Download Test products for power systems from Megger.

Test products for power systems
from Megger.
WWW.MEGGER.COM
The word ‘Megger’ is a registered trademark
For more than 100 years the Megger name has
been synonymous with high quality instruments
for the testing and measurement for electrical
power applications.
Contents
The trademark was first registered in May 1903
and is jealously guarded by the company.
Insulation testing
4
High voltage test equipment
5
Protection testing
6
Automatic protective relay testing
7
Page
Insulation resistance testing
2-3
Cable fault location equipment
8-9
Transformer testing
10-12
Transformer insulating oil testing
12
Watthour meter testing
13
Switches and test blocks
13
Battery testing
14-15
Earth resistance testing
16-17
Low resistance measurement
18-19
Power quality
20-21
Megger offer you a complete service
Although we’re best known for our world famous
range of insulation testers, Megger provides a full
service solution to meet your electrical test and
measurement needs.
With a constant flow of new products to assist the electrical engineer in
making the right measurements and exciting new software packages to help
monitor, analyse and report, Megger can also offer training to understand
and operate the instruments safely and effectively.
Our products provide testing solutions in the
most critical maintenance areas including cable
fault locating, protective relay testing, and power
quality testing, as well as being the supplier of
choice for hand-held electrical test and
measurement instruments for electrical
installation, data and telecom engineers.
Our training operation can be accessed globally using the web. Megger can
also offer training at your premises or at its centres in Dover, Dallas and Paris.
With such a diverse product offering, we are the
single source for electrical test and measuring
instruments.
In our 100 years Megger has built up a wealth of
expertise in our specialist fields. You can benefit
FREE from our expertise.
Megger has recently revised its publication
“a guide to diagnostic insulation testing over
1kV” as well as producing a selection of other
useful applications guides. These include “the
battery testing guide”, “fault finding solutions”
and “a guide to low resistance measurement”.
For your copy of any of these guides return the
card you will find on the inside back cover of
this catalogue.
For more information visit: www.avotraining.com
NEW
Megger PowerDB™
Power test data analysis and certification software
Designed to manage the complete suite of test data collected from power system assets. Test forms are designed for the
majority of the electrical apparatus on the market today. PowerDB currently supports the following devices:
Batteries
Generators
Loadbreak Switches
Switchboards
Cables
Ground Fault Tests
Motor Control Centers
Transducers
Circuit Breakers
Ground Mat/Grid Tests
Power Factor Tests
Transfer Switches
Watthour Meters
Coordination Data
Instrument Transformers
Power Transformers
Disconnects
Insulation Fluids
Relays
The software will perform extensive information processing including equation calculations, temperature correction factors
and charting. Data trending for predictive failure analysis is accomplished by charting historical results, stored in PowerDB or
imported from other party’s proprietary database software, for any piece of equipment.
Contents
1
Insulation resistance testing
Megger MIT520
NEW
5kV insulation resistance tester
Insulation resistance testing
Model
Display
Power supply
Test voltage
Measurements
Test types
Other features
Graphical
Analogue
Analogue/Digital
Mains power
Rechargeable
Hand-crank
Dry cell
10.0kV
5.0kV
2.5kV
1.0kV
500V
250V
25V steps 50V to 5kV
10V steps 50V to 1kV
25V steps 1kV to Max
test voltage
Max reading
Min reading
Voltage
Time constant
Capacitance
Leakage current
Polarisation index
Dielectric absorption ratio
Step voltage
Dielectric discharge
Timer control
Timer display
5mA test currents
3mA test currents
2mA test currents
1mA test currents
Guard terminal
USB output
RS232 output
RS232 control
Calibration Certificate
BM15
MJ15
✓
✓
optional
✓
optional
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
MIT510
MIT520
MIT1020
S1-5010
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
15TΩ
10kΩ
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
35TΩ
10kΩ
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
The MIT520 offers the ability to test insulation to 5kV.
It allows automatic IR, PI, DAR, SV and DD tests, and
results storage and download give full diagnostic
information.
The MIT520 can be powered using both mains or its
on-board rechargeable battery.
✓
20GΩ
100kΩ
✓
20GΩ
100kΩ
✓
15TΩ
10kΩ
✓
✓
✓
✓
5TΩ
10kΩ
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
MIT520
Megger MIT1020
NEW
10kV insulation resistance tester
✓
The MIT1020 offers the ability to test insulation to 10kV, to
✓
✓
comply with IEEE43: 2000. It allows automatic IR, PI, DAR,
SV and DD tests, and results storage and download give full
diagnostic information.
Megger BM15 and
Megger MJ15
The MIT1020 can be powered using both mains or its
on-board rechargeable battery.
MIT1020
Analogue dual supply
Easy-to-use 5kV insulation testers in a tough field case.
The MJ15 offers a unique combination of battery and
hand cranked generator to give the answer to “go / no go”
testing.
Megger MIT510
MJ15
Megger Series 1-5010
NEW
Diagnostic insulation tester
5kV insulation resistance tester
The Series1-5010 is a heavy-duty mains/battery powered
The MIT510 is an easy to operate insulation resistance tester
instrument. Offering auto test and results storage, it is a
that is very tough. It allows automatic IR. The built-in timer
stand-alone instrument for maximum diagnostic
and high test ranges allow simple and quick evaluation of
information and predictive maintenance.
S1-5010
the condition of the insulation under test. The MIT510 is
mains or battery powered.
