Download Embedded Computer

Embedded Computer
User Manual
Safety maintenance:
Please maintain your system properly to make sure its service life and reduce the damage risk.

It should avoid the humidity and extreme temperature when being used.

Avoid prolonged exposure of the unit to direct sunlight or strong ultraviolet light.

Do not drop the unit or let it be in any place with severe shock / vibration.

Please avoid the collision as the LCD screen is very easy to be scratched. Do not use any
sharp object to touch the screen.

To clean the outside fuselage, please turn off the power, unplug the power cord, scrub /
wipe with slightly damp soft cloth. When cleaning the screen, please wipe with the lint free
soft cloth.

Never attempt to disassemble or repair the machine, otherwise the unit may be damaged.

Do not place your unit or accessories together with other flammable liquids, gases, or other
explosive materials, to avoid danger.

Please unplug the power plug and remove the built-in battery if long-term no-use, or
thunder weather.
Content
1. Product Description....................................................................................................................... 1
1.1. Brief Introduction ............................................................................................................... 1
1.2. Optional Functions ............................................................................................................. 1
1.3. Basic Parameters ................................................................................................................ 1
2. Structure Function Explanation..................................................................................................... 2
3. Extended Cable Definition ............................................................................................................ 4
4. Settings for Serial Port by manual ................................................................................................ 5
4.1. Definition for Serial Port Connection: ............................................................................... 5
4.2. Serial Port setting ............................................................................................................... 5
5. Instructions for 3G Card & TF Card ............................................................................................. 6
6. Testing for GPIO & CAN ............................................................................................................. 8
6.1. Console Login.............................................................................................................. 8
6.2. Application Software .................................................................................................. 8
6.3. Interface Application ................................................................................................ 12
7. Accessories .................................................................................................................................. 17
YP-01160723
1. Product Description
1.1. Brief Introduction

7", 16:9 Digital touch wide screen, 800×480 physical resolution, with rich colors;

Comply with IP 64 Waterproof Standard;

Linux3.14.52 + Debian 8 operation system;

Micro SD (TF) card storage, making the data reading reliable, and daily expansion
convenient;
1.2. Optional Functions

GPS Receiver (external);

Wi-Fi 802.11 b/g/n & Bluetooth (built-in);

3G Modem Module (built-in);

Bluetooth(built-in);

CAN bus×2;
 2200mAh Li-ion battery (built-in);
1.3. Basic Parameters
Configuration
System hardware
Interfaces
Parameters
CPU: Freescale iMX.6 Quad core 800MHz;
Flash: 8GB NAND FLASH;
SDRAM: 1G (Optional 2G) DDR3 RAM;
LAN: Ethernet100/100M (RJ45);
Micro SD(TF) card;
USB Device 2.0×1, USB host 2.0×1;
Earphone output port;
DC power input;
4×RS232 interfaces;
(optional RS485 / RS422 interfaces);
4×GPIO inputs, 6×GPIO outputs;
Touch Panel
Capacitive
Display
7″ LED Backlit
Screen Resolution
800×480 (1152000 pixels)
1
Brightness
450cd/㎡
Contrast
500:1
Viewing Angle
140°/ 120° (H/V)
Power supply
DC 9-36V
Power Consumption
(Normal mode)
≤9W
Power Consumption
(Charging mode)
≤24W
Working Temperature
-10℃ - 65℃
Storage Temperature
-25℃ - 80℃
Dimension (LWD)
220 × 132 × 36.5 (mm)
Weight
830g
2. Structure Function Explanation
1．Power on/off button: Short press to power on the unit; Long press 3 seconds
to power off.
Red LED light: Battery charging.
Green LED light: Battery charging completed or connecting with DC adapter.
2．Backlight control: Adjust screen brightness among 5 levels.
3．Volume +: Increase the volume.
4．Volume -: Decrease the volume.
5．Capacitive Screen.
6．Speaker.
2
7．Front Camera (optional)
: Take photo;
: Exit;
: View photo album;
: Previous photo;
: Return to take photo;
: Next photo;
: Delete photo;
1. Mini USB port: To connect with mini USB cable. (Not Available for Linux OS).
2. 3G card slot: Insert 3G SIM card to connect with wireless network.
3. Micro SD (TF) card slot: Insert micro SD (TF) card to store pictures and other
4. Earphone jack: to connect with stereo headphone
3
data.
3. Extended Cable Definition
No.
1
2
3
4
5
6
7
8
9
Item
Convertor
Com 1 serial port
Com 2 serial port
Com 4 serial port
Serial port
USB host port
LAN port
Power
Gpio port
Specification
To connect with device cable
RS232 serial port
RS232 serial port or GPS port
RS232 or RS422 serial port switch
RS232 or RS485 serial port switch
For data transmitting
For network connection
To connect with DC adapter
Gpio input
(0~5V)
Gpio output
(0V or 5V)
1
2
3
4
Gpio_57
Gpio_82
Gpio_87
Gpio_92
Br&W
B&W
LG
P
5
6
7
8
9
10
Gpio
Gpio
Gpio
Gpio
Gpio
Gpio
_93
_191
_9
_171
_174
_175
W
Gr
Pu
Bl
G
Y
11
Gpio GND
CAN
10
Definition port
RS422
B
13
14
15
16
CAN1-
CAN1+
CAN2-
CAN2+
O
R
Br
R&W
3
4
5
6
G (A)
Y (B)
O (Z)
R (Y)
PS: O: “orange”, W: “white”, R: “red”, Br: “brown”, B: “black”, LG: “light green”, P: “pink”, Gr:
“gray”, Pu: “purple”, Bl: “blue”, G: “green”, Y: “yellow”.
4
4. Settings for Serial Port by manual
4.1. Definition for Serial Port Connection:

