Download TIG-160P 200P.cdr

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Document related concepts

Electron-beam welding wikipedia, lookup

Friction stir welding wikipedia, lookup

Oxy-fuel welding and cutting wikipedia, lookup

Welding wikipedia, lookup

Forge welding wikipedia, lookup

Sensors for arc welding wikipedia, lookup

Transcript
TIG-160P/200P
Quick
Specs
Application:
Metal Fabrication
Maintenance and Repair
Auto Body
Light Industrial
PROCESS:
DC TIG
MMA(Stick)
Input Power: 230V, 1-Phase
Amperage Range:
160P: 5-160A
200P: 5-200A
Rated Out put at 25°C (104°F):
160P: 160A at 16.4V @60% Duty Cycle
200P: 200A at 18V @60% Duty Cycle
Weight: 12 kg
For TIG and Stick Welding
Portable design, High quality, Great performance
The TIG-160P/200P is a small but rugged, high-performance DC TIG and Stick welder designed for alloy fabrication, process piping, or
critical maintenance work. Accurate and refined HF ignition and the necessary control, power and work capacity to reliably com- plete a variety
of professional welding tasks. Weighing in at a portable 12 kg, the machine automatically connects to 230V service and features simple
torch connections that provide for quick changeover from TIG to Stick welding.
Specialist Features
Precision Arc Performance:
• Pulse control:
Built in pulsing functions help minimize heat input on thin materials, and provide for a
faster freezing weld puddle for uphill welding on curved surfaces such as process
piping. The TIG pulse also helps moderate filler metal deposition for consistent bead
appearance.
• High-frequency TIG starting:
Makes it easy to establish an arc under a variety of conditions. Enhances quality by
minimizing the potential for weld contamination created by tungsten inclusions in the
weld.
• Refined arc ignition from 3A.
• Hot Start Function reliably ignites the electrode and melts perfectly to ensure the
best quality even at the start of the seam.
• Arc Force makes it easier to weld large-drop melting electrode types at low current
strengths with a short arc in particular.
• Powerful with heavy duty power sources at maximum output current: 200A
@60%.
• Easy operation and full functions: from the control panel allowing fast adjustment
of all necessary controls for DC Pulse TIG welding with either HF or contact ignition.
• 4T Trigger Hold allows to hold the present current by user until press the trigger
again.
• Fast, precise, clean arc ignition and arc ending.
• 10 channels memory capacity
Outstanding Quality:
• Newly designed using the latest power electronic technology for improved reliability.
• CE Certified.
• One-Year Warranty on parts.
W E L D E R S
Tel:(86)571-88231791 Email:[email protected] Http:www.everprowelders.com HANGZHOU TOPWELL TECHNOLOGY CO.,LTD.
1
Technical specifications
Item No
TIG-160P
TIG-200P
Rated Input Voltage
Max. Load Power Capacity
1PH ~ 230V ±15%
TIG: 4.10KVA
MMA: 6.60KVA
TIG: 160A/16.4V
MMA: 160A/26.4V
TIG: 140A/15.6V
MMA: 140A/25.6V
TIG: 5A/10.2V~160A/16.4V
MMA: 20A/20.8V~160A/26.4V
70V~80V
0.8
80%
0.2Hz~200Hz
1%~100%
5A~200A
5A~200A
0.1S~15S
0.1S~15S
0.1S~15S
0.1S~15S
10A~160A
0.1~3S
10A~160A
410x185x310mm
12KG
1PH ~ 230V ±15%
TIG: 5.63KVA
MMA: 8.75KVA
TIG: 200A/18V
MMA: 200A/28V
TIG: 160A/16.4V
MMA: 160A/26.4V
TIG: 5A/10.2V~200A/18V
MMA: 20A/20.8V~200A/28V
70V~80V
0.8
80%
0.2Hz~200Hz
1%~100%
5A~200A
5A~200A
0.1S~15S
0.1S~15S
0.1S~15S
0.1S~15S
10A~160A
0.1~3S
10A~160A
410x185x310mm
12KG
Rated Duty Cycle(25℃)60%
100%
Welding Current/Voltage Range
Open Circuit Voltage
Power Factor
Efficiency
TIG Pulse Frequency
Pulse Width (Ratio)
Arc-starting Current
Crater-filling Current
Current Up-slope Time
Current Down-slop Time
Pre-Gas Time
Flow-Gas Time
MMA Arc Force
Hot Start Time
Hot Start Current
Dimension (LxWxH)
Weight (KG)
General View of Control Panel
Control Panel Parameter Values
1.Welding Process:TIG/MMA
2.Ammeter/Voltmeter Display
3.Encoder Control
4.Arc Ignition type:HF Impulse/LIFT Arc
5.Pulser Control
TIG-200P
TIG
1
Peak Current
Base Current
Pulse Frequency
Pulse Width (Ratio)
3
MMA
2
5A~200A
5A~200A
0.2Hz~200Hz
1~100%
6.Mode:2T(STD)/4T(HOLD)/REMOTE
7.Sequencer Control
HOT START
GAS TEST
4
5
6
7
8
9
10
Arc-starting Current:
10A~160A
Crater-filling Current:
5A~200A
Current Up-slope Time: 0.1S~10S
Current Down-slop Time:0.1S~15S
8.Pre-Gas Time:0.1S~10S
Flow-Gas Time:0.1S~15S
9.ARC FORCE/HOT START
10.Gas test button:
For setting the shielding gas quantity
W E L D E R S
Tel:(86)571-88231791 Email:[email protected] Http:www.everprowelders.com HANGZHOU TOPWELL TECHNOLOGY CO.,LTD.
2
PULSED TIG CONTROLS
The Pulsed TIG function switches the amperage from a high(peak) to a low(background) at a set rate(PPS). Pulsing can reduce heat input by
lowering the average amperage, increasing control of the weld puddle, penetration and distortion. The following parameters can be adjusted for
desired results:
High-Speed Pulse
Low-Speed Pulse
Focused arc increases travel speed
and penetration
Distinct ripple pattern
Narrow bead and HAZ
1 to 10 pulses per second(PPS) will produce a distinct ripple
pattern in the weld bead. Can be used to time filler addition,
reduce distortion and improve control.
100 pulses per second(PPS) and higher helps to focus the arc for
increased stability, penetration and travel speed. Increased puddle
agitation improves weld microstructure.
Arcforce correction (welding characteristics)
Arcforce is a setting that allows you to adjust the arc to soft smooth arc to a more aggressive digging arc. Setting high is to bump up amperage
when you have a really tight arc so that you keep welding.
O.C.V.
Arc Voltage (Volts)
A
A
B
B
Welding Current (Amps)
adjustable Arc force Control
HOT START
Hot Start adaptive control provides positive arc start without sticking.
I
a)
b)
a) = Hotstart time
b) = Hotstart current
I = Welding current
t = Time
t
W E L D E R S
Tel:(86)571-88231791 Email:[email protected] Http:www.everprowelders.com HANGZHOU TOPWELL TECHNOLOGY CO.,LTD.
3
Accessories
For Standard accessories
TIG torch: TIG-26
For Optional accessories
Electrode holder and Earth clamp
W E L D E R S
Argon gas regular
Foot Pedal
Tel:(86)571-88231791 Email:[email protected] Http:www.everprowelders.com HANGZHOU TOPWELL TECHNOLOGY CO.,LTD.
5