MIT510
2
Insulation resistance testing
Insulation resistance testing
3
Insulation testing
High voltage test equipment
Capacitance and dissipation factor or tanδ testing
High voltage test equipment
Insulation testing
Model
Output voltage
Capacitance measuring range in µF
Dissipation factor
UST test
GST test
GST guarded test
Watts loss measurement
Current measurement
Range extension
Interference suppression
Balancing
Data storage
Bar code reader
PC software
RS232 printer output
Delta 2000
12kV
0-0.11 or
0-1 with inductor
0-90%
✓
✓
✓
✓
✓
✓
Automatic
Automatic
✓
✓
✓
✓
CB100
28V
0-1.2
670025
2.5kV
0-0.22
670065
12kV
0-0.22
0-30%
✓
✓
✓
✓
0-200%
✓
✓
✓
✓
✓
0-200%
✓
✓
✓
✓
✓
Manual
Manual
Manual
Manual
✓
Inherent
Manual
670070
12kV
0-0.22 or
0-1 with inductor
0-200%
✓
✓
✓
✓
✓
✓
Manual
Manual
Model
d.c. test sets
220005
220015
220070
220123
220164
a.c. test sets
230315
230415
230425
686100
681100
686100
681100
5kV
15kV
70kV
120kV
160kV
5kV
d.c. output
Continuous
Short circuit
5mA
5mA
2mA
5mA
3.5mA
5mA
2.5mA
5mA
2mA
5mA
–
Non-resonant
Resonant
Non-resonant
Resonant
17mA
a.c. output
Continuous
Short circuit
3kV
4kV
4kV
50/100kV
50/100kV
50/100kV
50/100kV
3mA
80/150mA
80/150mA
40/75mA
40/75mA
12mA
12mA
12.6mA
681100 series
50/100kV a.c. dielectric test sets
Delta 2000
681100 series a.c. dielectric test sets are a.c. high-voltage
12kV fully automated capacitance and tanδ
test bridge
includes a control/instrument cabinet, a high-voltage
sources for testing electrical insulation. The standard system
transformer assembly and all necessary cables including
ground and input power.
The ultimate instrument for dissipation factor testing, the
DELTA2000 offers automatic measurement of dissipation
factor, capacitance, watts loss and leakage current. It is
681100 series
ideal for the assessment of insulation in high voltage
apparatus such as transformers, bushings, circuit breakers,
cables, surge arresters and rotating machinery.
Delta 2000
220000 series
70kV, 120kV & 160kV d.c. dielectric test set
CB100
220000 series provides a dependable, safe, lightweight and
portable d.c. voltage source for testing the quality and
Low voltage capacitance and tanδ test bridge
integrity of electrical power cables, cable installations,
Lightweight and low-cost the CB100 is ideal for workshop
motors, switchgear, insulators, transformers and capacitors.
use. Manually balanced it offers direct readout of tanδ and
capacitance, overcoming interference by using a test
frequency of 80 or 100Hz.
CB100
670000 series
2.5 and 12kV semi-automatic capacitance
and tanδ test bridge
These instruments feature automatic balancing of
dissipation factor and manual balancing of capacitance and
interference suppression, allowing use in energised HV
substations. There is direct readout of tanδ, capacitance and
200070 series
watts dissipated.
670000 series
4
Insulation testing
High voltage test equipment
5
Protection testing
Automatic protective relay testing
Protection testing
Model
Output current
Voltage output
Power
Time
In Amps
Number of ranges
V a.c.
V d.c.
In VA
Period in S
Resolution in S
Cycles
CB832
0 - 1800
3
PCITS2000/2
0 - 2000
2
0 - 250
1750
0 - 999.99
0.001
0 - 99999
0 - 600
0.01
CB845
0 - 5000
4
7200
0 - 999.99
0.001
0 - 99999
MS2
0 - 240
DDA1600
0 - 19200
DDA3000
0 - 35000
DDA6000
0 - 50000
0 - 999.99
0.001
0 - 99999
0 - 99999
0.0001
0 - 99999
0 - 99999
0.0001
0 - 99999
0 - 99999
0.0001
0 - 99999
SCITS100
0 - 100
3
0 - 120
0 - 240
2400
0 - 599.99
0.01
SITS120
0 - 120
4
0 - 240
0 - 240
700
0 - 999.99
0.001
0 - 99999
SR90
0 - 140
5
0 - 600
0 - 500
1400
0 - 9999.99
0.0001
0 - 99999.9
SR98
0 -115
4
0 - 300
0 - 240
920
0 - 9999.99
0.0001
0 - 99999.9
Primary current injection testing (PCITS) and circuit breaker testing (CBT)
Protective relay test system
The MPRT tester and AVTS® software from Megger raises
the standard for the automatic testing and management
of protective relay systems. The MPRT offers traditional
manual and semi automatic testing of the relay system
whilst the AVTS package offers fully automatic testing as
well as relay maintenance schedule management.
Megger MPRT
Protective relay tester
PCITS2000/2
The power unit offers a range of new features including
constant and high power output capability through the
entire power curve, the combination of voltage and current
generators into one amplifier package giving the flexibility
of 4 current and 4 voltage outputs or 8 current outputs for
testing multi-phase differential relays, and built-in
transducer testing capability. The test set also offers 4
communication ports including facilities for high speed
downloads and upgrades via the internet.
Primary current injection test set
These tough self-contained test sets are designed for
operation by one person and are comparatively light. With a
separate hand-held controller connected by an expandable
cable it allows the operator to work close to a protective
relay while controlling a test.
DDA1600, DDA3000 and DDA6000
High current injection test sets
DDAs are a range of high current units capable of
generating a test current of up to 50000A through a circuit
breaker. The instrumentation and control system enable the
operator to vary the pulse time and firing angle of the
injected signal. They can be used for testing protection relays
and low voltage circuit breakers at the commissioning stage.
The touch-view interface makes it easier to perform
manual and semi-automatic relay testing. The large colour
LCD touch screen allows the operator to test virtually all
types of relays without the need for an external computer.
Menu screens and function buttons provide a quick and
easy method to drive the selected test.
PCITS2000/2
CB832 and CB845
DDA1600
Current injection sets
SCITS100 and SITS120
Automated relay testing enables the test engineer to save a
great deal of time and money by rapidly executing the test
process and minimising any protected power system
equipment down time.
