Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download CODE SPECIFICATIONS Quantity DL 3155BRS MODULE WITH
Document related concepts
Transcript
CODE DL 3155BRS SPECIFICATIONS MODULE WITH EXPANSION SUB-MODULES – didactic equipment Didactic system that provides the students with a set of basic concepts oriented to the study of basic electronics, in an easy and progressive way.The modules constituting this didactical board are specifically aimed at representing, in a specific and reduced form, a wider and more complex system addressed mainly to the study of basic electronics. This trainer is composed of a development module that will contain 9 free slots on which electronic expansion sub-boards can be inserted. Each slot contains two 10-pins connectors in the upper part and one 10-pin connector in the lower part and these connectors will give access to the internal input and output points of the sub-boards. The module is also provided with connectors for the power supply of the sub-modules. Power supply: +15Vdc, -15Vdc, +5Vdc, -5Vdc, +V, -V It is possible also to insert faults in each sub-boards in order to experience various troubleshooting techniques. The faults insertion is possible through micro-switches available on the mother board or through the software in case power supplies are used The system includes the following sub-modules: Logic gate module - Purpose: study of a simple combinatory logic Base of transistor application module - Purpose: Study of an NPN BJT in common emitter configuration. Sequential logic module - Purpose: Study of a sequential logic counter able to count forward and backward in sequential mode Signal filters module - Purpose: Basic study of two first order passive filters Multistage BJTs module - Purpose: Basic study of a coupling between two Class A transistor amplifiers Operational Amplifier Circuits module - Purpose: Study of the TL081 operational amplifier in closed loop DC fundamentals module - Purpose: Basic study of three different resistive networks Push-pull stage module - Purpose: Study of an amplifier with push-pull stage JFET amplifier module - Purpose: Basic study of JFET (Junction Effect Field Transistor) amplifier MOSFET amplifier module - Purpose: Basic study of the single gate MOSFET amplifier DIAC and TRIAC module - Purpose: Basic study of the TRIAC and DIAC components SCR module - Purpose: Basic study of the SCR component UJT module - Purpose: Basic study of the UJT component Oscillators module - Purpose: Basic study of different oscillator configurations Timer 555 module - Purpose: Basic study of the NE555 component A/D and D/A converters module - Purpose: Basic study of the Analog to Digital and Digital to Analog Converters Flyback circuit module - Purpose: Basic study of the Flyback circuits Quantity Multiplexer and Demultiplexer module - Purpose: Basic study of the Multiplexer and Demultiplexer components Latch & Buffer module - Purpose: Basic study of the Latch and Buffer components The system is provided with test leads and power supply with the following characteristics: portable unit able to supply power Lamp indicator/interrupter of the mains current Earth Direct current stabilized fixed/variable supplies: - Fixed output +15V, 0.8A - Fixed output -15V, 0.8A - Fixed output +5V, 1A - Fixed output -5V, 1A - Variable output 0 ÷ +15V, 0.8A - Variable output 0 ÷ -15V, 0.8A Displays led of the presence of the output voltage and over current Protection by means of electronic fuse The trainer is supplied with relevant manual in English language.
