Download REOhm damping resistor - REO-USA

REOhm damping resistor
BW R 159
Description
Applications:
Air-cooled dump resistor to absorb high energies within a short time.
> Permanent power: 15000 W
> max. operating voltage: 1200 V
> Pulse load: 750 kW by 2,4 s
> Protection: IP20-IP65
> other power ratings and fixing dimensions on request
º Protection IP00 toIP65
º noiseless
• air-and water-cooled resistors
• high reliability and durability
• Wires are wound at a distance
and spatially separated, ie higher
dielectric strength
• higher mechanical protection
• The resistor can absorb higher
pulse loads and caching
• Resistors are not sensitive to
moisture and dirt
• Low susceptibility to vibration and
oscillation
REOhm resistors BW 150 for wind turbines
Loading, attenuation, absorption or braking resistors are essential components
of a modern wind turbine. They are used to filter out surges or excess energy,
such as braking or starting energy. This function by converting electrical energy
into heat.
Resistors in profile design are fully encupsulated and allow very high degree of
protection up to IP65.
By the design external environmental factors have only a very small effect to the
resistor.
Furthermore, the resistor is very well protected against mechanical stresses.By
this, a long-term reliability is guaranteed.
The design allows high-voltage or current spikes.
Technial Data
continuous power
max. operating voltage
15000 W
1200 V
Stand: 25.10.2012
Irrtümer und Änderungen vorbehalten