Setup program and assign a new IP address to WebEye.
l Change IP address from default one to a new one available on your local
network. Connected on a same local network, any IP address of WebEye
appears on Setup window even if the IP address is from remote network range.
l A user on the local network may access WebEye, when WebEye is assigned a
pro per IP address of the local network, though if gateway address, broadcast
address and network mask are not assigned properly. However remote user
cannot access the WebEye without assigning its gateway address, broadcast
address and network mask properly.
l Even when you connected directly WebEye to a PC, you cannot access
WebEye if you don’t assign WebEye with local IP address
1. Select the default IP address of
WebEye (211.53.133.92).
5. After changing IP address, the
new IP address appears. Click on
the IP address.
2. & 6. The selected IP address
appears (211.53.133.92).
3. Enter Admin’s
password. Default
4. Click this button to change IP
password is ‘admin’.
address. Upon clicking the button,
a new window appears where you
change IP address.
7 . Click ‘Start Configuration’ button, to
access WebEye through Internet and
configure administration conditions.
* IP Address and MAC Address *
IP Address
IP address is an identification code for computers and devices on a TCP/IP network. Networks using
TCP/IP protocol route messages based on the IP address of the destination. Within a closed network,
IP addresses can be assigned at random as long as each one is unique. However, connecting a private
network to the Internet requires using registered IP addresses to avoid duplicates. IP address can be
acquired from a network administrator or an I nternet service provider.
MAC Address (Media Access Control Address)
MAC address is a hardware identification code that uniquely identifies each node of a network. The
M AC layer interfaces directly with the network media. Consequently, each type of network media
requires a different MAC layer. The MAC address of WebEye is a 12-digit number. A unique MAC
address can be found on the label at the bottom of each WebEye.
l Please note!!
When an IP address is assigned to the WebEye, be careful not to assign the
WebEye with an IP address that is not compatible with the local network or
that is already in use by another computer or similar device. Please refer
below example and assign an IP address to WebEye.
Gateway address
192.168.1.1
Subnet mask
255.255.255.0
Broadcast address
192.168.1.255
Already used IP address
192.168.1.2 ~ 192.168.1.50
Available IP address for WebEye
192.168.1.51~ 192.168.1.254
However, if there is a subnet mask of 255.255.255.128, then IP addresses
from 192.168.1.129 to 192.168.1.255 are not in the same local network as the
IP address of 192.168.1.1 to 192.168.1.128.
5. Configure administrator’s condition.
l
By clicking ‘Start Configuration ’ button on setup program, you may access
WebEye administration page through Internet.
5.1 Select ‘Network Configuration’ in the menu and configure.
1. Click ‘Ethernet’ button.
2. Check if IP address is same
3. Set Netmask.
as assigned at Setup program.
5. Set gateway address. If an unavailable
address is assigned, a popup message
informs to assign the address properly.
6. Click ‘Apply’ button.
5.2 Select ‘Video Configuration’ in the menu.
3. Skip this step for the built in
CCD. However by clicking
1. Select ‘Video Channel
#0’ among 4 channels.
‘B/W’, B/W images can be
2. Select ‘Enable’ to
use this channel.
viewed from the built in CCD.
4. Choose proper type
5. Click ‘Apply’ button.
between NTSC and PAL.
6. Access WebEye image viewer and configure watching condition
6.1 Enter IP address and access WebEye image viewer
1. Enter IP address of your WebEye in the address bar
of the Web browser (e.g. http://192.168.1.51) and press
‘Enter ’ key.
5. Check user name and password.
Default values do not require retyping.
6. Click ‘Login’ button to
access
real-time
image
viewer.
2. Click ‘WebEye Plug-in’
Netscape Navigator users.
menu, for
* This step is for Netscape
Navigator
users
only.
Internet Explorer users
can s kip this step.
3. Click ‘Download WebEye
Plug-in Now!’ button.
* This step is for Netscape
Navigator
users
only.
Internet Explorer users can
skip this step.
4. Click ‘Grant’ button. ‘Install
Successfully
Completed’
will
appear. Click ‘Confirm’ button.
* This step is for
Explorer users only.
Netscape
users can
disregard this step.
7. Click ‘Yes’ button to download and install Active-X into
your PC. After download of Active-X plug-in, real-time
images can be seen.
l If you experience a case that Active-X for Internet Explorer or Plug-in for
Netscape Navigator is not installed into your PC properly, please visit ‘Client
support ’ page in WebGate Internet homepage (http://www.webgateinc.com). And
download a program to install Active-X or Plug-in manually.
