Download Indoor HID - Acuity Brands

Indoor HID
Options and Accessories
Family
FileName
Description
RevisionDate
Industrial Accessories
Industrial Accessories
08/15/2007
08/16/2007
Industrial Options
Industrial Options
Industrial Options
05/05/2006
05/05/2006
08/16/2007
Linear Reactor
Linear Reactor
Linear Reactor
Linear Reactor
Linear Reactor
Regulated Lag Ballast
Regulated Lag Ballast
Regulated Lag Ballast
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
Super Constant Wattage Autotransformer
04/03/2006
04/03/2006
04/03/2006
04/03/2006
04/03/2006
04/03/2006
04/03/2006
04/03/2006
08/15/2000
08/15/2000
04/03/2006
04/03/2006
08/15/2000
04/03/2006
08/15/2000
04/03/2006
04/03/2006
04/03/2006
04/03/2006
04/03/2006
Accessories
Indoor HID Accessories ACC1
Indoor HID Accessories ACC2
Options
Indoor HID Options
Indoor HID Options
Indoor HID Options
OPT1
OPT2
OPT3
Pulse Start HID Ballast-Lamp System
Outdoor Pulse Start HID LLRPSL-150-175W
Outdoor Pulse Start HID LLRPSL-200-250W
Outdoor Pulse Start HID LLRPSL-300
Outdoor Pulse Start HID LLRPSL-320-350W
Outdoor Pulse Start HID LLRPSL-400-450W
Outdoor Pulse Start HID RLB-175W
Outdoor Pulse Start HID RLB-200-250W
Outdoor Pulse Start HID RLB-400-450W
Outdoor Pulse Start HID SCWA_O
Outdoor Pulse Start HID SCWA1_O
Outdoor Pulse Start HID SCWA-1000W
Outdoor Pulse Start HID SCWA-150-175W
Outdoor Pulse Start HID SCWA2_O
Outdoor Pulse Start HID SCWA-200-250W
Outdoor Pulse Start HID SCWA3_O
Outdoor Pulse Start HID SCWA-300W
Outdoor Pulse Start HID SCWA-320-350W
Outdoor Pulse Start HID SCWA-400-450W
Outdoor Pulse Start HID SCWA-750W
Outdoor Pulse Start HID SCWA-875W
150-175W
200-250W
320-350W
400-450W
Catalog Number
Notes
Type
Power Hooks and Modules– Shipped Separately
PPH
TPH
Pendant Power Hook. Provides disconnect capability. Order loop, cord and plug on fixture (LCPP
option). UL listed as primary disconnect, load
break device. Specify voltage. Height 5 1/8";width 41/2". Ships as: PPH voltage U, PPH voltage J4, and
PPH voltage J12.1
Through-Wire Power Hook. Provides disconnect
capability. Order loop, cord and plug on fixture
(LCPP option). UL listed as primary disconnect,
load break device. Specify voltage. Height 6-1/4";
width 4-1/2" square. Ships as: TPH voltage U, TPH
voltage J4, and TPH voltage J12.1
HID Lighting
Industrial
Accessories
PPH
Shipped Separately
TPH
Hooks and Loops – Shipped Separately
HKM
HKF
HKMG
LPM
LPF
LPMG
Fixture Hook Male. Die-cast aluminum construction
with spring steel safety clasp standard. Overall
height 3-3/4" including 1" thread. Thread diameter is
3/4". Ships as: HKM U, HKM J4, and HKM J12.
Fixture Hook Female. Female version adds coupling.
Ships as: HKF U, HKF J4, and HKF J12.
Grommeted Fixture Hook. Gasketed cord exit.
Designed to keep dirt from entering hook/cord
opening. Ships as: HKMG U.
Fixture Loop Male. Die-cast aluminum construction.
Loop height 3-1/2" including 3/4" thread. Ships as:
LPM U, LPM J4, and LPM J12.
Fixture Loop Female. Female version adds coupling.
Ships as: LPF U, LPF J4, and LPF J12.
Grommeted Fixture Loop. Gasketed cord exit.
Designed to keep dirt from entering loop/cord
opening. Ships as: LPMG U.
HKM
LPMG
LPF
Safety Chain Accessories – Shipped Separately
SCK
SCK84
SCK108
HKF
HKMG
Safety Chain Kit. Includes 60" (5') of chain and attachment hardware for field installation. Adapts to all
industrial fixtures. Ships as: SCK U, SCK J4, and SCK
J12.
Safety Chain Kit. Same as SCK with 84" (7') of chain.
Ships as: SCK84 U, SCK84 J4, and SCK84 J12.
Safety Chain Kit. Same as SCK with 108" (9') of chain.
Ships as: SCK108 U, SCK108 J4, and SCK108 J12.
SCK
NOTE:
1 For use with Lithonia Lighting LCPP only.
Indoor HID
Sheet # ACC1
OPAC-100
ACC1 Industrial Accessories
Wireguards Accessories – Shipped Separately
GFWG
WGA
Wireguards for open aluminum reflector. Clamp on outside of reflector and allow
relamping without removal. Hot-dipped galvanized steel wire.
WGA14
WGA16
WGA17
WGA22
Wireguard. Use with TH A14 reflector. Must be ordered with fixture;
requires factory-drilled reflector. Ships as: WGA14 U, WGA14 J4 and
WGA14 J12.
Wireguard. Use with TH A16 or THD A16 reflector. Ships as: WGA16 U,
WGA16 J4 and WGA16 J12.
Wireguard. Use with TH A17 reflector. Ships as: WGA17 U, WGA17 J4
and WGA17 J12.
Wireguard. Use with TH A22 reflector. Ships as: WGA22 U and WGA22
J4.
WGG
WG
Full Wireguards – Shipped Separately
FWG
GFWG16
GFWG21
Full Wireguard. Use with Acrylume™ fixtures. Attaches to adjustable
leg mounting screws. Ships separately as: FWG U.
Glass Full Wireguard. Use with TPGE, PG16GLE. Must be ordered with
fixture.
Glass Full Wireguard. Use with TPGE PG21GLE. Must be ordered with
fixture.
FWG
Wireguards – Shipped Installed
Wireguards for lensed optical assemblies.
WG
Wireguard for TX-A26, TX-A30, TX-A23, TX-A20, TH-A16GL, TE-E17, TEE22 or TPGE PG16GLE or TPGE PG21GLE reflector. Must be ordered
with fixture.
SMB18
Mounting Accessories Shipped Separately
SMB
TMB
Single Mounting Bar. White painted steel channel with ¾" pipe couplings
suspend remote ballast housing at one end with splice box, remote socket
and reflector assembly at the other. SMB includes end snap-in closure
strips for wire access. Available in 18" (overall length) SMB18 and 24"
(overall length) SMB24. Center line of pipe couplings are 3" from each
end. Ships as: SMB18 U, SMB18 J4, SMB24 U and SMB24 J4.
Twin Mounting Bar. White painted steel channel suspends remote
optical on each end and one remote ballast housing in the center, or two
complete fixtures, one on each end. Available in 30" (overall length)
TMB30 and 48" (overall length) TMB48. Center line of pipe couplings are
3" from each end. Not all wattages or voltages are available in twinremote ballasts. Ships as: TMB 30 U, TMB 30 J4, TMB48 U and TMB48 J4.
2-7/8"
SMB24
2-7/8"
TMB30
2-7/8"
TMB48
2-7/8"
Lithonia Lighting
Sheet#: ACC1
©1999 Acuity Brands Lighting, Inc. 8/15/07
Indoor HID
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4963, Fax: 770-602-1531
www.lithonia.com
High Bay HID Accessories
Shipped Separately
PPH
Pendant power hook (specify voltage)
TPH
Thru-wire power hook (specify voltage)
HKF
Fixture hook, female
HMK
Fixture hook, male
HKMG
Grommeted fixture hook, male
LPF
Fixture loop, female
LPM
Fixture loop, male
LPMG
Grommeted fixture loop, male
WG
Wire guard
WGA
Wire guard (specify reflector size)
FWG
Full wire guard
GFWG
Glass full wire guard
DCY
Cylinder shade (specify reflector size and color)
DSQ
Square shade (specify reflector size and color)
DHX
Hexagonal shade (specify reflector size and color)
SMB18
18" single-mounting bar
SMB24
24" single-mounting bar
TMB30
30" twin-mounting bar
TMB48
48" twin-mounting bar
SCK
60" safety-chain kit
SCK84
84" safety-chain kit
SCK108
108" safety-chain kit
NOTES:
1 Not UL listed for wet location.
2 A16GL only. Shipped on lens assembly.
3 Shipped on lens assembly.
4 Factory modification required to reflector.
5 Bottom wire guard ships on glass lens assembly.
Top wire guard ships separately.
