* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download SELECTRONIC™ FloWise® EXPOSED 1.6/1.1 GPF DUAL FLUSH
Survey
Document related concepts
Transcript
SELECTRONIC™ FloWise® EXPOSED 1.6/1.1 GPF DUAL FLUSH TOILET FLUSH VALVE HARD-WIRED AC POWERED, SENSOR OPERATED MODEL NUMBER: ❑ 6067.761.002 HARD-WIRED AC POWERED: Includes UL-approved Hard-Wired AC transformer (electrical box by others). 11-1/2" rough-in ❑ 6068.761.002 MULTI-AC POWERED: Includes 10' extension cable. One transformer (sold separately) can operate up to 15 faucets and/or flush valves. 11-1/2" rough-in OPERATING PRESSURE: 25 psi (flowing)-80 psi (static) GENERAL DESCRIPTION: Exposed, Hard-wired AC Powered, Sensor Operated Selectronic™ Water Closet Flush Valve for floor-mounted or wall-hung 1-1/2" top spud bowls. Inlet includes 1" I.P.S. angle stop with back-flow protection, vandal-resistant cap, sweat solder kit, cover tube and wall flange. Outlet includes 1-1/2" vacuum breaker, spud coupling and flange. FLOW REQUIREMENT: 25 gpm (94.6 L/min.) ACCESSORIES: • Cast wall flanges (1" & 1-1/2") • Solid ring pipe supports (2-1/2" & 6" C-E) • Split ring pipe supports (2-1/2" & 6" C-E) PRODUCT FEATURES: • Light flush (1.1 gpf: 30% water savings) if user is in detection zone for 60 seconds or less • Standard flush (1.6 gpf) if user is in detection zone for more than 60 seconds • Electronic flush valve with Selectronic™ proximity system for “Hands Free” operation • Includes UL approved hard-wired AC transformer • Input Voltage: 100 - 250 VAC, 50 / 60 Hz. Output Voltage: 6 VDC. • Self-Cleaning Piston operation with integral wiper spring prevents clogging and reduces maintenance • Piston operation delivers superior flush accuracy and repeatability • Adjustable tailpiece • Chemical resistant EPDM seals are unaffected by chloramines and ammonia • Valve remains closed and does not need to be reset after loss of power or water pressure • Fully Mechanical Manual Override Button can flush toilet during a power outage • Vandal-resistant metal cover plate (for 2-gang electric box supplied by others) with no visible fasteners • Sensor & electronic controls are fully enclosed and water resistant • Range can be adjusted manually or by remote control • Sanitary Flush - Valve automatically flushes after 24 hours of non-use to clean fixture & maintain trap seal • No external volume adjustment • 5 second Arming Delay prevents unintentional flushing • 3-second Flush Delay • Can be installed left or right-handed TYPICAL WATER CLOSET INSTALLATION: AFWALL™ TOILET SHOWN FINISHED WALL 57mm (2-1/4")137mm (5-3/8") 86mm (3-3/8") 160mm (6-1/4") COVER & ELECTRICAL BOX 409mm (16-1/8") -C-L- 293mm (11-1/2") SUPPLY DN 25mm (1" I.P.S.) CRITICAL LEVEL SEE ROUGH-IN ON BACK 115mm - 134mm (4-1/2" - 5-1/4") FINISHED FLOOR MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES RECOMMENDED SPECIFICATION: Electronic proximity infrared sensor activated toilet flush valve shall feature self-cleaning piston valve. Includes a UL listed hard-wired power supply that provides 6 VDC power to run system. Flush volume is determined by amount of time user is in detection zone. 60 seconds or less: 1.1 gpf/4.2 Lpf. More than 60 seconds: 1.6 gpf/6.0 Lpf. Includes a fully mechanical manual over-ride that can provide a complete flush without power. Includes cast brass valve body and metal cover with chrome finish and vandal resistant stop cap. Angle stop with back-flow protection and vacuum breaker included. Flush valve shall be American Standard Model # 606_.761.002. © 2016 AS America Inc. Revised 5/16 SELECTRONIC™ FloWise® EXPOSED 1.6/1.1 GPF DUAL FLUSH TOILET FLUSH VALVE HARD-WIRED AC POWERED, SENSOR OPERATED LISTINGS: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant Roughing-in Dimensions 180 ˚ 160mm (6-1/4) 72mm (2-7/8) MANUAL OVERRIDE BUTTON 2-GANG ELECTRICAL BOX BY OTHERS 160mm (6-1/4) DETECTION ZONE 400mm-800mm (15-3/4 TO 31-1/2) FINISHED WALL 15˚ 116mm (4-5/8) *CRITICAL LEVEL 293mm (11-1/2) 51mm (2") HOLE FOR CONDUIT 45 ˚ 305mm (12 MAX.) 86mm (3-3/8) SUPPLY DN 25mm (1¨ I.P.S.) -C-L- 115mm-134mm (4-1/2 TO 5-1/4) 409mm (16-1/8) 57mm (2-1/4) 137mm (5-3/8) -C-L152mm (6 MIN.) FOR 1-1/2" TOP SPUD FIXTURES TOP OF FIXTURE Right or Left Hand Installation *Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6 " min. (152mm) above fixture. Consult Codes for details. © 2016 AS America Inc. Revised 5/16