1. Click ‘Client Support’ menu.
3. Click ‘WebEye Plugin/ActiveX –
Manual
2. Click ‘WebEye’ at
‘Technical Support’ menu.
download
Installation’
installation
article.
program
install it following the description.
Then
and
7. Adjust focus and view real-time images.
7.1 Adjust lens focus.
l Turn the lens right or left to adjust focus .
Turn this part left
or right to adjust
focus.
7.2 Manage the real-time image viewer.
Set the desired viewer option. Simple viewer, normal
viewer, java applet viewer, server-push viewer, and
snap shot viewer configurations are available in this
menu. For more information, please refer to User ’s
guide.
Resolution, image size, and
Images can be viewed in this section. To
transmission frame rate can be
view other channels, connect external
altered in the scroll bars. After
cameras and configure settings properly.
setting desired configurations,
For more information, please refer to
click ‘here’ menu.
User ’s guide.
The Reference Guide has so far covered installation and
usage of the internal camera of the WebEye. The below
sections
cover
channels
and
basic information on usage of external
viewing
through
firewalls.
For
detailed
information , please refer to the WebEye User’s Guide.
II. Connecting external camera.
1. Connecting external camera to WebEye
1.1 Connection diagram.
Video
signa l
flows
Video signal flows
through LAN Cable.
through BNC Cable.
PC
CCTV Camera
1.2 Connecting external camera (Ch#1) to WebEye
l Connect an external CCTV camera to WebEye
l WebGate provides a video input/output connector optionally.
l Enter WebEye administrator ’s page and configure.
1. Enter ‘Video Configuration’ page
3. Choose ‘Color ’ or
‘B/W’ according to
and select ‘Video Channel #1’
among 4 channels.
external camera type.
2. Select ‘Enable’ to
use the channel.
4. Choose either NTSC or PAL
according to external camera type.
5. Click ‘Apply’ button.
2. Connecting WebEye to a CCTV monitor
l Connection diagram
Video signal flows
through BNC Cable.
l Connect a CCTV monitor to WebEye through DB-15 port
3. Connecting WebEye to a PC and a CCTV monitor
l Connection diagram.
Video
signal
flows
Video signal flows
through LAN Cable.
through BNC Cable.
l WebEye E10 can be connected with a CCTV monitor through coaxial cable as
well as a PC through LAN cable. However when WebEye E10 is connected with
both CCTV monitor and a PC at the same time, the video quality on CCTV
monitor is not as good as on a PC. When only a CCTV monitor is connected to
WebEye E10, its video quality is as fine as a PC is connected to WebEye E10.
III. Connecting WebEye through firewall.
1. WebEye is blocked with firewall.
l If there is a firewall in the network where WebEye is connected, enter WebEye
administrator’s page and change TCP ports.
1. If default port (80) is blocked, change
Web server TCP port to any other port that
is open and is not occupied already on the
network.
2. If default port (8080) is blocked, change Video server TCP port to
any other port that is open and is not occupied already on the
network.
2. Click ‘Apply’ button.
l Access WebEye through Internet browser.
4. If you have set IP address as ‘192.168.1.51’
and changed Web server TCP port as ‘81’, key in
‘http://192.168.1.51:81’. Then press ‘Enter ’ key.
2. User’s PC is blocked with firewall.
l If there is a firewall on the network where your PC is connected, enter WebEye login
page with IP address ‘http://192.168.1.51’.
l Enter ID and password.
l Click ‘Login’ button to enter default viewer.
l Click ‘More service’.
l Click ‘Server-Push’ to enter server -push viewer.
l Then enjoy real-time image that is transmitted through Web server port on
your Network.
This image is transmitted through
Web server port on your network.
To monitor more efficiently, refer
to WebEye User ’s Guide
IV. Description on DB-15 port
I2- & I2+ (No. 8 & 9)
+5V (No.12)
DC 5V(+) power pin.
Isolated input pins.
NC (No. 13 & 15)
Not used pins.
VIN (No. 11)
Video input pin
GND (No. 14)
Ground pin.
I1+ & I1- (No. 6 & 7)
Isolated input pins.
VOUT (No. 10)
Video output pin.
GND (No. 5)
TX1 & RX1 (No. 1 & 2)
TX2 & RX2 (No. 3 & 4)
RS-232C communication pins.
RS-232C communic ation pins.
Ground pin.
For more detailed information on how to install PTZ
mechanism, external sensor and relay, please visit ‘Client
Support ’ page in WebGate Internet homepage and download
related information.
http://www.webgateinc.com