6 Pendant mount on rigid conduit. Not for use on any
self-leveling hanger.
•Indicates Availability
A14
A15 A16 THD A17 PA22 TPG
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•4
•
•
•
•
•
•
•
•
•
•2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TE TPGE
•1
•1
•1
•1
•1
•1
•1
•1
•3
•
•
•
•
•
•
•
•
•3
•
•5
6
•
•
•
•
•
•
•
•
•6
•6
•
•
•
•
•
•
•
6
•
•6
•6
•
•
•
•
•
•
•
6
•
•6
•6
•
•
•
•
•
•
•
6
•
•6
•6
•
•
•
•
•
•
•
6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•6
•6
•1
•1
•1
•1
•
•
•
•
•
•
•
•
•
•
Optional Architectural Colors available:
DNA Natural aluminum
DBL Black
DSB Steel blue
DWH White
DMB Medium bronze
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSS Sandstone
DDB Dark bronze
Painted items will be white unless noted.
Indoor H.I.D.
Sheet # ACC2
OPAC-110
Low Bay HID Accessories
• Indicates Availability
TX
Shipped Separately
TX
TX
TX
A26 A30 A23 A20
PPH
Pendant power hook (specify voltage)
TPH
Thru-wire power hook (specify voltage)
HKF
Fixture hook, female
HMK
Fixture hook, male
HKMG
Grommeted fixture hook, male
LPF
Fixture loop, female
LPM
Fixture loop, male
LPMG
Grommeted fixture loop, male
WG
Wire guard (specify reflector/refractor size)
FWG
Full wire guard
SMB18
18" single-mounting bar
SMB24
24" single-mounting bar
TMB30
30" twin-mounting bar
TMB48
48" twin-mounting bar
SCK
60" safety-chain kit
SCK84
84" safety-chain kit
SCK108
108" safety-chain kit
NOTES:
1 Not UL listed for wet location.
2 Use only with Lithonia Lighting
LCPP option.
3 Requires PM option.
4 Shipped on lens assembly.
•
•1,2
•1
•1
•1
•1
•1
•1
•4
1,2
TX
•
•
• •
1,2
1,2
•
•
•1,2 •1,2
•1 •1 •1 •1
•1 •1 •1 •1
•1 •1 •1 •1
•1 •1 •1 •1
•1 •1 •1 •1
•1 •1 •1 •1
•4 •4 •4
1,2
•1
•1
•1
•
•
•
•1
•
•
•
1,2
•1
•1
•1
•1
•
•
•
1,2
•1
•1
•1
•1
•
•
•
TX
TX
PA22C/
A125/
A165 PA22GLE PA25D
1,2
•1
•1
•1
•1
•
•
•
•
•1,2
•1
•1
•1
•1
•1
•1
•
•1,2
•1
•1
•1
•1
•1
•
•
•
1,2
•1
•1
•1
•
•
•
1,2
•1
•1
•1
•
•
•
TGL TGR TXD
•1,2,3
•1,2,3
•1,3
•1,3
•1,3
•1,3
•1,3
•1,3
•4
•
•
•
•1,2,3
•1,2,3
•1,3
•1,3
•1,3
•1,3
•1,3
•1,3
•1
•1
•1
•1
•1
•1
•
•
•
•1
•1
•1
•1
•
•
•
Optional Architectural Colors available:
Painted items will be white unless noted.
DNA Natural aluminum
DBL Black
DSB Steel blue
DWH White
DMB Medium bronze
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSS Sandstone
DDB Dark bronze
Lithonia Lighting
Sheet#: ACC2
©1999 Acuity Brands Lighting, Inc. 8/16/07
Indoor HID
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4963, Fax: 770-602-1531
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
HOUSING OPTIONS Shipped installed
SF Single Fuse. Use with 120, 277, 347V. Not available with Multi-tap
ballast. In-line fusing isolates faulty luminaire from circuit.
Externally accessible.
DF Double Fuse. Use with 208, 240, 480V. Not available with Multi-tap
ballast. In-line fusing isolates faulty luminaire from circuit.
Externally accessible.
EC Emergency Circuit. Factory-installed, double-contact, bayonetbase quartz socket with socket leads for use with separate
external emergency power system. (See chart at left.) (150W
maximum on acrylic opticals with lensed bottom.)
HA High Ambient. Allows the industrial luminaires to be operated in
high-ambient temperatures. TX-A30, TX-A26, TX-A20, TX-A23, TXA165: 55°C; TH-A14, TH-A15, TH-A16, TH-A17, TE, TPG, TPGE: 65°C.
QRS Quartz Restrike System. Automatically switches 120V quartz
lamp on if there is a power interruption or brownout significant
enough to cause the primary HID lamp to drop out. The 120V
quartz lamp stays on until the HID fixture restrikes. QRS does not
energize during cold start of HID luminaires. Wiring for the
quartz lamp is internal to the ballast assembly; the 120V
required to operate the quartz lamp is supplied by the ballast.
Wattage of quartz lamp should not exceed that of HID source.
(See chart at left.) (150W maximum on acrylic opticals with
lensed bottom.)
QRSTD Quartz Restrike System Time Delay. Functions as does QRS, but
120V quartz lamp energizes under hot and cold starting
conditions. Quartz lamp will come on when luminaire is
energized and remain on for two minutes after start-up or
restrike of HID lamp. Wiring for the quartz lamp is internal to the
ballast assembly; the 120V required to operate the quartz lamp
is supplied by the ballast. (See chart at left.) (150W maximum on
acrylic opticals with lensed bottom.)
MOUNTING/HOUSING OPTIONS Shipped installed
TOB Through-Wire Outlet Box. A combination outlet box and splice
compartment. Permits entry of 1-1/4" or 3/4" rigid or thin-wall
conduit through easily-removable knockouts. TOB may be
suspension or surface mounted. Height 2-7/8"; width 4-1/2".
TOBP Through-Wire Outlet Box Plug-In. Provides plug-in flexibility of
conventional power hook and reduces overall height. Female
receptacle part of TOBP box. Male plug is factory installed to
ballast housing. This option is not rated as a load break device.
Height 2-7/8"; width 4-1/2". Permits entry of rigid 3/4" or thin-wall
conduit through easily removable knockout.
PBP Pendant Box Plug-In. Pendant-mount plug-in outlet box is identical
in function to TOBP, except for pendant mounting. Height 4-1/2"
width and depth 4-1/2".
PSB Pendant Splice Box. Use with TG. Permits rigid pendant mounting.
PMB Pendant Mount Box. Use with TGL, TGR. Permits rigid pendant
mounting.
HID Lighting
Industrial
Options
SF
DF
Factory Installed
QRS
HID
Wattage
150 & below
175
250
Quartz
Wattage
Quartz Lamp Type
(Lamp by Others)
100
150
Double
Contact
Bayonet
Base
120V Lamp
250
400
250
1000
500
TOBP
TOB
PBP
PSB (TG)
PM (TGL, TGR)
Indoor H.I.D.
Sheet # OPT1
OPAC-120
OPT1 Industrial Options
REMOTE BALLAST OPTIONS Shipped installed
TR Remote Ballast. Includes ballast housing and remote optical with
RSBA or RSBB. Does not include interconnecting wiring. Add TR to
the end of fixture line item.
RSBA Remote Splice Box. Adjustable for TH A16, TH A17, TH A14, TH A15,
TH-PA22/PA25 high bay optical assemblies; 4-7/8" x 4-1/4" x 3-3/8".
RSBB Remote Splice Box. Bolt-on for TE, TX A30, TX A26, TX A20, TX A23,
TX A165, TX-PA22/PA25 and enclosed or low bay optical assemblies; 4-7/8" x 4-1/4" x 3-3/8".
