Download RADIO RECEIVER RHRFSPW Button select Format and protocol

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Switched-mode power supply wikipedia , lookup

Flip-flop (electronics) wikipedia , lookup

Heterodyne wikipedia , lookup

Time-to-digital converter wikipedia , lookup

Immunity-aware programming wikipedia , lookup

Transcript
Select
Engineered
Systems, Inc.
RADIO RECEIVER
RHRFSPW
GENERAL INFORMATION
BUTTON SELECT
The RHRFSPW is a 54 bit rolling code radio receiver for connection to an access control system. The code received is decrypted, then sent to the output terminals according the format
and protocol selected on the internal dip-switches. These different outputs may be used with many access control systems.
The button select switch matches the transmitter button
pressed with the dip switch selected. The left button on the
transmitter is button select 1 and the right button on the
transmitter is button select 2. If both switches are enabled,
then either button will produce an output. Button select 3 &
4 are used with the RTSP4 (4 button) transmitter.
TECHNICAL SPECIFICATIONS
Enable
Power supply
Power consumption
Receiver type
Reception frequency
Frequency stability
Receiver sensitivity
Code received
Operating temperature
Dimensions
Weight
Output formats
Disable
: 12/24 Volts ac or dc
: 30mA
: Super-heterodyne
: 433.920 MHz
: +- 180 PPM
: < 1.0 uV
: 54 bits rolling code
: -15C to +55C
: 5.6” x 4.3” x 1.5”
: 8 oz
: Wiegand, RS232, data/clock
OUTPUT FORMAT AND PROTOCOL
1 2
3 4
This figure shows button 1 enabled.
OUTPUT LEVEL SELECT
This jumper selects the output signals (Wiegand and Data
Clock) to be 5V or 12V.
5
12
CONNECTIONS
WIEGAND
26 Bit with site code
26 Bit with site code 0
37 Bit HID
DATA/CLOCK
RS232
D0
D1 COM EN
24 ac/dc +
COM power supply
12 ac/dc +
D0 Wiegand Data 0
Data/clock DATA
30 Bit special
Standard ISO track 2, start
sentinel + 16 digits + end
sentinel
24 COM 12
+
+
D1 Wiegand Data 1
Data/clock CLOCK
COM data common
EN /enable
ANT Antenna
Standard ISO track 2, start
sentinel + 16 digits + separator
+ end sentinel + LRC
Button select
Format and protocol
9600 Baud, 8 bit, no
parity, 1 stop bit
Output voltage select
Connections
FCC ID: ON3MRRE
• 7991 West 26th Avenue • Hialeah, Florida 33016
1 (800) 342-5737 • (305) 823-5410 • Fax: (305) 823-5215
E mail [email protected] * web site www.selectses.com
ANT
RS232