Current and voltage injection sets
Circuit breaker and overload relay test set
The MS2 is capable of delivering 750A instantaneously. It is
ideal for over-current and earth fault relays and moulded
case circuit breakers.
6
Megger AVTS
A version of AVTS can be supplied to meet individual
customer’s requirements. AVTS Basic is supplied with all
MPRT systems but can be upgraded to AVTS Advanced or
the full AVTS Professional packages. AVTS Basic allows full
automatic operation of the test set with pre-prepared test
files, whilst the Advanced and Professional options give
increased functionality for the preparation of automatic test
files and relay performance evaluation.
Secondary current injection testing
MS2
AVTS test screens
Advanced visual test software
Capable of generating up to 1800A and 5000A respectively
for an instantaneous trip test, these units are ideal for
commissioning applications requiring high current injection.
The CB current injection sets offer adequate driving voltage
for all but the highest circuit impedance.
Tough test sets suitable for general purpose relay testing.
A wide range of relays can be tested due to their operating
system flexibility. Current and voltage on the output
terminals are measured and displayed. An accurate timer
measures the relay operating time. The SITS120 offers a
lighter option.
MPRT8430 protective relay
test set
SR98
SR90 and SR98
Voltage and current injection sets
The SR90 calibrates, performs acceptance testing and
troubleshoots the most popular solid-state and electromechanical relays. Tests all moulded case circuit breakers,
motor overload relays and timing circuit breakers. Manually
operated units work separately when testing simple relays
or interconnected to provide four simultaneous outputs
for more complex relays. The SR98 offers a lightweight,
field portable test set capable of testing a wide range of
electro-mechanical solid-state and microprocessor-based
protective relays.
AVTS packages have a powerful graphical interface that is
developed and continuously upgraded by Megger to
simplify fully automatic and complex relay testing. It is
designed to meet the existing and future needs of
protection technicians and engineers worldwide helping to
improve efficiency and reduce testing errors.
K500
Protective relay tool kit
A comprehensive range of relay tools containing over 40
specific items. The whole kit is supplied in either a
lightweight soft case or a tough lockable vinyl case.
Protection testing
Automatic protective relay testing
Relay type
Time delay
Impedance
Volts per hertz
Synchronising
Directional power
Loss of excitation
Negative sequence
over-current
Negative sequence
under-voltage
Instantaneous
over-current
Over-current
Moulded case breaker
Over-voltage
Directional over-current
Reclosing
Frequency
Differential
Tripping
Auto synchronising
Voltage controlled
over-current
Under / over voltage
d.c. under / over current
Motor overload
Ground directional
over-current
IEEE no.
2
21
24
25
32
40
SCITS100/2
✓
SITS120
✓
46
SR98
✓
✓
✓
✓
✓
MPRT
✓
✓
✓
✓
✓
✓
✓
✓
✓
47
50
51
52
59
67
79
81
87
94
25A
✓
✓
27 / 51
27 / 59
37 / 76
51 / 86
✓
✓
✓
✓
✓
67N
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓**
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
**Two units required
Automatic protective relay testing
AVTS is a registered trademark of Megger Group Limited and/or its subsidiaries.
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
7
Megger TDR1000/2
Cable fault location equipment
Single channel cable fault locator
A state of the art TDR capable of identifying and locating
faults on metallic cables. The TDR1000 is suitable for use
on both dead or live cables without a blocking filter, up to
CATIII 300 V phase-to-earth.
DART
Cable fault analysis system
The DART® cable fault analysis system is a
microprocessor controlled TDR designed to identify and
locate faults in power cables, using standard pulse echo,
arc reflection, differential arc reflection and impulse
current methods of prelocation.
The unit being menu driven is easy to use, and allows
operators to quickly identify and locate faults accurately
and effectively.
Megger TDR2000/2P
DART
TDR1000/2
Dual channel cable fault locator
A state of the art mono or colour display two-channel TDR.
capable of identifying and locating faults on metallic cables.
The TDR2000P is suitable for use on dead or live cables
without a blocking filter, up to CATIII 300 V phase-to-earth
with a range of up to 20 km. The TDR has an internal
memory and the TraceMaster software supplied allows
storage and analysis of waveforms on a PC.
PFL1000, PFL4000 and PFL5000
Power fault locator systems
A series of cost-effective mobile systems dedicated to
identifying, and finding faults in copper cables, accurately,
and efficiently.
Each model combines a d.c. test facility, proof/burn mode,
surge pulse (impulse current), arc reflection, and pulse echo
in a compact field portable module (dependent on model
ordered).
Outputs
d.c.
Burn
0 - 20kV
0 - 60mA
0 - 20kV
0 - 60mA
0 - 20kV
0 - 60mA
Model
PFL1000
PFL4000
PFL5000
Surge
0 - 16kV
0 - 16kV
0 - 16kV
Surge impulse
Energy
1536 J
1536 J
1536 J
L1050, L1070, L1071 Accutrace,
and Cable Route Tracer
12µF
12µF
12µF
Portable cable locators
Surge impulse generators
PFL4000
Surge generators are used to generate a flashover at the point of fault that can be detected
by an acoustic receiver; this is the preferred method to pinpoint faults in power copper cables.
■
■
Surge impulse generators
Model
651404
651017
651016
Suitcase
Portable
Dual-voltage
651028
653031
Standard
Heavy Duty
653031-32
Heavy Duty
These instruments are used to locate the exact route and
depth of metallic cables. The instruments capabilities are
enhanced by offering both passive and active modes. For
ease of use, and improved efficiency, the instruments can
be either inductive or conductively coupled.
■
Megger has a series of surge generators suitable for various cable rating.
