Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
TIG-160P/200P Quick Specs Application: Metal Fabrication Maintenance and Repair Auto Body Light Industrial PROCESS: DC TIG MMA(Stick) Input Power: 230V, 1-Phase Amperage Range: 160P: 5-160A 200P: 5-200A Rated Out put at 25°C (104°F): 160P: 160A at 16.4V @60% Duty Cycle 200P: 200A at 18V @60% Duty Cycle Weight: 12 kg For TIG and Stick Welding Portable design, High quality, Great performance The TIG-160P/200P is a small but rugged, high-performance DC TIG and Stick welder designed for alloy fabrication, process piping, or critical maintenance work. Accurate and refined HF ignition and the necessary control, power and work capacity to reliably com- plete a variety of professional welding tasks. Weighing in at a portable 12 kg, the machine automatically connects to 230V service and features simple torch connections that provide for quick changeover from TIG to Stick welding. Specialist Features Precision Arc Performance: • Pulse control: Built in pulsing functions help minimize heat input on thin materials, and provide for a faster freezing weld puddle for uphill welding on curved surfaces such as process piping. The TIG pulse also helps moderate filler metal deposition for consistent bead appearance. • High-frequency TIG starting: Makes it easy to establish an arc under a variety of conditions. Enhances quality by minimizing the potential for weld contamination created by tungsten inclusions in the weld. • Refined arc ignition from 3A. • Hot Start Function reliably ignites the electrode and melts perfectly to ensure the best quality even at the start of the seam. • Arc Force makes it easier to weld large-drop melting electrode types at low current strengths with a short arc in particular. • Powerful with heavy duty power sources at maximum output current: 200A @60%. • Easy operation and full functions: from the control panel allowing fast adjustment of all necessary controls for DC Pulse TIG welding with either HF or contact ignition. • 4T Trigger Hold allows to hold the present current by user until press the trigger again. • Fast, precise, clean arc ignition and arc ending. • 10 channels memory capacity Outstanding Quality: • Newly designed using the latest power electronic technology for improved reliability. • CE Certified. • One-Year Warranty on parts. W E L D E R S Tel:(86)571-88231791 Email:[email protected] Http:www.everprowelders.com HANGZHOU TOPWELL TECHNOLOGY CO.,LTD. 1 Technical specifications Item No TIG-160P TIG-200P Rated Input Voltage Max. Load Power Capacity 1PH ~ 230V ±15% TIG: 4.10KVA MMA: 6.60KVA TIG: 160A/16.4V MMA: 160A/26.4V TIG: 140A/15.6V MMA: 140A/25.6V TIG: 5A/10.2V~160A/16.4V MMA: 20A/20.8V~160A/26.4V 70V~80V 0.8 80% 0.2Hz~200Hz 1%~100% 5A~200A 5A~200A 0.1S~15S 0.1S~15S 0.1S~15S 0.1S~15S 10A~160A 0.1~3S 10A~160A 410x185x310mm 12KG 1PH ~ 230V ±15% TIG: 5.63KVA MMA: 8.75KVA TIG: 200A/18V MMA: 200A/28V TIG: 160A/16.4V MMA: 160A/26.4V TIG: 5A/10.2V~200A/18V MMA: 20A/20.8V~200A/28V 70V~80V 0.8 80% 0.2Hz~200Hz 1%~100% 5A~200A 5A~200A 0.1S~15S 0.1S~15S 0.1S~15S 0.1S~15S 10A~160A 0.1~3S 10A~160A 410x185x310mm 12KG Rated Duty Cycle(25℃)60% 100% Welding Current/Voltage Range Open Circuit Voltage Power Factor Efficiency TIG Pulse Frequency Pulse Width (Ratio) Arc-starting Current Crater-filling Current Current Up-slope Time Current Down-slop Time Pre-Gas Time Flow-Gas Time MMA Arc Force Hot Start Time Hot Start Current Dimension (LxWxH) Weight (KG) General View of Control Panel Control Panel Parameter Values 1.Welding Process:TIG/MMA 2.Ammeter/Voltmeter Display 3.Encoder Control 4.Arc Ignition type:HF Impulse/LIFT Arc 5.Pulser Control TIG-200P TIG 1 Peak Current Base Current Pulse Frequency Pulse Width (Ratio) 3 MMA 2 5A~200A 5A~200A 0.2Hz~200Hz 1~100% 6.Mode:2T(STD)/4T(HOLD)/REMOTE 7.Sequencer Control HOT START GAS TEST 4 5 6 7 8 9 10 Arc-starting Current: 10A~160A Crater-filling Current: 5A~200A Current Up-slope Time: 0.1S~10S Current Down-slop Time:0.1S~15S 8.Pre-Gas Time:0.1S~10S Flow-Gas Time:0.1S~15S 9.ARC FORCE/HOT START 10.Gas test button: For setting the shielding gas quantity W E L D E R S Tel:(86)571-88231791 Email:[email protected] Http:www.everprowelders.com HANGZHOU TOPWELL TECHNOLOGY CO.,LTD. 2 PULSED TIG CONTROLS The Pulsed TIG function switches the amperage from a high(peak) to a low(background) at a set rate(PPS). Pulsing can reduce heat input by lowering the average amperage, increasing control of the weld puddle, penetration and distortion. The following parameters can be adjusted for desired results: High-Speed Pulse Low-Speed Pulse Focused arc increases travel speed and penetration Distinct ripple pattern Narrow bead and HAZ 1 to 10 pulses per second(PPS) will produce a distinct ripple pattern in the weld bead. Can be used to time filler addition, reduce distortion and improve control. 100 pulses per second(PPS) and higher helps to focus the arc for increased stability, penetration and travel speed. Increased puddle agitation improves weld microstructure. Arcforce correction (welding characteristics) Arcforce is a setting that allows you to adjust the arc to soft smooth arc to a more aggressive digging arc. Setting high is to bump up amperage when you have a really tight arc so that you keep welding. O.C.V. Arc Voltage (Volts) A A B B Welding Current (Amps) adjustable Arc force Control HOT START Hot Start adaptive control provides positive arc start without sticking. I a) b) a) = Hotstart time b) = Hotstart current I = Welding current t = Time t W E L D E R S Tel:(86)571-88231791 Email:[email protected] Http:www.everprowelders.com HANGZHOU TOPWELL TECHNOLOGY CO.,LTD. 3 Accessories For Standard accessories TIG torch: TIG-26 For Optional accessories Electrode holder and Earth clamp W E L D E R S Argon gas regular Foot Pedal Tel:(86)571-88231791 Email:[email protected] Http:www.everprowelders.com HANGZHOU TOPWELL TECHNOLOGY CO.,LTD. 5