Download Lecture 24

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Optical aberration wikipedia , lookup

Fourier optics wikipedia , lookup

Ultraviolet–visible spectroscopy wikipedia , lookup

Optical coherence tomography wikipedia , lookup

Thomas Young (scientist) wikipedia , lookup

Anti-reflective coating wikipedia , lookup

Optical amplifier wikipedia , lookup

Retroreflector wikipedia , lookup

Ellipsometry wikipedia , lookup

Magnetic circular dichroism wikipedia , lookup

Optical rogue waves wikipedia , lookup

Nonlinear optics wikipedia , lookup

Polarizer wikipedia , lookup

Birefringence wikipedia , lookup

Transcript
Lecture 24
Semiconductor Detectors - Photodetectors
 Principle of the pn junction photodiode
 Absorption coefficient and photodiode materials
 Properties of semiconductor detectors
 The pin photodiodes
 Avalanche photodiodes
 Schottky junction photodetector
First Name
Last Name
Title
Date
Alexandra
Stambaugh
Slow Light on Chip
Dec 8th
Gopikrishnan
Gopalakrishnan Meena
Ring Resonators and
Optofluidics
Dec 8th
Md. Mahmudur
Rahman
Chromatic dispersion in
digital coherent receiver
Dec 8th
Venkateswara
Penumuchu
LEDs Efficiency for Lighting
Dec 8th
Golam Md. Imran
Hossain
Challenges of hot electron
extraction and beyond
Dec 10th
Jeffery
Bertalotto
WDM (Wavelength-Division
Multiplexing)
Dec 10th
Heather Renee
Sully
Optical Fiber Fabrication
Nitish
Padgaonkar
Photovoltaics
Dec 10th
Can
Gao
Synchronous Digital Hierarchy
Dec 12th
Avirudh
Kaushik
AMOLED Displays
Dec 12th
Tianchi
Zeng
Chip Optical Interconnection
Dec 12th
Dec 10th
i(t)
Noise in Photodiodes
Constant illumination
What is the RMS of fluctuations?
Noise current = Total
RMS current fluctuations
The dark current has shot noise or fluctuations about Id,
in-dark = (2eIdB)1/2
B = Bandwidth
Quantum noise is due to the photon nature of light and its effects are the same
as shot noise. Photocurrent has quantum noise or shot noise
in-quantum = (2eIphB)1/2
Noise in
Photodiodes
Total shot noise current, in
i i
2
n
2
ndark
i
2
nquantum
in = [2e(Id + Iph)B]1/2
We can conceptually view the photodetector current as
Id + Iph + in
This flows through a load resistor RL and voltage across RL is
amplified by A to give Vout
The noise voltage (RMS) due to shot noise in PD = inRLA
Noise in Photodiodes
Total current flowing into RL has three components:
Id = Dark current. In principle, we can subtract this or block it with a
capacitor if Iph is an ac (transient) signal.
Iph = Photocurrent. This is the signal. We need this. It could be a steady
or varying (ac or transient) signal.
in = Total shot noise. Due to shot noise from Id and Iph. We cannot
eliminate this.
Noise in Photodiodes
Noise in PD abd RL
Power in shot noise in PD
= in2RL = [2e(Id + Iph)B]RL
Power in thermal fluctuations in RL = 4kBTB
Important Note: Total noise is always found by first summing the average powers involved in
individual fluctuations e.g. power in shot noise + power in thermal noise
Noise in the amplifier A must also be included
See advanced textbooks
Signal to Noise Ratio
Signal Power
SNR 
Noise Power
SNR 
2
I ph
RL
i RL  4k BTB
2
n

2e( I
2
I ph
d
 I ph ) B  
4k BTB
RL
Important Note: Total noise is always found by first summing the average powers
involved in individual fluctuations e.g. power in shot noise + power in thermal
noise
Noise Equivalent Power
Definition
Input power for SNR =1 P1
NEP =
= 1/2
B
Bandwidth
NEP is defined as the required optical input power to achieve a SNR
of 1 within a bandwidth of 1 Hz
1/2
P1
1
NEP = 1/2 = éë 2e(I d + I ph )ùû
B
R
Units for NEP are W Hz–1/2
Noise Equivalent Power
Definition
Input power for SNR =1 P1
NEP =
= 1/2
B
Bandwidth
NEP is defined as the required optical input power to achieve a SNR
of 1 within a bandwidth of 1 Hz
1/2
P1
1
NEP = 1/2 = éë 2e(I d + I ph )ùû
B
R
Detectivit y 
1
NEP
Units for NEP are W Hz–1/2
A1 / 2
D* 
NEP
Specific detectivity D*
cm Hz-1/2 W-1, or Jones
NEP and Dark Current
EXAMPLE: SNR of a receiver
Solution (continued)
Shot noise current from the detector = [2e(Id + Iph)B]1/2 = 0.047 nA
1/2
é 4k BTB ù
Thermal Noise = ê
ú
R
ë
û
L
= 1.29 nA
Thus, the noise contribution from RL is greater than that from the
photodiode. The SNR is
(5  10 9 A) 2
SNR 
= 15.0
9
2
9
2
(0.047  10 A)  (1.29  10 A)
Generally SNR is quoted in decibels. We need 10log(SNR), or
10log(15.0) i.e., 11.8 dB. Clearly, the load resistance has a dramatic effect
on the overall noise performance.
Linearly Polarized Light

A linearly polarized wave has its electric field oscillations defined along a line
perpendicular to the direction of propagation, z. The field vector E and z define a
plane of polarization.