Surge impulse
Output
Energy
0 - 15kV
300 joules, 2.5µF
0 - 15kV
536 joules, 5µF
0 - 7.5kV
450 joules, 4µF
0 - 15kV
450 joules, 16µF
0 - 25kV
1250 joules, 4µF
0 - 25kV
3750 joules, 12µF
0 - 30kV
5400 joules, 12µF
0 - 25kV
7500 joules, 24µF
0 - 30kV
10800 joules, 24µF
TDR2000/2P
■
H.V. output
d.c. test
0 - 25kV
0 - 25kV
0 - 25kV
0 - 30kV
0 - 65kV
0 - 65kV
0 - 65kV
0 - 65kV
Burn
0 - 30mA
0 - 30mA
0 - 30mA
0 - 50mA
0 - 100mA
0 - 100mA
0 - 100mA
0 - 100mA
■
Multiple output frequencies*
Variable tx output power level*
Peak & null detection*
Push button depth measurement*
(* dependent on model)
L1070
DETEX®
Voltage detectors and phasing testers
SD3000/2
The DETEX range of testers is ideal for determining the
presence of voltage be it phase to earth or phase to phase.
A verification unit is available to ensure safe operation.
Acoustic/Electromagnetic surge detector
The SD3000 is a dual standard acoustic/electromagnetic receiver used to pinpoint
the location of flashovers, generated at the point of fault by a surge generator.
By incorporating a second detector (Model SD3002) the direction and distance to
the fault is displayed.
Voltage detectors are suitable for voltages from 2.3kV to
550kV. Models available with electronic LED and audible
indication or neon indication.
Phasing testers are available from 2.4kV to 69kV with a
choice of analogue or neon voltage indication.
Earth fault locators BGFT and BGL
DETEX
See page 15
SD3000
8
Cable fault location equipment
DART is a registered trademark of Megger Group Limited and/or its subsidiaries.
Cable fault location equipment
DETEX is a registered trademark of Société Anonyme des Etablissements CATU.
9
Transformer testing
TTR550005
Single-phase transformer turns ratio test set
Windings
The single-phase TTR measures power and distribution
transformers using the manual balancing method. A hand
crank provides the power for the TTR550005.
Transformer testing
Model
Turns ratio range
Excitation voltage
Excitation current range
Operation
Power source
Weight
TTR550503
0.8 to 45,000
8V, 40V and 80V
0 to 500mA
Automatic
Mains
7.5kg
TTR100
0.8 to 20,000
8V
0 to 100mA
Automatic
Rechargeable batteries
1.5kg
TTR25
0.8 to 20,000
8V
0 to 100mA
Automatic
Batteries
1.5kg
TTR550005
0.001 to 129.999
8V
0 to 1A
Manual
Hand-cranked
7.3kg
Transformer ohmmeter
Transformer winding resistance and
tap-change test set
Field portable low resistance measuring instrument
designed to test transformer windings, motors,
generators and tap changers. The two independent
measuring channels greatly reduce the test duration
of large inductive loads like transmission transformers,
where it is possible to measure secondary and primary
windings simultaneously.
TTR550503
Three-phase transformer turns ratio test set
Measures three phases simultaneously, the turns ratio of
power, instrument and distribution transformers. With a
turns ratio range up to 45,000:1 and a 0.1% accuracy only
weighing 7.5kg, the TTR is ideal for testing complex threephase substation power transformers quickly and accurately,
minimizing the possibility of errors. The performance of the
TTR has been further enhanced by improved software
allowing improved reporting and remote control from a
PC or laptop.
Megger MCTT10
TTR550005
NEW
Current transformer tester
The MCTT10 test set is a portable unit for performing
saturation and ratio tests on current transformers using
the voltage-comparison method. It provides a variable
voltage output and precision instrumentation for testing
single and multi-ratio CTs. All tests, saturation and ratio –
can be performed without changing any leads. Current
transformers can be tested in their equipment
configuration, such as being mounted in transformers,
oil circuit breakers or switchgear. It is, however necessary
for the equipment to be totally isolated from the electrical
system prior to testing.
TTR550503
Megger TTR100
Hand-held transformer tester
Fully three-phase capable, the TTR100 is the low cost
solution for three-phase transformer testing. The lightest
and most portable TTR test set available, it offers a full set
of tests including; transformer turns ratio, excitation
current, phase angle deviation, winding resistance and
transformer polarity the results of which can be stored on
board for later downloading.
Polarity tester
Transformer ohmmeter
MCTT10
Transformer polarity verifier
Megger TTR25
TTR100
NEW
Hand-held TTR
The Megger TTR25 is an automatic hand-held transformer
ratio test set used to measure the turns ratio, excitation
current and polarity of windings distribution and power
transformers, potential and current transformers, and
tapped transformers.
This simple device can help avoid an expensive mistake.
Its small size and reliable construction make it a useful
addition to any tool box.
Phase sequence and continuity
indicator
Providing positive indication of phase sequence on
energized lines and which phase, if any, is faulty.
COMLink
Communications interface software
The COMLink program provides a communications interface
for transferring data from three phase TTRs and hand-held
TTR100s, as well as BITEs, and DARTs to a PC. It allows
remote control operation of Three Phase TTRs, and for all
instruments the viewing of test data, creation of test data
databases and printing out of test reports.
10
Transformer testing
TTR25
Motor and phase rotation tester
A compact, rugged and portable instrument suitable for
phase sequence and motor ratio testing. Suitable for
determining the rotation direction of 1, 2 or 3-phase
motors, rotation or sequence of energized power circuits.
Can also be used to determine the polarity of instruments
and power transformers, and phase/polarity of unmarked
motor windings.
