Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Subsea Qualified 7-Port Ethernet Switch Model 922-FOM Focal Technologies Corporation, a Moog Inc. company, has over 30 years of expertise in supplying standard and custom marine products for harsh environments and is a leading manufacturer of high performance and high quality multiplexers. Contact Focal for any assistance in selecting the best solution for your requirements. Features Qualified, screened, and acceptance tested per ISO 13628-6 Hi-reliability, low power design with MTBF > 200,000 hours validated by accelerated life testing and field data from similar designs Redundant, pluggable optical transceivers with automatic fiber switchover Redundant Ethernet switches with managed switch functions including VLAN, QoS, priority, and port-based rate limiting Advanced diagnostics and modem configuration using Modbus TCP DHCP-configured IP address with static IP backup 3U Eurocard form-factor with options for front panels on console assemblies and heat-sinks on subsea assemblies Benefits The model 922 is a fiber-optic Ethernet switch with five copper Ethernet ports and two optical Ethernet ports, designed and extensively tested specifically for high-reliability subsea control and communication applications. A range of qualified pluggable fiber-optic transceivers allow users to customize the Model 922 for reliable Ethernet communication over fiber umbilicals up to 200 km long. Dual fiber-optic transceivers and on-board link monitoring allow for optical redundancy with built-in automatic fiber switchover, and the modular 3U Eurocard design allows for complete system redundancy using multiple cards installed in a custom subsea housing or in a 3U rack at the surface. Remote diagnostics and managed switch controls are accessible via any optical or copper Ethernet port using Modbus TCP protocol or an embedded webserver. The Model 922 is qualified to API 17F / ISO 13628-6 standards. Additional Environmental Stress Screening (ESS) is available. www.moog.com/focal Provides a proven modem solution optimized for subsea controls Supports customer configuration of modems using a range of qualified pluggable optical transceivers, including CWDM wavelengths and bidirectional (single fiber) versions Reduces costs by using standard base configurations Applications Subsea Controls - long fiber-optic links to Subsea Electronics Modules (SEMs) and other subsea distribution nodes Specifications Ethernet Ports (SIIS Level 3) Electrical Copper Ports 5 total; 4 on back plane, 1 on front panel Power Voltage +20 to +28 VDC, regulated Data Rates 10/100 Base-T(X) Power Current 0.2 A (0.4 A max.) Switch Control and Status Link/speed/duplex, flow control, QoS, VLAN, port mirroring, MIB counters Power Used 5 W typical (10 W max.) Protection ESD, EMI, over-voltage, reverse voltage, overcurrent (no fuses) Optical 1 Optical Ports 2 (can be configured as redundant or independent links) Optical Fibers Data Rates Wavelength Optical LC 2 per SFP (1 per SFP optional) Backplane 96-pin DIN41612 100 Base-FX (125 MBaud) Front Panel 9-pin Micro D 1310 and 1550 nm standard Options 37-pin Micro D (replaces DIN41612) (CWDM optional, 1471-1611 nm) Flux Budget 16-45 dB, depending on SFP installed Range 10-200 km, depending on SFP installed Options Bidirectional (single-fiber) transceivers Mechanical Dimensions 3U Eurocard, 160 mm x 100 mm x 4 HP Mounting Eurocard 3U rack or 4 x M3 hardware Options Front panel, heat-sink assembly Diagnostics and Control IP Address 1 per card, assigned by DHCP or static Accessibility Over any optical or copper Ethernet port using Telnet terminal, Modbus TCP, or web browser (IE, Firefox, Etc.) Parameters Tx/Rx power, optical/copper Link, temp, current, voltages, switch registers etc. 1 Connectors Life Cycle MTBF > 200,000 hrs @ +40 °C Median Life > 20 years @ +40°C Testing Q1 Qualification Tests, Factory Acceptance Tests, Accelerated Life Tests, Environmental Stress Screening (Optional) Environmental Temperature -18 °C to +70 °C (operation) -40 °C to +85 °C (storage) Humidity Max 85 % RH, non-condensing Vibration 5 g, per ISO13628-6 Shock 30 g, per ISO 13628-6 See Subsea Qualified SFP Modules datasheet for available optical transceivers. All specifications and information are subject to change without notice. Please contact Focal for the latest updates. © 2017 Moog Inc. DS922FOM-v2.1 www.moog.com/focal Focal Technologies Corporation, A Moog Inc. Company