RC3NP Remote Ballast with Prewired cable. Includes ballast housing
and remote optical with RPMA or RPMB and 3 feet of prewired
cable harness with Male and Female 20-amp twist lock plug
(C3NP). Add RC3NP to the end of fixture line item.
TR
RSBB
RSBA
Ballast Options Shipped installed
CWI
MRB
ENC
RLB
LLRPSL
SCWA
Constant-Wattage Isolated Ballast. 120, 208, 240V in Canada. Not
available in all fixtures. Consult factory.
Magnetic Regulator Ballast. 70–400W HPS. Not available in all voltages. Consult factory.
Encapsulated Ballast. Use with 120/277V for 175W, 250W and 400W
metal halide and 250W HPS. Not available TG/TGR.
Regulated Lag Pulse Start Ballast. Use with 175-450W metal halide
fixtures. Consult factory.
Low Loss Reactor Pulse Start Ballast. Use with 150-450W-277V
pulse start metal halide fixtures only. Consult factory.
Super Constant-Wattage Autotransformer Pulse Start Ballast. Use
with 150-1000W pulse start metal halide fixtures only. 120-480V.
Consult factory.
RC3NP
FIXTURE FINISHES
CR Corrosion-Resistant Finish. Clear polyester coating for
additional protection against some corrosive atmospheres.
Consult factory for corrosive compatibility.
CRT Corrosion-Resistant Finish. Teflon coating of all external
luminaire surfaces. Optical assemblies have a clear coat.
Ballast housing/mounting accessories are black. TE, TH A17,
TX A20, TPGE, TX A26 and TPG ballast housing only.
TEF Teflon. Finished reflectors are coated with one-mil layer of
Teflon to provide superior corrosion-resistance and ease of
maintenance. TE, TH A17, TX A20 and TX A26.
For optional architectural colors see architectural color chart for options.
Add as suffix to catalog number.
Lithonia Lighting
Sheet#: OPT1
©2001 Acuity Lighting Group, Inc. 05/06
Indoor HID
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4963, Fax: 770-602-1531
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
HID Lighting
Loop, Cord and Plug Options – Shipped installed
Industrial
Options
LCPP Loop, Cord and Plug. Use with TPH and PPH only. Loop, 16-gauge,
105°C SEO cord and non-NEMA twist-lock 14-amp plug for power
hooks. Plug receptacle is part of PPH accessory. Factory prewired.
Cord length 14". For Canada, consult factory.
LC3P Loop, 3' Cord and NEMA twist-lock plug. For use where receptacle and support means are provided by others. Includes die-cast
aluminum loop, three feet of 16-gauge, 105°C SEO cord and NEMA
configuration twist-lock plug. 15-amp plug standard for 120, 208,
240, 277V; 20-amp plug standard for 480V. Height 3½".
Factory Installed
Hook, Cord and Plug Options – Shipped Installled
HC3P Hook, 3' Cord and NEMA twist-lock plug. Identical in function to
LC3P, except die-cast aluminum hook.
NEMA Plug Table for ordering LC3P or HC3P :
Standard Plug
Optional 20-amp Plug
Voltage
Configuration
Order as
Plug will be
120
L5-15P
LC3P20
L5-20P
208
L6-15P
LC3P20
L6-20P
240
L6-15P
LC3P20
L6-20P
277
L7-15P
LC3P20
L7-20P
480
L8-20P
Standard
—
347
Consult Factory
LCPP
LC3P
HC3P
Loop or Hook, Cord and RELOC – Shipped installed
LOCS Loop, Cord and Reloc OCS connector. Die-cast aluminum loop, 3'
of 16-gauge, 105°C cord and Lithonia Reloc module. Allows the
desired hot conductors needed to energize the fixture to be
selected in the field. Allows fixture to be removed from line without
interruption of branch circuit. Factory prewired. Height 3½". To
order, specify voltage. Available in 120/347V only in Canada. For
additional information, see Reloc OCS component.
HOCS Hook, Cord and Reloc OCS Connector. Same in function as LOCS,
except die-cast hook. To order, specify voltage. Available in 120/
347V only in Canada. For additional information, see Reloc OCS
component.
HOCS
LOCS
LUCP
Universal Cord and Plug Option – Shipped installed
LUCPSF
LUCP Loop, Universal Cord and Plug. Use with UPM1. Provides conventional loop, three feet of 16-gauge, 105°C SEO cord and UCP plug.
Factory prewired. Height is 3½".
LUCPSF Loop, Universal Cord, Plug with Single Fusing. Use with UPM1.
Provides conventional loop, three feet of 16-gauge, 105°C SEO
cord and UCP plug. Factory prewired. Height is 3½".
LUCPDF Loop, Universal Cord, Plug with Double Fusing. Use with UPM1.
Provides conventional loop, three feet of 16-gauge, 105°C SEO
cord and UCP plug. Factory prewired. Height is 3½".
UCP Universal Cord and Plug. Use with UPM (Universal Power Module). 16-gauge, 105°C SEO cord and plug to connect to UPM
provides complete power module assembly. Factory prewired.
Height 3½"; width 4½".
UCPSF Universal Cord and Plug with Single Fuse. Use with UPM for Dead
Front Fusing. Single fuse (120, 277V). If UPM UCP option is used in
conjunction with fusing, the fusing will be installed in UCP plug
head. Shipped installed. UPM height 3½"; width 4½"
UCPDF Universal Cord and Plug with Double Fuse. Use with UPM for
Dead Front Fusing. Double Fuse (208, 240, 480V). If UPM UCP option
is used in conjunction with fusing, the fusing will be installed in
UCP plug head. Shipped installed. UPM height 3½"; width 4½".
LUCPDF
UCP
UCPSF
UCPDF
Indoor H.I.D.
Sheet # OPT2
OPAC-130
OPT2 Industrial Options
Luminaire/Reflector Options – Shipped installed
WL Wet Location Label. Signifies that the luminaire meets all UL requirements for proper, safe operation in environments subject to spray of
noncorrosive and nonflammable liquids. Fixture requires rigid pendant mounting.
CF Charcoal Filter. Used with enclosed and gasketed luminaires. Filter
prevents particulate contaminants from entering the optical assembly during start-up and cool-down periods. Filter consists of activated
charcoal granules freely suspended between multiple layers of polyester filtering material.
OB Open-Bottom Refractor. Use with TX A125/A165 and TGR. Not UL listed for
wet locations. Not available 70-250W metal halide; standard on all 400W.
GL17/GL22 Glass enclosure for TH A17/A22. Frequent cleaning maintains performance. (Does not meet UL 1572 lamp rupture containment specifications.)
Kilowatch Options – Shipped installed
KW1 120V AC control circuit for KiloWatch dual-level ballast system for 50%
wattage reduction. Requires additional KiloWatch system components.
Consult factory or see KiloWatch data pages.
KW150 120V AC control circuit for KiloWatch dual-level ballast system at 50%
light output. Requires additional KiloWatch system components. Consult factory or see KiloWatch data pages.
KW4 277V AC control circuit for KiloWatch dual-level sensor controlled ballast system for 50% wattage reduction. Requires additional KiloWatch
system components. Consult factory or see KiloWatch data pages.
KW450 277V AC control circuit for KiloWatch dual-level sensor controlled ballast system at 50% light output. Requires additional KiloWatch system
components. Consult factory or see KiloWatch data pages.