Motor and phase rotation
tester
Transformer testing
11
Transformer insulating oil testing
Watthour meter testing
Moisture in oil testing
PHAZER®
Megger KF875
■
Watthour meter test system
Portable moisture in insulating oil test set
The PHAZER family of watthour meter test sets are true
Easy to use, portable one button test set with integral
printer. Can be powered from mains, internal
rechargeable battery or car battery. It is ideal for
on site use.
three-phase, fully automatic systems capable of testing
virtually all types of ANSI socket- mounted and bottomconnected single- and three-phase (three and four wire)
Megger KF-UNI
electricity meters.
Portable variable specific gravity moisture in
oil test set
The PHAZER family consists of specific models for testing
socket-mounted meters and specific models for testing
Easy to use test set that titrates for specific gravities
between 0.60 and 1.40. It is portable with integral printer.
Can be powered from mains, internal rechargeable battery
or car battery. It is ideal for on site use.
Megger KF-LAB
panel-mounted and bottom-connected meters. Offering
state of the art optical sensing and a built-in automatic
KF875
calibration routine.
NEW
Variable specific gravity moisture in oil test set
Easy to use test set that titrates for specific gravities
between 0.60 and 1.40. Designed specifically for laboratory
use the KF-LAB is mains powered only.
MA10
Dielectric strength testing
Portable watthour meter standards
KF-LAB
Megger OTSAF/2
PHAZER
The MA10 watthour standards are totally autoranging on
Auto testing series
the potential input, current input and auxiliary power input.
A series of fully featured laboratory instruments which have
world-wide test specifications pre-programmed for ease of
use. A custom test facility enables the operator to vary the
parameters of the tests. Variants offer maximum test
voltages of 60kV, 80kV and 100kV.
The three summing current inputs can be used to perform
closed link testing. Models with VARhour and Qhour
capabilities are available for testing multi-function solid
state meters.
Megger VCM100
Calibration meter
Verifies the calibration of all AF/2 laboratory models of oil
test sets.
Switches and test blocks
OTSAF/2
Megger OTS60PB
Portable automatic testing
STATES® switches
The smallest lightest fully automatic portable oil test set
available with test voltage up to 60kV. Internal rechargeable
battery for operation in remote locations. Optional printer
and fully programmed international test sequences.
Test switches
Covers the complete area of panel connections from
terminal block to knife switches. All products give long term
Megger OTS60SX
connection quality and mechanical stability.
Manual testing
Lightweight semi-automatic 60kV oil dielectric strength
test set which is simple to use and can be powered from
a range of mains supplies.
OTS60PB
Transformer insulating oil dielectric strength testing
Model
Test voltage
Function
Power supply
Weight
OTS100AF/2
100kV
Automatic
Mains
40kg
OTS80AF/2
80kV
Automatic
Mains
40kg
OTS60AF/2
60 kV
Automatic
Mains
40 kg
STATES switches
OTS60PB
60kV
Automatic
Rechargeable battery
19kg
OTS60SX
60kV
Semi-automatic
mains
17.5kg
■ For sale outside the EU only
12
Transformer testing
Watthour meter testing
PHAZER and STATES are registered trademarks of Megger Group Limited and/or its subsidiaries.
13
Battery testing
BITE2P
Impedance tester for up to 7000Ah cells
Routine impedance testing of batteries is fast and rigorous and insures against the cost of power breakdown.
A rugged durable instrument whose enhanced capabilities
make it easier to determine the true state of health of a
Battery testing
Model
For batteries of capacity
d.c. voltage range
d.c. voltage resolution
Impedance range
Impedance resolution
Weight
BITE3
2000Ah
0 - 30V
1mV
0 - 100mΩ
1µΩ
2.6kg
battery system, terminal plate to terminal plate.
BITE2P
7000 Ah
0 - 25V
1mV
0 - 100mΩ
1µΩ
14.5kg
The BITE2P is ideal battery systems up to 7000Ah, used in
substations, generating stations, telephone exchange UPS
systems and cabinetised UPS batteries, railway substations,
signal and communications installations.
BITE2P
Megger BITE® 3
NEW
Battery impedance test equipment
The Megger BITE3 battery impedance test equipment
BGFT
determines the health of lead-acid cells up to 2000Ah by
Battery ground fault tracer
taking measurements of the most important battery
parameters, cell impedance, an internal ohmic test, cell
Manually balanced instrument that identifies, tracks and
voltage, intercell connection resistance and ripple current.
locates ground faults in unearthed d.c. battery systems
For the first time in a battery test instrument, the BITE3
on-line. Effective in high electrical noise environments, as
measures float current and the harmonic content of the
the strength of test current can be adjusted. Useful for
ripple current. There is even a built-in spectrum analyser
industries where power supply for operating measurement,
to show the harmonic content of the ripple current. It has
communication and control equipment is critical.
firmware that can be upgraded through the Internet and
supports multiple languages.
BITE3
BGFT
BGL
PROACTIV
■
Battery earth fault trace
NEW
This instrument detects, tracks and locates earth faults
Battery database management software
on battery or floating systems by injecting a 21 or 25Hz
ProActiv is a powerful yet easy-to-use battery database
signal (depending on line frequency) between the system
management software designed to aid the analysis and
and earth. The resulting current is then traced through
monitoring of each individual battery in a battery system.
the system with a clamp accessory, knowing that the
Failure of a battery system within environments such as
fault current will flow to earth until the fault is located.
utilities, hospitals or manufacturing plants can result in
Designed for operation on live battery systems, hence
operational failure of the devices connected to it.
there is no requirement to isolate the system.
ProActiv assists the user to avoid battery failures, budget for
future battery string and cell replacements, and plan battery
BGL
PROACTIV test screens
change-outs in an orderly manner. It utilizes a standard
Microsoft® Access® database format allowing the user to
organize and manage battery data such as voltages,
impedance, intercell connection resistance, ripple current,
specific gravity, and IR thermographs.
■ For sale outside the EU only
14
Battery testing
BITE is a registered trademark of Megger Group Limited and/or its subsidiaries. Microsoft and Access are registered trademarks of the Microsoft Corporation and/or its subsidiaries.