RS 485 (B&B, Br&Br)

RS 422 (Y&O, G&R,O&Y, R&G)
PS: B: “black”, Br: “brown”, Y: “yellow”, O: “orange”, G: “green”, R: “red”,
4.2. Serial Port setting
PS: Once the dust-proof iron sheet on the rear panel of is opened, the
warranty.
1. Open the dust-proof iron sheet.
unit will be out of
2. Please find SW3 and SW33 adjustment control buttons on the main board, arrow mark is
also shown on the main board.
COM3: Slide SW3 button to arrow mark to switch RS485, opposite to switch
RS232.
COM4: Slide SW33 button to arrow mark to switch RS422, opposite to switch
RS232.
5
5. Instructions for 3G Card & TF Card

The 3G card, memory card and the card connectors on the device are
precision electronic components. When inserting the 3G card or memory card into the
card connectors, you much insert after aligning to the position accurately in case of
damaging the components. When removing the 3G card or memory card, please
slightly push the upper edge of the card to loosen the card, then pull it out.

The memory card will get heat after long time working. It is a normal phenomenon.

The data stored on the memory card may be damaged if the card is not used correctly,
or the power is cut off or the card is pulled out when reading data.

If you don’t use 3G card correctly, or cutting off the power or pulling out the 3G card
during the operation, the network will be interrupted automatically.

If you do not use micro SD card for a long time, please put it into packing box or bag.
Insert the memory card as shown in below picture,

Find the location of the 3G card or memory card slot on
the unit, then push the 3G card or Micro SD card with
the part of the metal contacts outward until it snaps into
the location.

Do not force to Insert the 3G card or memory card to
avoid damaging the card.

Please do NOT insert micro SD card into 3G card slot
improperly, otherwise, the micro SD will be very difficult
to be taken out, or may even be damaged.

