Download Telly the Teaching Time Clock #4528 USER`S

Troubleshooting:
Telly the Teaching Time Clock #4528
Problem: Telly does not speak.
Action: Check the batteries for proper instillation and freshness.
Problem: Telly does not play.
Action #1: Rotate (spin) the batteries within the battery compartment to
ensure a good connection. Check that all batteries are installed properly.
Action #2: Check all batteries for freshness, if weak or dead replace with
new batteries. Use an alkaline battery (E.G. Duracell or Energizer brand).
Action#3: Make sure that you have your switch plugged in all the way.
There should be no gaps.
USER’S GUIDE
Action#4: Try your external capability switch with another toy/device to rule
out the switch as the source of the problem.
Care of the Unit:
Telly can be wiped clean with any mild household multi-purpose, nonabrasive cleaner and disinfectant. We recommend Simple Green, which is a
non toxic biodegradable all-purpose cleaner.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
Do not submerge the unit, as it will damage the electrical components.
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-TEC-TOYS or 1-800-832-8697
[email protected]
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
Fun way to learn time!
Press and hold your capability switch and Telly’s hands move around
the dial. Release your switch and Telly will tell you the time in 5
minute increments. Teaches both analog and digital time. Also works
as a real clock with night light. Size: 11"H x 8¼"W x 2½"D. Requires
7 AA Batteries. Weight: 2 ½ lbs.
Operation:
1. Telly requires 7 AA batteries. Use alkaline batteries only (e.g. Duracell
or Energizer brand). Do not use rechargeable batteries or any other type
of batteries because they supply lower voltage and the unit will not
perform properly. Never mix old and new batteries together or different
brands or types together.
2. Turn the unit to face the black battery compartments. Carefully
remove the small screws from the battery compartment covers
using a Phillips head screwdriver, and slide the covers off.
Observing proper (+) & (-) battery polarity, install AA size
batteries into the holders. Replace the battery compartment covers
and screws.
3. To Set the Clock: The two small blue buttons above the digital
display must be held simultaneously until the clock starts flashing
12:00. Pressing the left button changed the hour and the right
button changes the minutes.
4. Connect Telly to any external capability switch via the jack, located on
the back right side of the unit. Telly is equipped with a 1/8-inch jack, for
use with capability switches with a 1/8-inch plug. If you need to use a
1/4- to 1/8-inch adapter use our No.1170 adapter. If purchased
elsewhere, it must be a mono adapter, not stereo.
5. Turn Telly’s ON/OFF switch to ON; there are two volume settings to
choose from as indicated Low and High. When first turned ON a clock
bell will sound and the user will be greeted by Telly saying “Hello how
are you I am Telly the Teaching Time Clock”. Telly has two modes of
operation to chose from, Teaching Time or Quiz Game. After Telly is
turned ON you can select the mode of your choice using the indicating
controls on Telly.
5. In either mode, activating your switch and maintaining activation turns
Telly’s clock hands in a clockwise direction. Stopping activation of your
switch stops the hands moving. In the Tell Time mode, when you stop
Telly’s clock hands, Telly will announce what time it is. The time will
also show on Telly’s digital clock. When using the Quiz Game mode,
Telly will ask you to find a time which Telly chooses randomly.
Important Note: We have covered the clock hands on Telly with a clear
plexiglass cover. Do not try moving Telly’s clock hands by hand, doing
so will damage Telly. The clock hands can only be moved through the
use of your attached switch.
Troubleshooting continued on back page.
Rev 11/12/13