Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Lenses There are two types of lenses: 1) Convex lens or converging lens 2) Concave lens or diverging lens Convex lens: A convex lens converges parallel beams of light Optical centre: is the centre of the lens. Any light ray passes through the optical centre without bending Principal axis: A line that is perpendicular to the lens and passes through the optical centre Focal point: The point at which parallel beams of light converge Focal length: The distance between the optical centre and the focal point Ray diagram The properties of the image from a convex lens can be determined by drawing ray diagrams. Two rays are needed: 1) A ray that passes through the optical centre without bending 2) A ray that is parallel to the principal axis and then bends to pass through the focal point after reaching the lens 3) A third ray can also be used. It passes through the focal point until it meets the lens and after the lens it becomes parallel to the principal axis Note: Rays for virtual images are drawn using dotted lines Virtual images cannot be captured on the screen Properties of image based on object distance from lens Linear magnification: Magnification is the ratio of image size and object size Magnification = image size ÷ object size Applications of lenses A convex lens can be used as a magnifying glass. In order to obtain a large upright image the distance between the Lens(magnifying glass) and object should be less than f A convex lens is used in a photographic enlarger. In order to obtain an image that is larger and real the distance between the object and lens should be between f and 2f A convex lens is used in a projector. In order to obtain an image that is larger and real the distance between the slide and lens should be between f and 2f To obtain a clear image for close by objects using a camera, the distance between the screen and the lens is slightly greater than f To obtain a clear image for far away objects using a camera, the distance between the screen and the lens is equal to f Concave lens A concave lens is a diverging lens as it diverges parallel beams of light. The rays appear to be diverging from the focal point The image formed by a concave lens is virtual, upright and smaller than the object Eye correction A long sighted person can see objects far away but cannot see nearby objects because his eye lens cannot become thick enough to bend the light rays to meet at the retina. To correct this problem a convex lens is used so that the rays converge to meet at the retina A short sighted person can see nearby objects but cannot see objects far away because his eye lens cannot become thin enough to make the light rays meet at the retina. To correct this problem a concave lens is used so that the rays diverge a little and then converge at the retina after passing through the eye lens