Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Non-contact inductive card door ban Make Use Say Next Book New enhancements (mother Kajia Ka delete cards, auto registration, anti-probing open, multi-card the same number) I. Introduction: The non-contact proximity card access controller access control system is one of modern art. It uses the latest central processing unit (CPU) and the latest integrated circuit technology, all the data will not be lost due to power; powerful, with proximity card to open the door, proximity card and password, the password to open the door to open the door three kinds of ways; Sensors and other sound card with password security measures allow users more secure; open button, closing reminders, doorbell, which can be accessed normally open or normally atresia and other powerful features allow users more convenient. This product provides a secure way to automatically export controls is a business organization, offices, factories, residential, residential and other places ideal devices. Second, the technical parameters: Item Indicators A DC Power Supply: Voltage 12V ± 10% Current <0.1A 3 Dimensions 116mm × 116mm × 20mm 4 Weight 130g 5 Ambient temperature 0 ℃ -60 ℃ 6 relative humidity 20% -80% 7 Storage capacity 1000 user cards or PINs (expandable 8000 users), 8 reader from 5-15CM 9 Card Type EM or EM compatible card Third, the working status: Red Green events Normal state flash does not light Read valid card flashes Compiled into an effective stop does not shine 1/4 Enter a valid password flashes Incorrect operation beep sound for fast flashing Fourth, set up and use: An initial password: Programming password is 990101. 2, enter the programming mode: Press * password # to enter programming mode programming. Press ** to exit programming mode. Note: Operation arbitrary function must exit compiled. 3, increase card function settings: (3) increase the management card: Press * # 14 # programming code reading increase master card # Press * # 24 # Reading programming code to delete master card # Note: by setting a good management Kajia Ka first brush painted user card management card or delete user card (4) Fast carboplatin: Press * # 15 # continuous programming code reader # If the reader stop 10 seconds to exit automatically compiled state. (5) Number Gaca: Press * # 12 # programming code reader 3 No. Proof: easy to remember, if a card is issued to use room 888 (No. 888) corresponding room number easy to record, a self-number can be used more than one card, ID card, please add a row after pressing the three numbers, press # Read next one. (6) Card Gaca: Press * # 16 # programming password input card of the top ten after eight card # if: 0088888888 Enter 88888888 can. (7) ribbon Password Card: Press * # 11 # programming code reader input 4-8 digit password # (8) increased open Password: Press * # 13 # programming password enter a 4-8 digit password # 4, remove the card feature set: (1) Remove the card reader: Press * # 17 # programming code reader 2/4 (2) the card number deleted from the card: Press * # 18 # programming password after eight Card # (3) Number Delete Card: Press * # 19 # three programming code ID # Note: the corresponding numbered more cards deleted. (4) Remove Personal Password: Press * # 22 # to open the door programming password password # (5) remove all door Password: Press * # 23 # specify programmed password: the password to open the door to all deleted. 5, to restore the factory settings: (1) Press * # 86 # programming password command to restore all the factory after input parameters and delete all data (restore encrypted 990101) (2) Press the RESET button at the back of the machine under an encryption 990,101 + # Restore does not delete the key card and password, press 5 Next + # delete all data recovery recover encrypted 990,101. (3) modify the encryption: Press * # 88 # programming password encryption 4-8 # 4-8 new new encryption # (4) modify the open delay: Press * # 25 # Enter the programming code to open the door three times # Default 3 seconds, up to 255 seconds. (5) Anti detection door password settings: Press * # 26 # a programming error code number + two lock time # 6, the special features on the machine: (1) On all cards to open the door: Press * # 83 # programming password Note: After the success of all cards can be turned to open the door, can be used without registration, open after use must be closed. (2) Turn on automatic registration function: Press * # 84 # programming password Note: After the success of all the cards turn can open the door and also automatically registered after the closure of the effective permissions card as normal. 3/4 (3) Close the card to open the door fully automatic registration function: Press * # 85 # programming password Fifth, the installation wiring diagram: 1, +12 V: Power supply positive 2, GND: Power supply negative 3, NO: normally open relay points 4, COM: Relay common point 5, NC: normally closed relay 6, OPEN: exit button switch 7, BELL: pick doorbell switch 4/4