Download scd 230 smart photocell

 SMART CITY DEVICES
SCD 230 SMART PHOTOCELL
SMART PHOTOCELL FEATURES

The SCD 230 Smart Photocell is an external wireless module that plugs in both standardized
3-pin and 7-Pin NEMA Twist Lock sockets (ANSI C136.10 and 136.41)

Enables remote control and monitoring at every light point, for all lamp technologies

With the onboard DIGI communications module, it provides a robust and secure full twoway mesh wireless communications network, between all compatible Smart City Devices and
the open Streetlight.Vision Central Management Software

Up to 70% total energy and maintenance savings

Functional features rich

Equipped with NFC interface, analog and digital inputs

New easy and low cost installation process

Leverage the street lighting networks to control and collect data from many Smart City
Devices such as sensors, advance meters, distributed automation elements and many others

Accurate energy and electrical parameters metering suitable for supporting utility billing

Automatic identification of all lamp failures and reduced onsite maintenance

Auto-photocell mode for continuous operation

Pole tilt sensor ready

Vertical light sensing window for the most accurate and reliable operation

Increased lighting quality and security

Modern enclosure design, minimizes the accumulation of dirt and facilitates device self-cleaning
FUNCTIONAL SPECIFICATIONS
 suitable for LED/HID streetlights
 powerful energy processor for accurate
luminaire measurement (energy, power, power
 supports both 3-pin and 7-pin NEMA twistlock sockets (ANSI C136.10 and C136.41)
 on/off control and stepless dimming
using 0-10V output interface
 connects to a secure mesh wireless




communications network
equipped with light sensor to enable autophotocell mode for continuous operation
digital input for motion-based dynamic
lighting, tilt sensor or other external sensor
analog voltage input for 0-10V sensor
connection
configurable unit system display
CONNECTED WITH






factor, voltage, current, power quality, ambient
light level, running hours…)
line or load side measurement
lighting error detection (day-burner, cycling
lamp, blocked relay, open circuit, lamp failure…)
photocell relay zero crossing switching for
longevity and reduced interference
easy onsite configuration and luminaire autotest and diagnose feature using NFC interface
and the mobile Streetlight.Vision app
future proof over-the-air firmware upgrades
blocked photocell window detection
READY FOR
PROVIDING THE BEST SMART CITY
SOLUTION IN THE MARKET
Integrating the proven DIGI wireless
networking technology and the de-facto
open standard Streetlight.Vision Central
Management Software (managing devices
in more than 500 cities worldwide), the
Enlight SCD 230 Smart Photocell enables
an easy and fast deployment of thousands
of individually managed light points on the
street lighting networks.
TECHNICAL SPECIFICATIONS
Operating Voltage
Power Consumption
Output Control
Digital Input
Analog Input
Metering


Voltage range 85–264VAC (90-305VAC on request)
Frequency range 47–63Hz

Average < 3W, Peak < 7W (as required by ANSI C136.48)



Switched internal relay for on/off control
15A rated load
1-10V dimming control


Max. 24VDC, 20mA
0-10VDC




Line or load side as an option
Range: 0–10000W, 0–630V, 0–17,5A
Accuracy: 1% / 0,5% (on request)
Metered parameters: Voltage, Current, Power, Frequency, Energy, Power Factor, Lamp Burning Hours,
Temperature, Ambient Light Level, Lamp Brightness Level
Power Quality Monitoring: Voltage Surges/Sags

Failures Identification
Safety
Environmental
Physical
DIGI Networking

Open Circuit, Blocked Relay, Lamp Failure, Day Burner, Overcurrent, Overvoltage, Overtemperature, Faulty
Photodiode, Blocked Photocell Window, Pole Tilt, Cycling Lamp, Lamp Power too High/Low, Lamp Current
too High/Low, Low Power Factor

IEC60950-1



Operating temperature range: -40 °C to +70 °C
Humidity: 5% to 95% RH, non-condensing
Storage Temperature: -40 °C to +85 °C



Weight: 200 g
IP rating: IP 66, when fitted
Dimensions: 79 x 84 mm (H x D)

Radio-Frequency:
o
o

Installation

868 MHz / 902 to 928 MHz / 2.4 GHz
Regulatory Approvals: FCC, IC (North America), ETSI (Europe), C-TICK (Australia),
TELEC (Japan), ANATEL (Brazil)
RF Communications:
o
Data Rate: from 250Kbps up tp 1Mbps mesh networking
o
Automatic data routing with self-configuration and auto-healing
o
Spreading Technique: FHSS (Frequency Hopping)/DSSS (Direct Sequence Spread Spectrum)
o
Transmitter Output: up to 250mW, software selectable
o
Receiver Sensitivity: -101dBm
o
Confidentiality: AES-128 bit encryption
SCD 230 Smart Photocell can be installed on the top of a lighting fixture by replacing the existing photocell.
It supports both 3-pin and 7-pin NEMA Twist-Lock sockets based on ANSI 136.10 and ANSI 136.41 standards
enlight-scd.com
Content subject to change without notice.
smarter outdoor lighting networks