Lithonia Lighting
Sheet#: OPT2
©1999 Acuity Lighting Group, Inc. 05/06
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4963, Fax: 770-602-1531
www.lithonia.com
High Bay HID Options
• Indicates Availability
Shipped Installed
A14 A15 A16 THD A17 PA22 TPG TE TPGE
SF
Single fuse (120/277/347V only, N/A multi-tap ballast)
•
•
•
•
•
•
•
•
DF
Double fuse (208/240/480V only, N/A multi-tap ballast)
•
•
•
•
•
•
•
•
EC
Emergency circuit (lamp not included)
•
•
•
•
•
HA
65°C ambient operation
•
•
•
•
HA
55°C ambient operation
Std
Std
Std
QRS
Quartz restrike system (lamp not included)
•
•
•
•
•
1
•
1
•
1
•
1
•
1
Std
Std
•
•
•
•3
•
•3
Std
Std
Std
•
•
•
1
1
•1
QRSTD
QRS time delay (lamp not included)
•
TOB
Thru-wire outlet box
•
•
•
•
•
TOBP
Thru-wire outlet box plug-in (N/A multi-tap ballast)
•
•
•
•
•
•
•2
•
PBP
Pendant box plug-in (N/A multi-tap ballast)
•
•
•
•
•
•
•2
•
KW1
KiloWatch 120V control relay
•
•
•
•
•
•
•
•
KW4
KiloWatch 277V control relay
•
•
•
•
•
•
•
•
KW150
KiloWatch 120V control relay-50% light (lumen) output
•
•
•
•
•
•
•
•
KW450
KiloWatch 277V control relay-50% light (lumen) output
•
•
•
•
•
•
•
•
CWI
Constant-wattage isolated ballast (120, 208, 240V for 250-400M, 150-400S)
•
•
•
•
•
•
•
•
MRB
Magnetic regulator ballast (70-400W HPS)
•3
•3
•3
•3
•3
•3
•3
•3
ENC
Encapsulated ballast (Consult Factory for Voltage, Wattage, Lamp Type)
•4
•4
•4
•4
•4
•4
•4
•4
TR
Remote ballast
•
•
•
•
•
•
•2
•
3
3
3
3
3
3
TRPC3
TR with prewired cord and plug
•
•
•
•
•
•
•
•
•
•
2,3
2
•3
LCPP
Loop, cord & plug. Requires TPH or PPH.
•
•
•
•
•
•
•
LC3P
Loop, 3' cord & 15A NEMA twist-lock plug
•5
•5
•5
•5
•5
•5
• 2,5
•5
HC3P
Hook, 3' cord & 15A NEMA twist-lock plug
•5
•5
•5
•5
•5
•5
• 2,5
•5
•
6
•
6
•
6
•
6
•
6
•
6
•
2,6
•6
•
6
•
6
•
6
•
6
•
6
•
6
•
2,6
•6
LOCS
Loop, 3' cord, Reloc OCS (N/A multi-tap ballast)
HOCS
Hook, 3' cord, Reloc OCS (N/A multi-tap ballast)
WL
Wet location. UL listed.
CF
Charcoal filter
•
•
7
Glass lens - Tempered
T73
Corning C73 glass lens
CR
Corrosion-resistant finish (polyester) Housing and Reflector
•8
CRT
Corrosion-resistant finish (teflon) Housing and Reflector
•8
•8
UP
Uplight option
TEF
Teflon finished reflector
•8
•8
RLB
Regulated lag ballast (175-400M )
•
LPI
Lamp shipped in carton with fixture (N/A with incandescent)
SCWA
Super CWA ballast (175- 400M)
•
•
LLRPSL
Pulse start linear reactor (150-400M, 277V only)
•
•
LLCWA
Low loss CWA ballast (400M only)
•
•
Indoor H.I.D.
•
7
GL
NOTES:
1 N/A with all other options. Consult factory.
2 Not UL listed for wet locations.
3 N/A for all voltages/ wattages. Consult factory.
4 Available 175-400W metal halide and 250W HPS.
5 20-amp standard on 480V.
6 Frequent cleaning maintains performance.
7 Consult factory for environmental compatibility.
8 Available in Canada 120/347V only.
9 Housing only.
•
•
•
Std
Std
•
•8
•8
•8
• 8,9
• 8,9
•8
• 8,9
• 8,9
•8
• 8,9
•
•
•
•8
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Optional architectural colors available:
DNA
Natural aluminum
DBL
Black
DSB
Steel blue
DWH White
DMB Medium bronze
DGC Charcoal gray
DTG
Tennis green
DBR Bright red
DSS
Sandstone
DDB Dark bronze
Sheet # OPT3
OPAC-140
Low Bay HID Options
• Indicates Availability
A26
Shipped Installed
SF
DF
EC
HA
QRS
QRSTD
TOB
TOBP
PBP
PM
JBP
PJBP
PSB
KW1
KW4
KW150
KW450
CWI
MRB
ENC
TR
TRPC3
LCPP
LC3P
HC3P
LOCS
HOCS
WL
CF
OB
CR
CRT
TEF
RLB
LPI
SCWA
LLRPSL
A30
A23 TXD A20
TX
TX
TX
TG
TGL
TGR
A125/ PA22GLE PA22C/
A165
PA25D
Single fuse (120/277/347V only, N/A multi-tap ballast)
•
Double fuse (208/240/480V only, N/A multi-tap ballast)
•
Emergency circuit (lamp not included)
•
55°C ambient operation
•
Quartz restrike system (lamp not included)
•
QRS time delay (lamp not included)
•3
Thru-wire outlet box
•4
Thru-wire outlet box plug-in (N/A multi-tap ballast)
•4
Pendant box plug-in (N/A multi-tap ballast)
•4
Pendant mount
Junction box plug-in
Pendant junction box plug-in
Pendant splice box
Std
KiloWatch 120V control relay
•
KiloWatch 277V control relay
•
KiloWatch 120V control relay-50% lumen output
•
KiloWatch 277V control relay-50% lumen output
•
Constant-wattage isolated ballast
•
(120, 208, 240V/ 250-400M, 150-400S)
Magnetic regulator ballast (70-400W HPS)
•5
Encapsulated ballast
•5,6
Remote ballast
•4
TR with prewired cord and plug
•4,5
Loop, cord & plug. Requires TPH or PPH.
•4,7
Loop, 3' cord & 15A NEMA twist-lock plug
•4,7
Hook, 3' cord & 15A NEMA twist-lock plug
•4,7
Loop, 3' cord, Reloc OCS (N/A multi-tap ballast)
•4,10
Hook, 3' cord, Reloc OCS (N/A multi-tap ballast)
•4,10
Wet location. UL listed.
•3
Charcoal filter
•
Open bottom refractor
Corrosion-resistant finish (polyester) Housing and Reflector
•14
Corrosion-resistant finish (teflon) Housing and Reflector
•14
Teflon finished reflector
•14
Regulated lag ballast (175, 250, 400M only)
•
Lamp shipped in carton with fixture (N/A with incandescent)15
Super CWA ballast
•5
Pulse start linear reactor
•5
NOTES:
1 150W maximum.
2 100W maximum.
3 N/A with all other options. Consult factory.
4 Not available with WL option.
5 N/A for all voltages/wattages. Consult factory.
6 Available up to 400M and 250S.
7 20 amp standard on 480V.
8 Must use PSB option.
•
•
•
•
•
•3
•4
•4
•4
•
•
•
•
•
•3
•4
•4
•4
Std
•
•
•
•
Std
•
•
•
•
•
•
•
•
•
•
•3
•4
•4
•4
Std
•
•
•
•
•
•3
•4
•4
•4
•
•
•1
•
•
•1
•
•
•2
•
•
•2
•
•
•2
•1
• 1,3
•4
•4
•4
•1
• 1,3
•4
•4
•4
•2
• 2,3
•2
• 2,3
•2
• 2,3
•
•
•5
•5
•5
•5
•5
•5
•5
•5
•8
• 7,8
• 7,8
•8,10
•8,10
• 4,9
• 4,7,9
• 4,7,9
• 4,9,10
• 4,9,10
•3
• 4,9
• 4,7,9
• 4,7,9
• 4,9,10
• 4,9,10
•3
• 14
•14
• 14
Std
•
•
•
•
Std
•
•
•
•
Std
•
•
•
•
Std
•
•
•
•
•
•
•
•
•
•5
• 5,6
•4
• 4,5
• 4,7
• 4,7
• 4,7
• 4,10
• 4,10
•3
•
•5
• 5,6
•4
• 4,5
• 4,7
• 4,7
• 4,7
• 4,10
• 4,10
•3
•
•5
• 5,6
•4
• 4,5
• 4,7
• 4,7
• 4,7
• 4,10
• 4,10
•3
•
•5
• 5,6
•4
• 4,5
• 4,7
• 4,7
• 4,7
• 4,10
• 4,10
•3
•
•5
• 5,6
•4
• 4,5
• 4,7
• 4,7
• 4,7
•4,10
•4,10
•3
•
•14
•14
•14
• 14
•
•
•14
•14
•14
•
•5
• 5,6
•4
• 4,5
• 4,7
• 4,7
• 4,7
• 4,10
• 4,10
•3,11,12
•12
• 4,13
•14
•
•
•
•5
•5
•5
•5
•5
•5
•
•
•
•
•5
•5
•5
•5
•5
•5
•5
•5
9
10
11
12
13
Must use PM option.
