Download Shuttle X50V2 (Plus) Accessory: PCL68

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Immunity-aware programming wikipedia , lookup

Switched-mode power supply wikipedia , lookup

Voltage optimisation wikipedia , lookup

Mains electricity wikipedia , lookup

Opto-isolator wikipedia , lookup

Rectiverter wikipedia , lookup

Transcript
Product Specification
Shuttle Accessory
Accessory for the X50V2-series:
COM/LPT ports
PCL68
The Shuttle accessory PCL68 is compatible with the Shuttle All-in-OnePC X50V2 (Plus) series. It will upgrade the PC by addional legacy ports
and add two serial (COM) and one parallel (LPT) port to the back
panel.
Product name

Shuttle Accessory PCL68
External ports


2x Serial port (Sub-D, 9 pins, male)
1x Parallel port (Sub-D, 25 pins, female)

Both serial ports can provide a voltage
supply of either 5V or 12V (max. 1.1A)
for external devices






Printed Circuit Board (PCB)
3 screws
Ribbon cable
EMI core
Type label sticker
Multi-language quick installation guide
(EN, DE, FR)

Compatible with the Shuttle All-in-OnePC X50V2 and X50V2 Plus.
External power
Scope of
delivery
Compatibility
Scope of delivery (PCL68)
Product PCL68
Order No: POA-PCL68
Images for illustration purposes only.
Shuttle All-in-One PC X50V2 (Plus)
Shuttle X50V2 with the PCL68 accessory
Page 1 | 20 September
www.shuttle.com
Shu t tl e Computer Han dels GmbH
Fritz- Strassmann-S t r. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
[email protected]
©2009 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only.
Feature Highlight
Product Specification
Power over serial port
Both serial ports can provide a voltage
supply of either 5 or 12V (max. 1.1A) over
Pin 9 (Ring pin) of the D-Sub connector
depending of the jumper setting. This
voltage can be used to supply external
devices.
©2009 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only.
Jumper configuration
no jumper = 0V (default)
Pin 1-2 = 12V
Pin 2-3 = 5V
Page 2 | 20 September
www.shuttle.com
Shu t tl e Computer Han dels GmbH
Fritz- Strassmann-S t r. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
[email protected]