The E-field oscillations are contained in the plane of polarization.

A linearly polarized light at any instant can be represented by the superposition
of two fields Ex and Ey with the right magnitude and phase
Circularly Polarized Light
A right circularly polarized light. The field vector E is always at right
angles to z, rotates clockwise around z with time, and traces out a
full circle over one wavelength of distance propagated.
The Phase Difference
Examples of linearly, (a) and (b), and circularly polarized light (c) and (d); (c)
is right circularly and (d) is left circularly polarized light (as seen when the
wave directly approaches a viewer)
Elliptically Polarized Light
Polarizers
A polarizer allows field oscillations along a
particular direction transmission axis to pass through
Transmission axis (TA)
The wire grid-acts as a polarizer
There are many types of polarizers
Malus’s Law
I (q ) = I ( 0 ) cos q
2




Randomly polarized light is incident on a Polarizer 1 with a transmission axis TA1.
Emerging light from Polarizer 1 is linearly polarized with E along TA1.
Light is incident on Polarizer 2 (analyzer) with a transmission axis TA2 at an angle θ to TA1.
Detector measures the intensity of the incident light.
Optical Anisotropy
A line viewed through a cubic sodium chloride (halite) crystal (optically
isotropic) and a calcite crystal (optically anisotropic)
Optically Isotropic Materials
Liquids, glasses and cubic
crystals are optically anisotropic
The refractive index is the same in all
directions for all polarizations of the field
Sodium chloride (halite) crystal
Many crystals are optically anisotropic
This line is due to the “extraordinary wave”
The calcite crystal has two refractive
indices
The crystal exhibits double refraction
This line is due to the “ordinary wave”
Photo by SK
A calcite crystal
Uniaxial Birefringent Crsytal
Two polaroid analyzers are placed with their transmission axes, along
Images
viewed
throughat
a calcite
polarizations.
Two polaroid ray,
analyzers are placed
the
long
edges,
right crystal
angleshave
to orthogonal
each other.
The ordinary
with their transmission axes, along the long edges, at right angles to each other. The ordinary ray,
undeflected,
goes through the left polarizer whereas the extraordinary
undeflected, goes through the left polarizer whereas the extraordinary wave, deflected, goes through the
wave,
deflected,
goestherefore
through
right polarizations
polarizer. The two waves
right polarizer.
The two waves
havethe
orthogonal
therefore have orthogonal polarizations.
Principal refractive indices of some optically isotropic and anisotropic
crystals (near 589 nm, yellow Na-D line)
Optically isotropic
Uniaxial - Positive
Glass (crown)
Diamond
Fluorite (CaF2)
Ice
Quartz
Rutile (TiO2)
Uniaxial - Negative
Biaxial
Calcite (CaCO3)
Tourmaline
Lithium niobate
(LiNbO3)
Mica (muscovite)
n = no
1.510
2.417
1.434
no
ne
no
ne
n1
n2
1.309
1.5442
2.616
1.658
1.669
2.29
1.5601
1.3105
1.5533
2.903
1.486
1.638
2.20
1.5936
n3
1.5977
Optical Indicatrix
LEFT: Fresnel's ellipsoid (for n1 = n2 < n3; quartz)
RIGHT: An EM wave propagating along OP at an angle q to the optic axis.
Optical Indicatrix
1
cos  sin 


2
2
2
ne ( )
no
ne
2
2
Wave Propagation in a Uniaxial
Crystal
Eo = Eo-wave and Ee = Ee-wave
(a) Wave propagation along the optic axis.
(b) Wave propagation normal to optic axis.
Power Flow in Extraordinary Wave
(a) Wavevector surface cuts in the xz plane for o- and e-waves.
(b) An extraordinary wave in an anisotropic crystal with a ke at an angle to the
optic axis. The electric field is not normal to ke. The energy flow (group
velocity) is along Se which is different than ke.
Calcite Rhomb
An EM wave that is off the optic axis of a calcite crystal splits into two
waves called ordinary and extraordinary waves. These waves have
orthogonal polarizations and travel with different velocities. The o-wave has
a polarization that is always perpendicular to the optical axis.