Download specification for amano axp 200 access control system

Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
SPECIFICATION FOR AMANO AXP 200 ACCESS CONTROL SYSTEM
1.
SCOPE
The access control system shall be a completely integrated security solution providing
controlled access to the facility at specified locations through the use of high security
proximity technology. The system shall provide distributed supervised inputs and
outputs to allow for alarms to be detected and triggered. These inputs and outputs
shall be configurable via software to control building functions such as power control.
The system control panels will be fully upgradeable using flash memory firmware
upgrades to be compatible with an enterprise-networked system.
2.
SYSTEM ARCHITECTURE
The access control and alarm monitoring system shall be a flexible single-user, openarchitecture facility management system. The system shall be designed using reliable
state-of-the-art technology allowing for easy and economical expansion. The
scaleable design shall allow for operation from a single PC or through a software
upgrade accommodate multiple users in Local Area Network (LAN) or Wide Area
Network (WAN) configurations.
The system shall feature a powerful software embedded scheduler (Engine) that
intelligently controls the reader network to provide automated data collection and
configuration updates, facilitating seamless operation from controllers. All control
panels shall utilize off-line distributed processing concepts including inter-controller
communication if upgraded.
The distributed processing and inter-controller
communication shall include the ability to download system parameters to any field
panel thus allowing the field panel to provide full operating functions independent of
any connection to the host server PC. These field panels shall have the ability to
communicate between themselves without server intervention. This will allow for
functions such as anti-pass back control for zones incorporating multiple controllers.
The system shall support the open-architecture SQL compliant Interbase/Firebird
client/server database. The software shall run on Windows 98/NT/2000/XP and be
written in Java programming language thus allowing it to be operating system
independent.
Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
3.
SYSTEM SOFTWARE
The software suite shall comprise various integrated software modules that allow for
the full integration and retrieval of transactions from the hardware, as well as alarm
monitoring, reporting, and scheduling capabilities. The software modules shall allow
editing of personnel, access levels, system configuration and reporting to be
controlled by a password protected user interface. System operation for individual
operators shall be possible using assigned passwords only.
The software shall include a web server module for web based reporting. Additional
3rd party server support shall be available in the form of database connections.
The Access Control software shall cater for access control, elevator control, and alarm
monitoring and visitor management. It shall be capable of acting as a backbone for
Asset Management, Job Costing, Time and Attendance, Canteen Management,
Vehicle Tracking through gates or control points, Building Management and many
more.
The user shall have the ability to perform hardware configuration changes during or
after the installation which shall include functions such as door open time, door
contact time, location and reader names, and tagholder access rights configuration.
The system software shall support configuration of alarms triggering the system.
The system shall incorporate scheduled events activated by either time or a specific
programmed event, therefore being time or event triggered. Events such as message
display relay action must be supported.
Access control functions shall include validation based on time of day, day of week,
holiday scheduling, and access validation based on positive verification of card, card
+ PIN (Personal Identification Number), card + PIN + reason code (preprogrammed
reason for entry), special preprogrammed PIN configuration for use by personnel such
as USPS.
Comprehensive reports shall be printed out on request under a number of different
headings. Custom reports shall be available using the built-in report wizard or SQL
interface to the Database through any other report writer software.
3.1
Software Related Features
3.1.1
The Access Control Software shall be fully 32 bit enabled, shall run on
Windows 98/NT or 2000/XP and be written using Java programming
language thus giving it the ability to be operating system independent.
3.1.2
The software shall support Interbase/Firebird client/server databases.
Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
3.1.3
The Database shall support 3rd party integration e.g. Time and Attendance,
human resources software such as SAP, BAAN and Oracle etc.
3.1.4
Database tables shall be in 3rd Normal Form, allowing multiple cards to be
assigned to a single person. Therefore one employee master record with
multiple tag records associated to the master record.
3.1.5
Sites can be conveniently configured with efficient utilization of access
control units.
3.1.6
Comprehensive visitor support shall include, tracking of visitors, visitors
stored in master table, so that permanent records of visitors are available. This
feature must allow for the creation of visitor tags with their own specific
access rights.