Battery testing
15
Earth resistance testing
Megger DET3TD and DET3TA
NEW
Three and two terminal earth tester
Earth resistance testing
Model
Maximum earth resistance ranges
2 kΩ
20 kΩ
Resolution
DET2/2
DET3/2
DET5/4D
DET5/4R
✓
0.001 Ω
✓
0.01 Ω
✓
0.01 Ω
✓
✓
✓
✓
✓
✓
✓
±2%
✓
128
50
10, 1 or 0.1
20 V
10 kΩ
100 kΩ
Auto ranging
Two
Three
Four
Pole test
Current measurement and ART
Total service accuracy
Display
Test
Potential circuit rejection (pk-pk)
Max current loop resistance
Power source
Weather proof
Calibration certificate in the box
31⁄2 Digits
Frequency in Hz
Voltage
Current in mA
2 kΩ range
20 kΩ range
Rechargeable battery
Dry Cell battery
Hand-crank
IP54
±0.5%
✓
105 to 160
50
50
40 V
5 kΩ
>20 kΩ
✓
DET4TD
✓
DET3TC
✓
DET3TD
✓
DET3TA
✓
✓
0.01 Ω
0.01 Ω
0.01 Ω
0.01 Ω
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
2.5% of
scale
length
✓
✓
✓
±2%
✓
128
50
10, 1 or 0.1
40 V
4 kΩ
400 kΩ
±2%
✓
128
50
10, 1 or 0.1
40 V
4 kΩ
400 kΩ
✓
±2%
✓
128
25 or 50
0.45 or 4.5
40 V
100 kΩ
✓
±2%
✓
128
25 or 50
0.45 or 4.5
40 V
100 kΩ
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
±2%
±2%
✓
N/A
128
128
25 or 50
25 or 50
0.45 or 4.5 0.45 or 4.5
40 V
40 V
100 kΩ
100 kΩ
Ideal for small earthing systems, earth rods and lightning
conductors the DET3T gives you the choice of digital or
analogue displays, offering simple one button operation
with auto-ranging from 10mΩ to 2kΩ. Supplied complete
with test kit and carry case.
Megger DET3TC
NEW
Three and two terminal earth tester with
Attached Rod Technology (ART)
Offering all the benefits of the DET3TD but offering the
option of selective, no-disconnect testing and earth leakage
testing using a clamp. Supplied complete with test kit and
carry case (clamp optional).
All Megger earth testers are weather proofed to IP54
for field use.
Megger DET2/2
DET3TC
High resolution earth tester
Megger DCM300E
High resolution to 1mΩ. This level is required to measure
resistivity to adequate depth on many substation and
communication sites. Measurement of the low earth values
required on many installations, to meet Ground Potential
Rise (GPR) requirements also, requires this resolution to
ensure valid results. Superior noise filtering greater than 40V
peak to peak to retain resolution under real test conditions.
Earth leakage clamp
Measurement of leakage current. For stable readings down
to very low current value with a 10 mA resolution. Current
measurement up to 300A.
Megger DET10C and Megger
DET20C
DET2/2
Megger DET3/2
Hand-cranked earth tester
Earth resistance clamp testers
The DET3/2 gives complete independence from batteries or
mains power, with its hand-cranked generator. Checks for
excessive spike resistance or noise.
Megger DET5/4D and
Megger DET5/4R
DET3/2
Earth resistance clamp meters are suitable for measuring
earth resistance installations such as buildings, distribution
pole and RF transmitter sites and for inspection of lightning
protection systems. The DET20C offers memory and
downloading capability.
Four terminal earth tester
With standard resolution to 10mΩ the DET5/4 instruments
are used for medium sized earths and can also carry out
resistivity testing. Simplicity of operation through auto
ranging and auto-error detection.
Megger DET4TD
DET20C
Earth resistance testing
NEW
Model
Earth resistance ranges auto ranging
Alarm High
Low
Leakage current ranges
Four, three and two terminal earth tester
Simple to operate due to one button operation,
auto-ranging and auto-error detection, the DET4TD is
weatherproof and supplied complete with a lead and
stake kit.
16
Earth resistance testing
DET4TD
Auto ranging
Datalogging capacity
Data download
0.025Ω to 1550Ω
0 to 1550 ohms
0 to 1550 ohms
0.200 mA to 1.00 A
1.00 A to 35 A
DET10C
✓
✓
✓
✓
✓
✓
116 records
DET20C
✓
✓
✓
✓
✓
✓
8180 records
✓
Earth resistance testing
17
Low resistance measurement
Megger DLRO® 10
10A low resistance ohmmeter
Comprehensive range of low resistance ohmmeters suitable for all power and battery applications.
Low resistance measurement
Model
Measurement ranges
Resolution
Accuracy
Current test range
Results storage
RS232
Power source
DLRO600
DLRO200
0.1µΩ to 999.9mΩ
auto ranging
0.1µΩ to 999.9mΩ
auto ranging
Mains
Rechargeable battery
Weight excluding leads
0.1µΩ
<1%
10A - 600A
300
✓
✓
0.1µΩ
<1%
10A - 200A
300
✓
✓
14.5kg
14.5kg
DLRO10X
1.9999mΩ
19.999mΩ
199.99mΩ
1.9999Ω
DLRO10
1.9999mΩ
19.999mΩ
199.99mΩ
1.9999Ω
BT51
20.00mΩ
2000mΩ
19.999Ω
199.99Ω
1999.9Ω
0.1µΩ
±0.2%
0.1mA - 10A
700
✓
19.999Ω
199.99Ω
1999.9Ω
0.1µΩ
±0.2%
0.1mA - 10A
10µΩ
±1%
2.0A
✓
2.6kg
✓
2.6kg
✓
4.5kg
The DLRO10 offers a 0.1µΩ resolution with a maximum
capability of 2kΩ. Fast testing ability means users can
achieve results in less than 3 seconds. At only 2.5kg they are
the smallest, lightest and simplest-to-use 10A low resistance
ohmmeter available.
