Download Item Spec`s Spec`s with Sw DL 3155E16 TRANSISTOR FEEDBACK

Item
DL 3155E16
Spec's
Spec's with Sw
TRANSISTOR FEEDBACK CIRCUITS - didactic equipment - circuit blocks:
series Feedback/Shunt Feedback, multistage shunt-series feedback,
attenuator, multistage series-shunt feedback, differential amplifier theoretical topics: typical quantities of a feedback amplifier, feedback of
a multistage amplifier, basic configurations of the feedback amplifiers,
the effects of series feedback on ac gain, the effects of negative series
feedback on bandwidth, the effects of series feedback on input and
output impedance, the effects of shunt feedback on ac gain, the effects
of shunt feedback on input and output impedance, multistage shuntseries and series-shunt feedback, the shunt-series multistage amplifier
current gain, shunt-series multistage amplifier output impedance, seriesshunt multistage amplifier voltage gain, series-shunt multistage
amplifier output impedance, differential amplifier operation, singleended and differential gain characteristic, common mode gain and
rejection ratio. Fault simulation. It must be possible to perform the
following experiences: Series feedback, Shunt feedback, Multistage
shunt-series feedback, Multistage series-shunt feedback, Differential
amplifier. The faults must be inserted by microswitches mounted on the
board; the module must be provided with a EISA BUS 31+18 INTERFACE,
connections and test points by 2mm terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.
TRANSISTOR FEEDBACK CIRCUITS - didactic equipment - circuit blocks:
series Feedback/Shunt Feedback, multistage shunt-series feedback,
attenuator, multistage series-shunt feedback, differential amplifier theoretical topics: typical quantities of a feedback amplifier, feedback of a
multistage amplifier, basic configurations of the feedback amplifiers, the
effects of series feedback on ac gain, the effects of negative series
feedback on bandwidth, the effects of series feedback on input and
output impedance, the effects of shunt feedback on ac gain, the effects of
shunt feedback on input and output impedance, multistage shunt-series
and series-shunt feedback, the shunt-series multistage amplifier current
gain, shunt-series multistage amplifier output impedance, series-shunt
multistage amplifier voltage gain, series-shunt multistage amplifier output
impedance, differential amplifier operation, single-ended and differential
gain characteristic, common mode gain and rejection ratio. Fault
simulation. It must be possible to perform the following experiences:
Series feedback, Shunt feedback, Multistage shunt-series feedback,
Multistage series-shunt feedback, Differential amplifier. The faults must
be inserted by software and by microswitches mounted on the board. The
module must be provided with a EISA BUS 31+18 INTERFACE for
connection to power supply and PC, with a software able to allow the
study of theoretical topics through PC with hyper textual navigation
according to the HTML standard. Connections and test points by 2mm
terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.