Download Integrated Receiver Decoder

Product Specification / DVD922
Integrated Receiver Decoder
DVD922 is a Integrated Receiver Decoder designed to be used in
CATV network Headend. DVD922 can be used for receiving both
free-to-air and scrambled DVB services, and it can be used both
for DVB-S and DVB-S2 reception.
DVD922 is a Integrated Receiver
Decoder designed to be used in
CATV network Headend. DVD922
can be used for receiving of both
free-to-air and scrambled DVB services, and it can be used both for
DVB-S and DVB-S2 reception.
DVD922 front end has both DVB-S
and DVB-S2 demodulators thus making
it possible to receive the latest most
advanced transmission schemes and
exploiting the increased capacity of
DVB-S2. It also provides future proof
video decoding solution supporting the
migration from MPEG2 to MPEG4 AVC
and supports seamless migration from
SD to HD picture quality.
Where digital signal transport is
needed DVD922 is equipped with ASI
output in order to support that purpose. It is also equipped with dual CI
slots with optional multi scrambling
capability gives possibility to descramble the whole multiplex if supported by
CA module. The DVD922 also provides
high quality video and symmetric audio
outputs supporting HD to SD conversion and audio down mixing. It also
include sophisticated service acquisition supported by versatile audio and
subtitling language and modes selections.
Robust operation and automatic
recovery from errors are matter of
course to this product. The DVD922
is also fully configurable using CATVisor Commander and a wide range of
monitoring functions ensure reliable
operation.
DVD922 is fully compatible with DVX
Headend System, and can be installed
in standard DVX001 installation frame.
Features
•
Block diagram
PCMCIA
Integrated Receiver Decoder module for
Cable TV headend solutions
•
VIDEO
Compliant with DVB-S2 broadcasting ap-
•
•
•
•
•
Dual Common Interface slot for CA Modules
AUDIO
PCMCIA
plications as defined in ETSI 302 307
DVB-S2 (S) Front End
Common Interface
MPEG2
MPEG4 AVC MP
HD to SD
MPEG1L2
AAC
MPEG Decoder
Multiservice descrambling support
ASI output for digital transport
ASI
MPEG2 and MPEG4 AVC HD/SD decoder
ASI Interface
High quality video and balanced audio outputs
•
•
Automatic error recovery
Fully configurable using Teleste’s CATVisor
Commander software
•
Robust and reliable mechanics
Technical specifications
Parameter
Specification
Note
Satellite IF Input
Parameter
Specification
Note
Video output
Impedance
75 ohm
Impedance
75 ohm
Return loss
9 dB
Return loss
30 dB
Frequency range
950...2150 MHz
1 MHz step
Level
1 Vpp
Channel bandwith
10...34 MHz
automatic adjustment
Adjustment range
± 18 %
Input level range
-65...-25 dBm
Flatness
± 0.5 dB
AFC range
Adaptive, according to symbol rate
Video format
PAL
DVB-S/S2 reception
0.1...5 MHz
Audio Output
Modulation
QPSK
(DVB-S)
Impedance
<30 ohm
QPSK, 8PSK
(DVB-S2)
Output level
1.55 Vrms
Roll-off factor
0.35
(DVB-S)
Adjustment range
+6...-12 dB
0.20, 0.25, 0.35
(DVB-S2)
Frequency range
40...20000 Hz
Symbol rate
1...45 Mbaud
(DVB-S)
Flatness
±0.5 dB
1...36 Mbaud
QPSK (DVB-S2)
THD
0.2 %
1...30 Mbaud
8PSK (DVB-S2)
Audio mode control
Mini DIN control signals
Code rate
1/2, 2/3, 3/4, 5/6, 7/8
Auto. recognition (DVB-S)
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (DVB-S2)
Required Eb/N0
ETSI EN 300 421
(DVB-S)
EBU Teletext subtitling ETSI EN 300 472
ETSI EN 302 307
(DVB-S2)
DVB Subtitling
balanced
Subtitling
ETSI EN 300 743
ASI out
LNB Power
13/18 V
+1 V for line compensation
Impedance
75 Ohm
Standard
DVB-ASI
188/204 bytes
Current
500 mA
Tone frequency
22 kHz
± 20 %
Packet size
Tone amplitude
0.65 Vpp
± 250 mV
General
Common Interface
Power consumption
15 W
max. 20 W
Connector
PCMCIA
Supply voltages
+24/620 V/mA
without LNB and CAM
Standard
EN 50221
CA module
PC-Card type II
Dual slot with ejector
Connectors
Hot plug-in
Video decoder
RF in
F(f)
RF loop-throug
F(f)
ASI out
BNC(f)
Compatibility
MPEG-2 MP@ML
Video
BNC(f)
MPEG-4 AVC Main Profile (H.264)
Audio
Mini DIN 8 pins
Modes
HP/MP down conversion
10/100base-T
RJ-45
Frame conversion
16:9 Letterbox
DVX Backplane
EURO C/2 Male 3x16
VBI transcoding
ETSI EN 301 775
EMC compatibility
VBI data generator
WSS and PDC (PCS only)
Operating temperature -10 ...+55 °C
option
Audio decoder
Compatibility
ISO/IEC 11172-3, Layers I and II
ISO/IEC 13818-3, Layer II
ISO/IEC 14496-3, AAC
Modes
Stereo, Mono, Dual mono
AC3 downmixing
EN50083-2; EN55022 Class B
Specifications met +5...+45 °C
Dimensions
6U*7HP*170mm
Weight
1 kg
height*width*depth
option
option
www.teleste.com TELESTE CORPORATION P.O. Box 323, FI-20101 Turku, Finland Phone +358-2-2605 611, Fax +358-2-2446 928 (switchboard)
PDV125E v2.1 03/2008
Voltage