Available in Canada 120/347V only.
16" refractor only.
N/A open bottom.
Not available 70–250M. Standard on
all 400W sources.
14 Consult factory for environmental
compatibility.
Lithonia Lighting
Sheet#: OPT3
©1999 Acuity Brands Lighting, Inc. 8/16/07
Indoor HID
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4963, Fax: 770-602-1531
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for applications such as warehousing, assembly, and retail areas.
ELECTRICAL SYSTEM
The LLRPSL is comprised of a single-coil ballast, ignitor, and capacitor for
lamp stabilization.
Ballast – Available in 277V only. A +/-5% line voltage fluctuation results in a
lamp wattage regulation of +/-10%. Operates lamp at a crest factor of 1.50.
Unlike probe start CWA ballasts which rely on a high crest factor to start the
lamp (typically 1.60), the LLRPSL system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The LLRPSL ballast circuit operates the lamp more gently than a
standard CWA circuit. When it is necessary to supply a Quartz restrike
option, use a SCWA system.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and CSA component listed.
ORDERING INFORMATION
Add LLRPSL after voltage in options part of master catalog number.
Add MP after lamp designation for O (open) rated EX39 exclusionary lamp
socket (175 only).
Example: THP 150MP A17 277 LLRPSL
Pulse Start H.I.D. Lighting
LLRPSL
Linear Reactor
Metal Halide Ballast Option
150 Watts
175 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
150 LLRPSL
Linear Reactor
277 Only
0.70/0.63
170
173
90%
+5%= +10%
175 LLRPSL
Linear Reactor
277 Only
0.80/0.75
205
194
90%
+5%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:LLRPSL-150-175W
OPAC-210
LLRPSL Linear Reactor, 150 & 175 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TX-PA25ALE
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
150 Watts
•1
•1
•
•1
•1
•1
•1
•
175 Watts
•
•
•
•
•
•
•
•
•1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Indicates Compatibility
NOTES
1
Requires ANSI O rated lamp and EX39 exclusionary socket. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#: LLRPSL-150-175W
©2000 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for applications such as warehousing, assembly, and retail areas.
ELECTRICAL SYSTEM
The LLRPSL is comprised of a single-coil ballast, ignitor, and capacitor for
lamp stabilization.
Ballast – Available in 277V only. A +/-5% line voltage fluctuation results in a
lamp wattage regulation of +/-10%. Operates lamp at a crest factor of 1.50.
Unlike probe start CWA ballasts which rely on a high crest factor to start the
lamp (typically 1.60), the LLRPSL system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The LLRPSL ballast circuit operates the lamp more gently than a
standard CWA circuit. When it is necessary to supply a Quartz restrike
option, use a SCWA system.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and CSA component listed.
ORDERING INFORMATION
Add LLRPSL after voltage in options part of master catalog number.
Add MP after lamp designation for O rated EX39 exclusionary lamp socket.
Example: THP 200MP A17 277 LLRPSL
Pulse Start H.I.D. Lighting
LLRPSL
Linear Reactor
Metal Halide Ballast Option
200 Watts
250 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
Input
Watts
Power
Factor
200 LLRPSL
Linear Reactor
277 Only
1.00/0.80
180
218
90%
250 LLRPSL
Linear Reactor
277 Only
1.25/1.10
200
275
90%
Regulation Line V=
Lamp Lumens
+5%= +15%
+5%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:LLRPSL-200-250W
OPAC-220
LLRPSL Linear Reactor, 200 & 250 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TX-PA25ALE
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
200 Watts
•1
•1
•
•1
•1
•1
•1
•
250 Watts
•1
•1
•
•1
•1
•1
•1
•
•
•
•
•
•
•
•
•
•1
•
•1
•
•
•
•
•
•
•
•
•1
•
•1
•
•
• Indicates Compatibility
NOTES
1
Requires ANSI O rated lamp and EX39 exclusionary socket. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:LLRPSL-200-250W
©2000 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for applications such as warehousing, assembly, and retail areas.
ELECTRICAL SYSTEM
The LLRPSL is comprised of a single-coil ballast, ignitor, and capacitor for
lamp stabilization.
Ballast – Available in 277V only. A +/-5% line voltage fluctuation results in a
lamp wattage regulation of +/-10%. Operates lamp at a crest factor of 1.50.
Unlike probe start CWA ballasts which rely on a high crest factor to start the
lamp (typically 1.60), the LLRPSL system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The LLRPSL ballast circuit operates the lamp more gently than a
standard CWA circuit. When it is necessary to supply a Quartz restrike
option, use a SCWA system.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and CSA component listed.
ORDERING INFORMATION
Add LLRPSL after voltage in options part of master catalog number.
Add MP after lamp designation for O rated EX39 exclusionary lamp socket.
Pulse Start H.I.D. Lighting
LLRPSL
Linear Reactor
Metal Halide Ballast Option
300 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
300 LLRPSL
Linear
Reactor
Primary
Voltage
277
Line Current
(Amps)
Start/Operating
1.25/1.55
Primary
Dropout
Voltage
180
Input
Watts
324
Power
Factor
90%
Regulation Line V=
Lamp Watts
+5%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and are
subject to change without notice.
Indoor H.I.D.
Sheet#:LLRPSL-300W
OPAC-230
LLRPSL Linear Reactor, 300 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A22
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA25ALE
TX-PA22GLE
TX-PA25D
TPG/PG16
TPG/PG16A
TPG/PG16A
TPGE/PG16GLE
TPGE/PG16AGLE
TPG/PG21
TPG/PG21A
TPGE/PG21GLE
TPGE/PG21AGLE
TX-A30F
TX-PA25ALEF
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Open
Open
Enclosed
Enclosed
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
300 Watts
•1
•1
•
•1
•1
•1
•
•
•
•
•
•
•
•
•1
•1
•1
•
•
•
•
• Indicates Compatibility
NOTES
1
Requires ANSI O rated lamp and EX39 exclusionary socket. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:LLRPSL-300W
©2002 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for applications such as warehousing, assembly, and retail areas.
ELECTRICAL SYSTEM
The LLRPSL is comprised of a single-coil ballast, ignitor, and capacitor for
lamp stabilization.
Ballast – Available in 277V only. A +/-5% line voltage fluctuation results in a
lamp wattage regulation of +/-10%. Operates lamp at a crest factor of 1.50.
Unlike probe start CWA ballasts which rely on a high crest factor to start the
lamp (typically 1.60), the LLRPSL system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The LLRPSL ballast circuit operates the lamp more gently than a
standard CWA circuit. When it is necessary to supply a Quartz restrike
option, use a SCWA system.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and CSA component listed.
ORDERING INFORMATION
Add LLRPSL after voltage in options part of master catalog number.
Add MP after lamp designation for O rated EX39 exclusionary lamp socket.
Example: THP 320MP A17 277 LLRPSL
Pulse Start H.I.D. Lighting
LLRPSL
Linear Reactor
Metal Halide Ballast Option
320 Watts
350 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
Input
Watts
Power
Factor
320 LLRPSL
Linear Reactor
277 Only
1.70/1.40
200
349
90%
350 LLRPSL
Linear Reactor
277 Only
2.10/1.50
200
380
90%
Regulation Line V=
Lamp Lumens
+5%= +8%
+5%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:LLRPSL-320-350W
OPAC-240
LLRPSL Linear Reactor, 320 & 350 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TX-PA25ALE
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
320 Watts
•1
•1
•
•1
•1
350 Watts
•1
•1
•
•1
•1
•1
•
•1
•
•
•
•
•
•
•
•
•
•
•
•1
•
•
•
•
•
•1
•
• Indicates Compatibility
NOTES
1
Requires ANSI O rated lamp and EX39 exclusionary socket. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:LLRPSL-320-350W
©2000 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for applications such as warehousing, assembly, and retail areas.