3.1.7
An embedded alarm module shall allow continuous monitoring and reporting
of alarms. Using a graphical representation, which include building floor plans
by layer. Therefore featuring an active alarm to call the exact floor plan and
location screen in order to locate the alarm location very quickly and
efficiently.
3.1.8
On-line transaction viewer shall allow security to view transaction as they
occur.
3.1.9
The system shall support siren and event times.
3.1.10 Zone occupancy, visitor, and limited time calculation reports shall be
available. These should also be available through a standard web browser such
as Netscape or Internet Explore. No addition special software must be
required in order to use the Web Reports feature.
3.1.11 Multiple freeform data field 254 characters shall be used to capture any
additional user data.
3.1.12 A special data field shall provide for the recording of an image of the
cardholder or visitor these images must be stored in the main database file.
The images must not be stored in a separate directory and linked to the
database via a database link.
3.1.13 The system shall support all printers supported by Windows 98/NT/2000XP.
3.1.14 Any queries against the database shall not impact on the performance of the
readers. Therefore multiple seamless database queries will not affect actual
hardware performance speed.
3.2
Zone-related Software Features
Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
3.2.1
Supervisor tag unlock
3.3
Tag (Card)-related Software Features
3.3.1
Time-limited access
3.3.2
PIN codes
3.3.3
Reason codes
3.3.4
Suspension of tags
3.3.5
Multiple tag access
3.3.6
Tag access groups
3.3.7
Time patterns (schedules)
3.3.8
Anti-pass back (APB) control
3.3.9
Web based Reporting
3.3.10 Tagholder image capture
3.4
Visitor-related Software Features
3.4.1
Visitor image capture
3.4.2
Comprehensive visitor reporting
3.4.3
Access levels
3.5
Database-related Features
3.5.1
The database shall be of a true Relational Database Management System
(RDBMS) nature
3.5.2
The database shall support full transaction integrity, i.e. begin, commit and
rollback transactions
3.5.3
The database shall support full backup and recovery procedures
3.5.4
Views shall be supported to allow 3rd party software suites access to data
3.5.5
The database shall support the set up of stored procedures and triggers to
carryout processes automatically or at required intervals
3.5.6
The database shall support views to simplify reporting, allowing client to
access custom reporting functions
Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
3.5.7
The database shall be upgradeable to operate on Linux or Unix
3.5.8
The database shall be Internet ready
3.6
PC Hardware Requirements
The minimum requirements for any PC used with the access control software shall be
as follows:
CPU:
Memory:
Peripherals:
Communications:
Hard Drive:
Monitor:
4.
Pentium IV 1.0 GHz.
1 GB RAM.
CDROM drive.
RS232 ports, USB
6 GB (dependant on expected Database size)
Resolution 800 x 600, 65K colors minimum.
HARDWARE
The quantities of components shall be determined and installed by the contractor
based on the requirement to provide a fully operational integrated access control
system as per the intent of the specification.
Communication between components i.e. controller and host PC, and controller and
terminals, shall be via shielded twisted pair high quality data cable.
All terminals and controllers must allow for direct Firmware upgrade from the RS485
network connection. The units must be upgradeable during normal system operation,
therefore should one unit be in upgrade mode all other units will continue to operate
normally. The Firmware shall be stored in FLASH memory on the individual units.
Each unit in the system will contain a unique Factory ID (fixed address) in
hexadecimal code. This number shall be unique to each individual product and be
substituted with a system logical address for easy system configuration and
installation. The unit product address may not be configurable via rotary or on-board
dipswitches; all settings must be software configured via the system protocol.
4.1
System Controller
The system controller shall be the Amano IC controller. Each controller shall be
linked to a maximum of 48 terminals or 16 access locations. The controllers shall
support offline operation and each controller shall have the ability to increase tag
capacity by software and firmware upgrade. The standard controller configuration
shall support 8000-buffered transactions and a database of 2,000 users.
Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
4.2
Terminals and Readers
The terminals and readers supported by the controller shall be any combination of the
following:
I16 Input Terminal
Provides 16 fully supervised digital inputs to the
system. The terminal must facilitate direct RS 485
communications back to its associated controller for
easy of installation enabling the terminal to be
located as close as possible to the associated Input
locations. The terminal must be housed in a
convenient aluminum dust proof enclosure
O16 Output Terminal
Provides 16 Form C relay outputs. The terminal
must facilitate direct RS 485 communications back
to its associated controller for ease of installation
enabling the terminal to be located as close as
possible to the associated output locations. The
terminal must be housed in a convenient aluminum
dust proof enclosure.