Maximum 8G micro SD supported (supporting hot-swappable).
Testing method: In the state of power-on, the screen will automatically display the TF card
content after inserting the TF card, the screen will automatically close its window when
pulling out the TF card, its path is under “/media/TF card name/”.
6
Operation for TF card
Once power-on, the screen will automatically display the TF card content after inserting the
TF card, its path is under “/media/TF card name/”. Shown as below,
TF card path
7
6. Testing for GPIO & CAN
Basic Operations
6.1. Console Login
① The product is connected to the PC COM1.
② Setting up the PC serial port parameters as shown in Figure 1.
Figure 1
③ Username: root Password:(leave it blank). Login successful shown in Figure 2
Figure 2
6.2. Application Software
1、Soft keyboard Florence Virtual Keyboard shown in Figure 3.
Application Menu-->Accessories.
Function buttons area are shown in the left of keyboard including hidden, set, move,
zoom in, zoom out.
8
Figure 3
2、Network settings: Wick Network Manager shown in Figure 4.
Application Menu-->Internet-->Wick Network Manager.
Click on the task bar shown in Fig. 4
to open quickly.
Figure 4
Network: SSID
Switch off Wi-Fi/Switch on Wi-Fi : on/off Wi-Fi.
Disconnect All: Disconnect all connections.
Refresh: Refresh the list to scan network.
It indicates the wired network.
It indicates the wireless network.
9
Preferences: Set up as shown in Figure 5.
Default setting:
General Settings:
Wireless interface=wlan1
Wired interface = eth0
External programs:
DHCP Client=dhclient
Other set Automatic
Advanced Settings:
Driver= nl80211
Backend=external
Figure 5
Disconnect：Disconnected Network.
Connect: Connect Network.
Properties：Shown in Figure 6.
Setting IP, DNS, wireless passwords.
3、Browser: Bluetooth Manager shown in Figure 7.
Application Menu-->Internet-->Iceweasel.
Figure 7
10
Figure 6
4、Bluetooth: Bluetooth Manager shown in Figure 8.
Application Menu-->Settings-->Bluetooth Manager.
Click on the task bar to turn on Bluetooth
quickly as shown in Fig.8.
Bluetooth device：
Adapter: Visibility settings, the Bluetooth name set.
: Find a Bluetooth device.
: Select the device to match.
: Equipment Trust settings.
: Remove the device.
: Send File.
Figure 8
5、Multimedia shown in Figure 9.
Application Menu-->Multimedia.
Figure 9
11
6.3. Interface Application
1. RS232/RS485/RS422 run CuteCom application shown in Figure 10.
Application Menu-->Other-->CuteCom.
Figure 10
Device：Input the device node / dev / ttymxc * by soft keyboard, please refer
to the connection interface selection and select the interface Remarks.
Correspondence between the RS232 interface and the device node:
COM1 =/dev/ttymxc0
COM2 =/dev/ttymxc1
COM3 =/dev/ttymxc4
COM4 =/dev/ttymxc3
Correspondence between the RS485 interface and the device node:
RS485 =/dev/ttymxc4
Correspondence between the RS422 interface and the device node:
RS422=/dev/ttymxc3
12
2. SIM card signal status strength see Figure 11.
Application Menu-->Other-->3G.
Insert the SIM card from the SIM card location, reboot the system.
Figure 11
3、File Manager shown in Figure 12.
Insert TF card or USB flash disk, it will automatically pop-up
and
Double-click the icon to open, or open from the Application
Application Menu-->File Manager.
Figure 12
Remarks: Mounted with file manager first when Access to external memory.
13
.
.
4、CAN bus CAN TEST shown in Figure 13.
Application Menu-->Other-->Can.
Status settings: receive(recv), send(send).
Baud rate settings: Default 125,000;
Figure 13
5、GPIO shown in Figure 14 using GPIO TEST.
Application Menu-->Other-->GPIO.
Figure 14
Gpio: Refresh four input IO level state.
Gpio_out 0: 6 IO output high level 5V.
Gpio_out 1: 6 IO output low level 0V.
14
6、USB interface
Test function： USB HOST, USB MINI, Normal use, hot plug.
Test Methods： USB HOST interfaces are inserted into the mouse and keyboard,
if plug and play enabled; The screen will automatically display the
contents inside if USB flash disk inserted, and the screen window
will automatically turn off if plugged out, path at “/media/ USB flash
disk name/” which means this function works;
USB MINI: It can be used for refreshing the program, indicating that
this function is normal.
7、Network Port Test
Test function：Test unit via Ethernet 100 / 1000M (RJ45), it can access to the
Internet normally.
Test Methods：As shown in the following figure, click Start -> select "Other" ->
select "netset".
Double-click to open the following network configuration screen,
15
In the following figure after enter the IP address, gateway and DNS, Click OK to exit
the screen. Then click "OK" for a network connection.
After connected to the network. Open your browser and enter the URL, as shown
below, to the Internet.
16
7. Accessories
Standard accessories:
1. Extended cable
2. DC 12V adapter
3. Mini USB cable
4. CD driver with SDK (N/A)
5. Capacitive Touch pen
6. User Manual
1piece
1piece
1piece
1piece
1piece
1copy
Optional accessories:
1. GPS antenna
1piece
(connect with COM2 port on the extended cable)
2. 75mm VESA rail slot
1piece
3. 75mm VESA folding bracket
1piece
4. 2200mAh Li-ion battery
1piece (built-in)
5. Micro SD (TF) card
1piece
Due to constant effort to improve products and product
features, specifications may change without notice.
17
18