ELECTRICAL SYSTEM
The LLRPSL is comprised of a single-coil ballast, ignitor, and capacitor for
lamp stabilization.
Ballast – Available in 277V only. A +/-5% line voltage fluctuation results in a
lamp wattage regulation of +/-10%. Operates lamp at a crest factor of 1.50.
Unlike probe start CWA ballasts which rely on a high crest factor to start the
lamp (typically 1.60), the LLRPSL system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The LLRPSL ballast circuit operates the lamp more gently than a
standard CWA circuit. When it is necessary to supply a Quartz restrike
option, use a SCWA system.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and CSA component listed.
ORDERING INFORMATION
Add LLRPSL after voltage in options part of master catalog number.
Add MP after lamp designation for O (open) rated EX39 exclusionary lamp
socket.
Example: THP 400MP A17 277 LLRPSL
Pulse Start H.I.D. Lighting
LLRPSL
Linear Reactor
Metal Halide Ballast Option
400 Watts
450 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
Input
Watts
Power
Factor
400 LLRPSL
Linear Reactor
277 Only
2.10/1.70
200
435
90%
450 LLRPSL
Linear Reactor
277 Only
2.30/1.90
200
485
90%
Regulation Line V=
Lamp Lumens
+5%= +10%
+5%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:LLRPSL-400-450W
OPAC-250
LLRPSL Linear Reactor, 400 & 450 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TX-PA25ALE
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
400 Watts
•
•
•
•
•
450 Watts
•1
•1
•
•1
•1
•
•
•
•
•
•
•1
•1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•1
•
•
•1
• Indicates Compatibility
NOTES
1
Requires ANSI O rated lamp and EX39 exclusionary socket. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:LLRPSL-400-450W
©2002 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This premium ballast system is comprised of a three-coil isolated winding
ballast, ignitor and capacitor for lamp stabilization. The ballast is
constructed of high-quality silicon steel, which improves ballast efficiency.
Dedicated metal halide lamps for use on the RLB system have been
optimized to take full advantage of the operating parameters of the ballast.
The system is ideal for heavy industrial applications with three-shift
operation and where line dip and brownout tolerance is a must.
ELECTRICAL SYSTEM
Ballast – Available in 120V, 208V, 240V, 277V and 480V. In Canada, available in
120, 277 and 347V. For other voltages, consult factory. A +/-10% line voltage
fluctuation results in a lamp wattage regulation of +/-10%. Operates lamp at
a crest factor of 1.60. The SCWA system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The SCWA ballast circuit operates the lamp more gently than a
standard CWA circuit.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and Canadian Component listed.
ORDERING INFORMATION
Add RLB after voltage in options part of master catalog number.
Add MP optical lamp designation for O (open) rated EX39 exclusionary lamp
socket.
Example: THP 175MP A17 120 RLB
Pulse Start H.I.D. Lighting
RLB
Regulated Lag Ballast
Metal Halide Ballast Option
175 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
175 RLB
Regulated
Lag Ballast
Primary
Voltage
120
277
347
480
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
1.00/2.00
0.43/0.87
0.35/0.69
1.10/1.75
84
195
243
125
Input
Watts
Power
Factor
220
90%
Regulation Line V=
Lamp Lumens
+10%=+4%,-6%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:RLB-175W
OPAC-340
RLB Super Constant Wattage Autotransformer, 175 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TX-PA25ALE
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
175 Watts
•
•
•
•
•
•
•
•
•
•
•
• Indicates Compatibility
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:RLB-175W
©2000 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labross, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This premium ballast system is comprised of a three-coil isolated winding
ballast, ignitor and capacitor for lamp stabilization. The ballast is
constructed of high-quality silicon steel, which improves ballast efficiency.
Dedicated metal halide lamps for use on the RLB system have been
optimized to take full advantage of the operating parameters of the ballast.
The system is ideal for heavy industrial applications with three-shift
operation and where line dip and brownout tolerance is a must.
ELECTRICAL SYSTEM
Ballast – Available in 120V, 208V, 240V, 277V and 480V. In Canada, available in
120 and 277V. For other voltages, consult factory. A +/-10% line voltage
fluctuation results in a lamp wattage regulation of +/-10%. Operates lamp at
a crest factor of 1.60. The SCWA system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The SCWA ballast circuit operates the lamp more gently than a
standard CWA circuit.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and Canadian Component listed.
ORDERING INFORMATION
Add RLB after voltage in options part of master catalog number.
Add MP optical lamp designation for O (open) rated EX39 exclusionary lamp
socket.
Example: THP 200MP A17 120 RLB
Pulse Start H.I.D. Lighting
RLB
Regulated Lag Ballast
Metal Halide Ballast Option
200 Watts
250 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
200 RLB
Regulated
Lag Ballast
277
0.60/0.90
138
244
90%
+10%=+4%,-5%
250 RLB
Regulated
Lag Ballast
120
240
277
347
480
1.00/2.76
0.50/1.38
0.43/1.19
0.35/0.95
0.25/0.69
84
130
195
336
243
298
90%
+10%=+5%,-7%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:RLB-200-250W
OPAC-350
RLB Super Constant Wattage Autotransformer, 200 & 250 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
200 Watts
•1
•1
•
•1
•1
•1
•1
•
•
•
•
•
•
•
•
•
•1
•
•1
•
250 Watts
•1
•1
•
•1
•1
•1
•1
•
•
•
•
•
•
•
•
•
•1
•
•1
•
• Indicates Compatibility
NOTES
1
Requires double jacketed lamp. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:RLB-200-250W
©2000 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This premium ballast system is comprised of a three-coil isolated winding
ballast, ignitor and capacitor for lamp stabilization. The ballast is
constructed of high-quality silicon steel, which improves ballast efficiency.
Dedicated metal halide lamps for use on the RLB system have been
optimized to take full advantage of the operating parameters of the ballast.
The system is ideal for heavy industrial applications with three-shift
operation and where line dip and brownout tolerance is a must.
ELECTRICAL SYSTEM
Ballast – Available in 120V, 208V, 240V, 277V and 480V. In Canada, available in
120, 277 and 347V. For other voltages, consult factory. A +/-10% line voltage
fluctuation results in a lamp wattage regulation of +/-10%. Operates lamp at
a crest factor of 1.60. The SCWA system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The SCWA ballast circuit operates the lamp more gently than a
standard CWA circuit.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and Canadian Component listed.
ORDERING INFORMATION
Add RLB after voltage in options part of master catalog number.
Add MP optical lamp designation for O (open) rated EX39 exclusionary lamp
socket.
Example: THP 400MP A17 120 RLB
Pulse Start H.I.D. Lighting
RLB
Regulated Lag Ballast
Metal Halide Ballast Option
400 Watts
450 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
400 RLB
Regulated
Lag Ballast
120
208
240
277
347
480
1.85/3.95
1.10/2.30
0.95/2.00
0.70/1.72
0.55/1.35
0.40/1.00
65
113
130
150
185
250
450 RLB
Regulated
Lag Ballast
277
0.70/2.00
110
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
467
90%
+10%=+7%
530
90%
+10%=+3%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:RLB-400-450W
OPAC-360
RLB Super Constant Wattage Autotransformer, 400 & 450 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
THC/A15
THS/A16
THS/A16GL
THP/A17
THV/A14
THR/PA16
THR/PA22
TE/E17
TE/E22
TXC/A23
TXS/A30
TXP/A26
TXL/A20
TXR/PA22C
TXR/PA22GLE
TXR/PA25D
TXR/PA25ALE
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
400 Watts
•
•
•
•
•
450 Watts
•1
•1
•
•1
•1
•
•
•
•
•
•
•1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•1
•
•1
•
• Indicates Compatibility
NOTES
1
Requires double jacketed lamp. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:RLB-400-450W
©2000 Acuity Lighting Group, Inc. 5/03
rlb-400-450w.p65
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 1100 50th Ave., Lachine, Quebec H8T 2V3
www.lithonia.com
Catalog
CatalogNumber
Number
FEATURES
The SCWA is comprised of a two-coil ballast, ignitor and capacitor
for lamp stabilization. This high power factor system (+90%) is
designed to optimize energy savings while providing good lamp
regulation. This new lamp/ballast combination reduces input watts
and increases lamp lumens and lamp life. Ideal opportunities exist
for industrial or commercial applications such as warehousing,
assembly areas, retail establishments and recreational facilities.