Twin Remote Terminal (TRT)
The Amano (TRT) is a reader interface module will
accept multiple reader formats such as Wiegand
outputs, Barcode 39 with and without checksum,
Magstripe ABA, Amano Mifare Remote Readers,
Amano RF 4-channel UHF, Amano IR infrared
receiver; in the AXP200, 300 and 400 Access
Control Systems.
The Amano TRT is designed to provide access
control to one door in full anti-pass back mode, or
relaxed anti-pass back mode. The Amano TRT
utilizes two 3rd party reader ports, two Form C
relays and four supervised digital inputs to provide
full control of any access application. The terminal
must facilitate direct RS 485 communications back
to its associated controller for ease of installation
enabling the terminal to be located close the
associated access location or no more than a
distance of 500ft when using Wiegand protocol
Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
readers. The terminal must be housed in a
convenient aluminum dust proof enclosure.
The unit must provide the following features:
(a) Connection to 3rd party readers.
(b) All wire terminations use shall use plug in
Phoenix connectors to terminate on the TT board.
(d) Status indicators:
• The Amano TRT Terminal provides several
diagnostic status indicators for installers.
• The Amano Mifare Remote Readers each include
a single bi-colored red/green LED, the use of which
is configurable from the software (e.g. AXP200 or
AXP300/400) via the communications protocol.
(f) An external RS485 terminal communications bus
interface.
(g) Two independent SPDT relay outputs.
(h) Four dry contact fully supervised digital inputs.
(i) Operation from power inputs in the range 10 V to
30 V DC.
(j) Software utility to upgrade firmware while
installed on-site, without removal of the unit.
(k) The unit supports full Anti-pass back (APB).
Twin Terminal (TT)
The Amano (TT) is a tag read/write Terminal
designed for use in conjunction with Antenna
readers within AXP200, 300 and 400 Access
Control Systems.
The Amano TT is designed to provide access
control to one door in full anti-pass back mode, or
relaxed anti-pass back mode. The Amano TT
utilizes two Antenna Readers, two Form C relays
and four supervised digital inputs to provide full
control of any access application. The terminal must
facilitate direct RS 485 communications back to its
associated controller for ease of installation
enabling the terminal to be located as close as
possible to the associated access location. The
Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
terminal must be housed in a convenient aluminum
dust proof enclosure.
The unit must provide the following features:
(a) Connection to two Antenna Readers.
(b) All wire terminations use shall use plug in
Phoenix connectors to terminate on the TT board.
(c) Read-only function using the following tags:
Slim tags, Omega tags, and HID tags.
(d) Read/Write function using the following tags:
WriTag2048, Writag128.
(e) Status indicators:
• The Amano TT Terminal provides several
diagnostic status indicators for installers.
• The Amano TT Antenna Readers each include a
single bi-colored red/green LED, the use of which is
configurable from the software (e.g. AXP200 or
AXP300/400) via the communications protocol.
(f) An external RS485 terminal communications bus
interface.
(g) Two independent SPDT relay outputs.
(h) Four dry contact digital inputs.
(i) Operation from power inputs in the range 10 V to
30 V DC.
(j) Software utility to upgrade firmware while
installed on-site, without removal of the unit.
(k) The unit supports full Anti-pass back (APB).
MMA Mullion Micro Antenna
Provides for tag proximity tag read operations in
conjunction with its associated TT twin terminal.
The reader shall be fully sealed and potted
electronics for use outdoors. The slim mullion
design allows for exact fit to aluminum door frame
or other mullion style door frames. The unit must be
able to communicate with the proximity tags at a
distance or 3 – 5” dependant on tag size used.
Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
KMA Keypad Mullion Antenna
Provides for tag proximity tag read operations in
conjunction with its associated Twin Terminal (TT).
The Antenna Reader must incorporate a single tone
Buzzer with adjustable volume to any one of these
four levels (off, low, medium and high). The
Antenna Reader incorporates a single bi-colored
red/green Status LED.
