* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download CableTEC Corona Treatment of Cables Advantages:
Survey
Document related concepts
Industrial applications of nanotechnology wikipedia , lookup
Strengthening mechanisms of materials wikipedia , lookup
Self-assembled monolayer wikipedia , lookup
Nanogenerator wikipedia , lookup
Nanofluidic circuitry wikipedia , lookup
Low-energy electron diffraction wikipedia , lookup
Surface tension wikipedia , lookup
Tunable metamaterial wikipedia , lookup
Synthetic setae wikipedia , lookup
Sessile drop technique wikipedia , lookup
Ultrahydrophobicity wikipedia , lookup
Energy applications of nanotechnology wikipedia , lookup
Transcript
CableTEC Corona Treatment of Cables The purpose of surface treatment of polymer-based materials is to increase surface wettability through electrical discharge. The low surface energy of polymerbased substrates often leads to poor adhesion of inks, glues and coatings. To obtain optimum ad- hesion, it is necessary to increase the surface energy of the substrate to just above that of the material to be applied. Surface treatment with Corona results in improved surface adhesion properties. The CableTEC is a unique and costeffective method for optimising the adhesion properties of printing inks and coatings onto polymer cable insulations such as PE, PP, and PTFE. The in line treating system has been specifically designed by Tantec to facilitate easy installation to new or existing production lines. Advantages: A complete system includes; highfrequency generator, high voltage transformer, air cooled electrodes, ozone filter and customised stand alone or bench-top treating station. CableTEC conforms with CE regulations and is CE marked • 360° non contact treatment. • Treatment of standard cable diameters from 0.5 - 8mm (others on request). • Fully shielded treating station. • Zero speed control for automatic start/stop of treatment. • Integrated ‘watt-density’ control to ensure uniform treatment at changing line speeds. • High speed treatment up to 600m/min. (Depending on insulating material). • Available for treatment of “tough” materials such as Teflon and cross linked polymers. UK and Ireland Agent: Dyne Technology Ltd, Lichfield, Staffs, U.K. WS13 7FE Tel: +44 (0)1543 411460 www.dynetechnology.co.uk