BALLAST / LAMP SYSTEM
• Available in 120V, 208V, 240V, 277V, 347V and 480V. In Canada,
available in 120V, 277V and 347V. For other voltages, consult
factory.
• Good lamp regulation. A +/-10% line voltage fluctuation results in
a lamp wattage regulation of +/-10% for 175W and +/-6% for 150W.
• Operates lamps at a crest factor of 1.60. Unlike probe start CWA
ballasts which rely on a high crest factor to start the lamp
(typically 1.8), the SCWA system uses a pulse ignitor. Because
the lamp current is closer to a true sine wave, less stress is
placed on the arc tube electrodes, resulting in smoother lamp
operation.
• Hot restrike times of less than 4 minutes. Because the starting
of the lamp is accomplished through a pulse ignitor, the normal
cooldown period before re-ignition has been substantially reduced.
• Consistent color over lamp life. The SCWA ballast circuit operates the lamp more gently than a standard CWA circuit. A lower
number of starts over life results in less blackening of the arc
tube wall.
• No “End of Life” cycling. This phenomenon, a characteristic of
high pressure sodium lamps, does not occur in Metal Halide. This
makes it easy to identify lamps in need of replacement.
• Listing. UL Listed and CSA component listed.
Type
Notes
Type
Pulse Start HID Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
150 Watts
175 Watts
ORDERING INFORMATION
•
Add SCWA after voltage in options part of master catalog
number.
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
150 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
1.40/1.70
0.80/1.00
0.70/0.85
0.60/0.75
0.30/0.62
0.25/0.40
60
104
120
138
260
190
175 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
1.00/1.90
0.60/1.05
0.50/0.95
0.45/0.80
0.35/0.65
0.25/0.50
70
120
140
160
200
280
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
190
90%
+10%= +6%
208
90%
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences
between laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current
available data and are subject to change without notice.
SCWA
SCWA Super Constant Wattage Autotransformer, 150W & 175W
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
THC/A15
THS/A16
THS/A16GL
THP/A17
THV/A14
THR/PA16
THR/PA22
TE/E17
TE/E22
TXC/A23
TXS/A30
TXP/A26
TXL/A20
TXR/PA22C
TXR/PA22GLE
TXR/PA25D
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
OUTDOOR
150 Watts
•1
•1
•
•1
•1
•1
•1
•
•
•
•
•
•
•
•
•
•1
•
•1
•
•
•
•
175 Watts
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SERIES
KVE2
KVR2
KVS1
PGR
KPS
BV2
KSE1
KSF1
KAD
KAC
KACM
KAR1
KKS
KKR
KFL2
TFR
TFL
TFM
TWH
TWP
VV
REFLECTOR
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
150 Watts 175 Watts
•2
•2
•
•2
•
•
•
•2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Indicates Compatibility
NOTES
1 Requires double-jacketed lamp. Consult factory.
2 Available in vertical optics only.
ATTENTION: Not all pulse start lamps are suitable for operation in open opticals. Please refer to lamp manufacturers
data for lamp operation parameters. Please match lamp and ballast ANSI Codes for system compatibility.
SCWA
©2000 Lithonia Lighting 8/00
SCWA.p65
ONE LITHONIA WAY, CONYERS, GEORGIA 30012, PHONE 770-922-9000
Catalog
CatalogNumber
Number
FEATURES
The SCWA is comprised of a two-coil ballast, ignitor and capacitor
for lamp stabilization. This high power factor system (+90%) is
designed to optimize energy savings while providing good lamp
regulation. This new lamp/ballast combination reduces input
watts and increases lamp lumens and lamp life. Ideal opportunities exist for industrial or commercial applications such as
warehousing, assembly areas, retail establishments and recreational facilities.
BALLAST / LAMP SYSTEM
• Available in 120V, 208V, 240V, 277V, 347V and 480V. In Canada,
available in 120V, 277V and 347V. For other voltages, consult
factory.
• Good lamp regulation. A +/-10% line voltage fluctuation
results in a lamp wattage regulation of +/-10%.
• Operates lamps at a crest factor of 1.60. Unlike probe start
CWA ballasts which rely on a high crest factor to start the
lamp (typically 1.8), the SCWA system uses a pulse ignitor.
Because the lamp current is closer to a true sine wave, less
stress is placed on the arc tube electrodes, resulting in
smoother lamp operation.
• Hot restrike times of less than 4 minutes. Because the starting
of the lamp is accomplished through a pulse ignitor, the
normal cooldown period before re-ignition has been substantially reduced.
• Consistent color over lamp life. The SCWA ballast circuit
operates the lamp more gently than a standard CWA circuit.
A lower number of starts over life results in less blackening
of the arc tube wall.
• No “End of Life” cycling. This phenomenon, a characteristic
of high pressure sodium lamps, does not occur in Metal
Halide. This makes it easy to identify lamps in need of
replacement.
• Listing. UL Listed and CSA component listed.
Type
Notes
Type
Pulse Start HID Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
200 Watts
250 Watts
ORDERING INFORMATION
•
Add SCWA after voltage in options part of master catalog
number.
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
200 SCWA
Super Constant
Wattage
Autotransformer
120
208
240
277
347
480
0.75/2.00
0.40/1.20
0.35/1.00
0.30/0.85
0.25/0.70
0.35/0.50
60
104
120
138
174
360
250 SCWA
Super Constant
Wattage
Autotransformer
120
208
240
277
347
480
2.30/2.50
1.30/1.45
1.15/1.25
1.00/1.10
0.50/0.90
0.35/0.60
60
104
120
138
173
240
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
232
90%
+10%= +10%
288
90%
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences
between laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current
available data and are subject to change without notice.
SCWA1
SCWA Super Constant Wattage Autotransformer, 200W & 250W
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
THC/A15
THS/A16
THS/A16GL
THP/A17
THV/A14
THR/PA16
THR/PA22
TE/E17
TE/E22
TXC/A23
TXS/A30
TXP/A26
TXL/A20
TXR/PA22C
TXR/PA22GLE
TXR/PA25D
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
OUTDOOR
200 Watts
•1
•1
•
•1
•1
•1
•1
•
•
•
•
•
•
•
•
•
•1
•
•1
•
•
•
•
250 Watts
•1
•1
•
•1
•1
•1
•1
•
•
•
•
•
•
•
•
•
•1
•
•1
•
SERIES
KVE2
KVR2
KVS1
PGR
BV2
KSE1
KSF1
KAD
KAC
KACM
KAR1
KKS
KKR
KQS
KQR
KFL3
TFD
TFG
TFR
TFL
TWH
REFLECTOR
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
200 Watts 250 Watts
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Indicates Compatibility
NOTES
1 Requires double-jacketed lamp. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open opticals. Please refer to lamp manufacturers
data for lamp operation parameters. Please match lamp and ballast ANSI Codes for system compatibility.
SCWA1
©2000 Lithonia Lighting 8/00
SCWA1.p65
ONE LITHONIA WAY, CONYERS, GEORGIA 30012, PHONE 770-922-9000
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy
savings while providing good lamp regulation. This new lamp/ballast
combination increases lamp lumens and lamp life. Ideal opportunities exist
for industrial applications such as demanding environments, heavy
manufacturing, warehousing and assembly areas.
Pulse Start HID Lighting
SCWA
ELECTRICAL SYSTEM
The SCWA is comprised of a two-coil ballast, ignitor and capacitor for
lamp stabilization.
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
1000 Watts
Ballast - Available in 120V, 208V, 240V, 277V and 480V. In Canada, available
in 120V, 277V and 347V. For other voltages, consult factory. A +/-10% line
voltage fluctuation results in a lamp wattage regulation of +/-12.5%.
Operates lamps at a crest factor of 1.60. Unlike probe start CWA ballasts
which rely on a high crest factor to start the lamp (typically 1.80), the SCWA
system uses a pulse ignitor. Because the lamp current is closer to a true
sine wave, less stress is placed on the arc tube electrodes, resulting in
smoother lamp operation. Consistent color over lamp life. The SCWA
ballast circuit operates the lamp more gently than a standard CWA circuit.