The KMA must have a 12-button numeric keypad
for Personal Access Code (PAC), PIN-Code or
Reason Code entry. An extra button offers a door
bell facility. All functions configurable via system
software. The unit must be able to communicate
with the proximity tags at a distance or 3 – 5”
dependant on tag size used.
The Antenna Readers shall be housed in a black
ABS plastic enclosure, fully sealed and potted
electronics for use both indoor and protected
outdoor applications. The slim mullion design
allows for exact fit to aluminum door frame or other
mullion style door frames.
MA Micro Antenna
Provides for tag proximity tag read operations in
conjunction with its associated TT twin terminal.
The reader shall be fully sealed and potted
electronics for use outdoors. Multi-volume
(configurable) buzzer. All functions configurable
via system software
KA Keypad Antenna
Provides for tag proximity tag read operations in
conjunction with its associated TT twin terminal.
The reader shall be fully sealed and potted
electronics for use outdoors. It must include a built
in backlight keypad for use with system
programmed functions such as PIN (Personal
Identification Number) or reason code. Multi-
Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
volume (configurable) buzzer.
configurable via system software
All
functions
MHA Metal Harsh-Environment Antenna
Provides for tag proximity tag read operations in
conjunction with its associated TT twin terminal.
The reader shall be fully sealed and potted
electronics for use outdoors. The unit must be
manufactured out of a die-cast metal alloy. The unit
must be able to communicate with the proximity
tags at a distance or 3 – 5” dependant on tag size
used. Multi-volume (configurable) buzzer. All
functions configurable via system software
KHA Metal Keypand Harsh-Environment Antenna
Provides for tag proximity tag read operations in
conjunction with its associated TT twin terminal.
The reader shall be fully sealed and potted
electronics for use outdoors. It must include a built
in metal keypad for use with system-programmed
functions such as PIN (Personal Identification
Number) or reason code. The unit must be
manufactured out of a die-cast metal alloy. The unit
must be able to communicate with the proximity
tags at a distance or 3 – 5” dependant on tag size
used. Multi Tone (configurable) buzzer. All
functions configurable via system software
4.3
Cards/Tags
The following proximity cards shall be supported by the access control system:
Semi Slim Credit Card
Robust industry standard “clamshell” size and userfriendly card, can incorporate a photograph and
identity detail of the user bonded directly to the card
by means of a clear lens. Inductively powered requires no internal battery or other power
Amano Cincinnati, Inc.
Security Systems Division
1177 Main Street, Suite A
Dunedin, FL 34698
Phone (727) 733-7061
Tollfree (800) 390-5837
Fax (727) 736-1031
http://www.amano.com
connection. Card codes pre-set, 94 billion unique
numbers, Manchester encoded. Size 82mm x 52mm
x 4mm. Standard Credit Card size. Lifetime
guarantee.
ISO Credit Card
Robust industry standard ISO credit card size,
suitably finished to be printed by PVC card type
printer, can incorporate a photograph and identity
detail of the user printed directly on the card on
both sides. Inductively powered - requires no
internal battery or other power connection. Cards
codes pre-set, 94 billion discreet numbers. Size
82mm x 52mm. Standard ID Card size. Cards can
be personalized without any additional pouches.
Three-year guarantee
Keyfob Tag
Robust and almost indestructible, can be easily and
conveniently incorporated into personal items such
as a key-ring. Inductively powered - requires no
internal battery or other power connection. Cards
codes pre-set, 94 billion discreet numbers. With
options to facilitate 128 or 1408 bits of user
programmable memory. Size 36mm x 4mm.
Lifetime guarantee.
Amano Credit Card WriTag
Robust industry standard ISO credit card size,
suitably finished to be printed by PVC card type
printer, can incorporate a photograph and identity
detail of the user, bonded directly to the card.
Inductively powered - requires no internal battery or
other power connection. Read / Write Card 2048 Bit
/ 128 Bit. Cards codes pre-set, 94 billion discreet
numbers. Size 82mm x 52mm. Standard ID Card
size. Cards can be personalized without any
additional pouches etc. Three-year guarantee
Selected 3rd Party Cards
Industry standard HID 125Khz cards of any bit
format shall be supported only on Amano Antenna
Readers that are connected to the Amano Twin
Terminal.