BT51
DLRO10
2A low resistance ohmmeter
Low resistance ohmmeter ideally suited for bond testing
applications, i.e. aircraft frames, electronic discharge and
fuel tanks. Four terminal method of measurement ranges
0-20.00mΩ and 0-2000mΩ. High test current of 2A.
Megger DLRO600
BT51
600A low resistance ohmmeter
Clips and leads for low resistance testing
Provides the operator with high resolution, 0.1µΩ,
lightweight and portable method of performing on-site low
resistance measurements. The unit can be used to test circuit
breaker contact resistance to IEC 62271-100, switch contacts,
busbars, joints, splices, fuses and rail bonds. The test current
is variable from 10A to 600A, in 1A steps, enabling the user
to perform all the required test with a single instrument.
Megger ohmmeters require test leads, two potential (voltage) and two current, to make low-resistance measurements.
In addition to individual current and potential (voltage) leads sets, duplex leads that combine current and potential
connections in one lead are offered. A variety of terminations, C-clamps, Kelvin clips, fixed point, and helical spring-point
leads are available.
Megger DLRO200
Battery testing
2 pieces
Termination
Hand spike
Maximum
test current
N/A
Single
2 pieces
Current clip
10A
Single
1 piece
Heavy duty C-clamps
10A
Current and potential
Current and potential
Current and potential
Current and potential
Current and potential
Current and potential
Current and potential
Current and potential
Duplex
Duplex
Duplex
Duplex
Duplex
Duplex
Duplex
Duplex
1 piece
1 piece
Lead set
Lead set
Lead set
Lead set
Lead set
Lead set
DH2 handspike with helical sprung contacts
DH3 handspike with helical sprung contacts
DH1 handspikes with helical sprung contacts
DH4 handspikes one with indicator light
DH5 handspikes one with indicator light
DH6 handspikes one with indicator light (600V)
1.3cm silver-plated Kelvin clip
4.0cm silver-plated Kelvin clip
10A
10A
10A
10A
10A
10A
10A
10A
Current and potential
Duplex
Lead set
Hand spikes with helical spring-loaded contacts
10A
Current and potential
Duplex
Lead set
10A
Current and potential
Duplex
Lead set
Helical hand spikes with spring points and
current push button switch
Heavy duty straight fixed contacts
10A
Current and potential
Duplex
Lead set
Heavy duty 5cm C-clamps
10A
Current and potential
Current and potential
Duplex
Duplex
Lead set
Lead set
Hand spikes with replaceable needle points
Heavy duty 10cm C-clamps
10A
100A
Current and potential
Current potential
Single
Duplex
Lead set
Lead set
Current potential
Duplex
Lead set
Current potential
Duplex
Lead set
Current potential
Duplex
Lead set
Current potential
Duplex
Lead set
Current potential
Duplex
Lead set
Heavy duty 10cm C-clamps
2 x current leads with 7.6cm clamps
2 potential leads with 2.5cm battery clips
2 x current leads with 4.5cm clamps
2 potential leads with 2.5cm battery clips
2 x 25mm2 current leads with clamps
2 potential leads with clips
2 x 50mm2 current leads with clamps
2 potential leads with clips
2 x 70mm2 current leads with clamps
2 potential leads with clips
2 x 95mm2 current leads with clamps
2 potential leads with clips
100A
100A
N/A
100A
N/A
600A
N/A
600A
N/A
600A
N/A
600A
N/A
For measurement of
Potential
DLRO600
Current
200A low resistance ohmmeter
Provides the operator with high resolution, 0.1µΩ,
lightweight and portable method of performing on-site low
resistance measurements. The test current is variable from
10A to 200A, in 1A steps, enabling the user to perform all
the required test with a single instrument. The unit can be
used to test small circuit breaker contact resistance to IEC
62271-100, switch contacts, busbars, joints, splices, fuses and
rail bonds.
DLRO200
Megger DLRO10X
10A low resistance ohmmeter with test
results downloading
The DLRO10X offers a 0.1µΩ resolution with a maximum
capability of 2kΩ. Fast testing ability means users can
achieve results in less than 3 seconds. At only 2.5kg it is the
smallest, lightest and most sophisticated 10A low resistance
ohmmeter available.
The DLRO10X has the capability of measuring inductive
loads such as transformers and motor winding. Availability
of readings can vary from a few seconds up to minutes
depending on the inductance and resistance of the test item.
The DLRO10X adds on-board memory, RS232 download
capability, maximum setting and manual or automatic range
control to the features of the DLRO10.
18
Lead type
Single
DLRO10X
Low resistance measurement
Length
2.0m
5.5m
9.0m
2.0m
5.5m
9.0m
5.0m
8.0m
6.0m
9.0m
2.5m
1.2m
2.5m
1.2m
2.0m
2.0m
5.5m
9.0m
2.0m
5.5m
9.0m
5.5m
Reference no
242021-7
242021-18
242021-30
242041-7
242041-18
242041-30
242144-16
242144-26
6111-023
6111-024
6111-022
6111-503
6111-517
6111-022
241005-7
242006-7
242006-18
242006-30
242011-7
242011-16
242011-30
242009-18
2.0m
5.5m
9.0m
2.0m
5.5m
9.0m
2.0m
5.0m
8.0m
5.0m
10.0m
10.0m
15.0m
15.0m
5.0m
5.0m
5.0m
5.0m
10.0m
10.0m
15.0m
15.0m
242002-7
242002-18
242002-30
242004-7
242004-18
242004-30
242003-7
242004-2-16
242004-2-26
242004-2-16
830255
830258
6220-787
6220-755
6220-756
6220-757
Low resistance measurement
DLRO is a registered trademark of Megger Group Limited and/or its subsidiaries.
19
Power quality
Megger DCM1000P and
DCM2000P
Megger PA9plus
Relay clampmeter
These advanced clampmeters are particularly suited to
protection testing, due to its power frequency and true
RMS measuring capabilities. For both single and three
phase systems. The DCM2000P also offers the functionality
of power meter, oscilloscope, harmonics meter and data
logger in one easy-to-use instrument.
Power quality analyser
The PA9plus has enhanced standard key features including
a fast digital signal processor to support future evolving
features and capabilities, a full 12MB of internal, nonvolatile memory and incorporated auxiliary power input
capabilities.
The product offers testing to the relevant standards
(EN50160, IEC61000 series, IEEE1159, IEEE519).
Data can be downloaded from the PA9 without interrupting
the capability of instrument to record events. The optional
removable memory capabilities allows internal recorded
data to be copied directly to an external standard compact
flash card using the same technology available with most of
today’s digital cameras. This means that without a computer
on site, data can be copied, manually or unattended, from
the instrument to external memory cards, increasing the
effective instrument memory storage to the size of the
memory card used, and will program new configuration
setups in the same, simple manner.
PMM1
DCM2000P
3 phase power measurement meter
Capable of measuring a.c. / d.c. voltage, a.c. primary and
secondary current, power, power factor, reactive power,
phase angle and frequency of single and three phase
electrical systems with extreme accuracy. Integral solid state
time suitable for continuity and voltage sensing and
harmonic measurement up to 49th harmonic. For detailed
waveform analysis a high-speed capture function allow 20
measurements per second. An RS232 data port allows
bi-directional communication.
PA9plus
PMM1
Megger MetReport
Power quality analysis software
MetReport is an extremely powerful, fully functional, and
stand-alone report generation tool for the Megger PA-9Plus
power quality analysers. Its primary purpose is to
dramatically improve and extend the reporting capabilities
of our complimentary software packages.
Model 8 Mark7
Analogue multimeter
Megger MetReport screens
The multimeter that has become the industry standard,
due to its robust construction.
In today’s economy, time is money. Power and power quality
professionals currently spend countless hours every year
creating customized reports supporting their analysis
studies. MetReport automates this tedious task while
improving the accuracy and reliability of the entire
reporting process.
MetReport utilizes data files obtained from the PA-9 and
PA-9Plus to rapidly produce completely customizable reports
targeted to your particular applications and requirements.
Some examples include: Power quality studies, harmonics
analysis, power factor and energy consultation, tolerance
curve studies (CBEMA/ITIC, SEMI F47, User Defined), auto
data analysis pass/fail reports, EN50160 compliance, and
IEEE/IEC Flicker. The key to quickly learning and using
MetReport is the integrated wizard function. This wizard
effortlessly takes you through the entire report creation,
customization, and generation process. Several sample
report templates are included for review, and may be
modified to meet your specific needs.
Model 8 Mark7
Title
Job title
All reports are output as standard Microsoft Word
documents.
Megger SLM8
Company
■
Address
8 channel recording volt-ammeter
The SLM8 is a low cost, 8 channel paperless recording voltammeter used for measuring and recording the true RMS
values of up to four voltage channels and four current
channels. It is the ideal investigative tool for utility
trouble-shooters, service investigation groups, meter
shop technicians and facility managers to identify and
document the presence of tree-phase and single-phase
voltage complaints utilizing associated load current
information to locate the source of problems.
20
Power Quality
Name
For more information on Megger products
fill in your details on this card and return it
to us in Dover.
Please send me the Megger Product
Catalogue on CD
Please send me more information on the
following
E-mail
Telephone
SLM8
■ For sale outside the EU only
Fax
Megger Pty Limited
Unit 26 9 Hudson Avenue
Castle Hill
SYDNEY NSW 2125
AUSTRALIA
T +61 (0)2 9659 2005
F +61 (0)2 9659 2201
E [email protected]
Megger
PO Box 15777
Kingdom of BAHRAIN
T +973 17 411311
F +973 17 413399
E [email protected]
T
T
F
E
www.megger.com
The products featured in this catalogue are available from:
Megger SARL
23 rue Eugène Henaff
ZA du Buisson de la Couldre
78190 TRAPPES
FRANCE
T +33 (0)1 30 16 08 90
F +33 (0)1 34 61 23 77
E [email protected]
Megger
PO Box 12052
Mumbai 400 053
INDIA
T +91 22 26315114
F +91 22 26328004
E [email protected]
Megger Limited
Archcliffe Road Dover
CT17 9EN
UK
T +44 (0) 1304 502100
F +44 (0) 1304 207342
E [email protected]
Product information, photographs and illustrations in this catalogue were current when
approved for print. In a continuing effort to offer innovative products, Megger Limited reserves
the right to change specifications, designs, models and prices without prior notice.
Megger is a Registered Trade Mark of Megger Limited.
T
T
F
E
Megger
4271 Bronze Way
Dallas, TX 75237-1019 USA
1 800 723 2861 (USA only)
+1 214 333 3201
+1 214 331 7399
[email protected]
Megger
Valley Forge Corporate Center
2621 Van Buren Avenue
Norristown PA 19403 USA
T 1 800 723 2861 (USA only)
E [email protected]
Archcliffe Road,
Dover,
CT17 9EN,
England
WWW.MEGGER.COM
Megger Limited
Copyright © 2005 Megger. Printed in the UK BP/12K/0805 2 Ed. Part No 21500-051
For comprehensive technical information on the entire Megger product range, visit:
Megger Limited
110 Milner Avenue Unit 1
Scarborough Ontario M1S 3R2
CANADA
1 800 297 9688 (Canada only)
+1 416 298 6770
+1 416 298 0848
[email protected]