Lamp - Fifty percent faster hot restrike times of less than 7-10 minutes.
Because the starting of the lamp is accomplished through a pulse ignitor,
the normal cool down period before re-ignition has been substantially
reduced. No “End of Life” cycling. This phenomenon, a characteristic of
high pressure sodium lamps, does not occur in Metal Halide. This makes it
easy to identify lamps in need of replacement.
LISTING
UL Listed and CSA component listed.
ORDERING INFORMATION
Add SCWA after voltage in options part of master catalog number.
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
1000 SCWA
Super Constant
Wattage Autotransformer
Primary
Voltage
120
208
240
277
347
480
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
7.80/9.00
4.00/5.20
3.70/4.50
3.20/3.90
2.50/3.20
1.65/2.35
84
146
168
194
230
275
Input
Watts
1080
Power
Factor
Regulation Line V=
Lamp Watts
90%
+10%= +12.5%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:SCWA-1000W
OPAC-330
SCWA Super Constant Wattage Autotransformer, 1000 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TPG/PG16
TPGE/PG16GLE
TPGE/PG16/AGLE
TPG/PG21
TPGE/PG21GLE
TPGE/PG21/AGLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
1000 Watts
•1,2
•1,2
• 1,2
• Indicates Compatibility
NOTES
1 Requires a reduced-jacket lamp. Consult factory.
2 Maximum operating temperature 55OC.
ATTENTION: Not all pulse start lamps are suitable for operation in open opticals. Please refer to lamp manufacturers
data for lamp operation parameters. Please match lamp and ballast ANSI Codes for system compatibility.
Lithonia Lighting
Sheet#:SCWA-1000W
©2001 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for low mounting applications such as general manufacturing, assembly, and retail areas.
ELECTRICAL SYSTEM
The SCWA is comprised of a two-coil ballast, ignitor, and capacitor for lamp
stabilization.
Ballast – Available in 120V, 208V, 240V, 277V and 480V. In Canada, available in
120 and 277V. For other voltages, consult factory. A +/-10% line voltage
fluctuation results in a lamp wattage regulation of +/-10%. Operates lamp at
a crest factor of 1.60. The SCWA system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The SCWA ballast circuit operates the lamp more gently than a
standard CWA circuit.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and Canadian Component listed.
ORDERING INFORMATION
Add SCWA after voltage in options part of master catalog number.
Add MP after lamp designation for O (open) rated EX39 exclusionary lamp
socket. (175 only)
Example: THP 150MP A17 TB SCWA
Pulse Start H.I.D. Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
150 Watts
175 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
150 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
1.40/1.70
0.80/1.00
0.70/0.85
0.60/0.75
0.30/0.62
0.25/0.40
60
104
120
138
260
190
175 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
1.00/1.90
0.60/1.05
0.50/0.95
0.45/0.80
0.35/0.65
0.25/0.50
70
120
140
160
200
280
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
190
90%
+10%= +6%
208
90%
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:SCWA-150-175W
OPAC-260
SCWA Super Constant Wattage Autotransformer, 150 & 175 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TX-PA25ALE
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
150 Watts
•1
•1
•
•1
•1
•1
•1
•
175 Watts
•
•
•
•
•
•
•
•
•1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• Indicates Compatibility
NOTES
1 Requires ANSI O rated lamp and EX39 exclusionary socket. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:SCWA-150-175W
©2000 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog
CatalogNumber
Number
Type
FEATURES
The SCWA is comprised of a two-coil ballast, ignitor and capacitor
for lamp stabilization. This high power factor system (+90%) is
designed to optimize energy savings while providing good lamp
regulation. This new lamp/ballast combination reduces input
watts and increases lamp lumens and lamp life. Ideal opportunities exist for industrial or commercial applications such as
warehousing, assembly areas, retail establishments and recreational facilities.
BALLAST / LAMP SYSTEM
• Available in 120V, 208V, 240V, 277V, 347V and 480V. In Canada,
available in 120V, 277V and 347V. For other voltages, consult
factory.
• Good lamp regulation. A +/-10% line voltage fluctuation
results in a lamp wattage regulation of +/-10%.
• Operates lamps at a crest factor of 1.60. Unlike probe start
CWA ballasts which rely on a high crest factor to start the lamp
(typically 1.8), the SCWA system uses a pulse ignitor. Because the lamp current is closer to a true sine wave, less
stress is placed on the arc tube electrodes, resulting in
smoother lamp operation.
• Hot restrike times of less than 4 minutes. Because the starting
of the lamp is accomplished through a pulse ignitor, the
normal cooldown period before re-ignition has been substantially reduced.
• Consistent color over lamp life. The SCWA ballast circuit
operates the lamp more gently than a standard CWA circuit.
A lower number of starts over life results in less blackening
of the arc tube wall.
• No “End of Life” cycling. This phenomenon, a characteristic
of high pressure sodium lamps, does not occur in Metal
Halide. This makes it easy to identify lamps in need of
replacement.
• Listing. UL Listed and CSA component listed.
Notes
Type
Pulse Start HID Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
320 Watts
350 Watts
ORDERING INFORMATION
•
Add SCWA after voltage in options part of master catalog
number.
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
320 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
2.60/3.25
1.50/1.90
1.30/1.65
1.15/1.40
0.85/1.15
0.60/0.80
80
104
120
138
173
240
350 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
3.20/3.60
1.85/2.10
1.60/1.80
1.40/1.55
1.10/1.25
0.80/0.90
70
120
140
160
200
325
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
370
90%
+10%= +10%
400
90%
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences
between laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current
available data and are subject to change without notice.
SCWA2
SCWA Super Constant Wattage Autotransformer, 320W & 350W
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
THC/A15
THS/A16
THS/A16GL
THP/A17
THV/A14
THR/PA16
THR/PA22
TE/E17
TE/E22
TXC/A23
TXS/A30
TXP/A26
TXL/A20
TXR/PA22C
TXR/PA22GLE
TXR/PA25D
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
OUTDOOR
320 Watts
•1
•1
•
•1
•1
•1
•1
•
•
•
•
•
350 Watts
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•1
•
•1
•
•
•
•
•
•
•
•
SERIES
KVE2
KVR2
KVS3
BV2
KSE2
KSF2
KAD
KAC
KACM
KAR2
KKS
KKR
KQS
KQR
KFL3
TFA
TFD
TFG
TFR
TFL
55, 55V
170S
TWH
THT
REFLECTOR
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
320 Watts 350 Watts
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•2
•2
•
•
•
•
•
•
•
•
• Indicates Compatibility
NOTES
1 Requires double-jacketed lamp. Consult factory.
2 Available in RA2 optics only.
ATTENTION: Not all pulse start lamps are suitable for operation in open opticals. Please refer to lamp manufacturers
data for lamp operation parameters. Please match lamp and ballast ANSI Codes for system compatibility.
SCWA2
©2000 Lithonia Lighting 8/00
SCWA2.p65
ONE LITHONIA WAY, CONYERS, GEORGIA 30012, PHONE 770-922-9000
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for low mounting applications such as general manufacturing, assembly, and retail areas.
ELECTRICAL SYSTEM
The SCWA is comprised of a two-coil ballast, ignitor, and capacitor for lamp
stabilization.
Ballast – Available in 120V, 208V, 240V, 277V and 480V. In Canada, available in
120 and 277V. For other voltages, consult factory. A +/-10% line voltage
fluctuation results in a lamp wattage regulation of +/-10%. Operates lamp at
a crest factor of 1.60. The SCWA system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The SCWA ballast circuit operates the lamp more gently than a
standard CWA circuit.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and Canadian Component listed.
ORDERING INFORMATION
Add SCWA after voltage in options part of master catalog number.
Add MP after lamp designation for O (open) rated EX39 exclusionary lamp
socket.
Example: THP 200MP A17 SCWA
Pulse Start H.I.D. Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
200 Watts
250 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
200 SCWA
Super Constant
Wattage
Autotransformer
120
208
240
277
347
480
0.75/2.00
0.40/1.20
0.35/1.00
0.30/0.85
0.25/0.70
0.35/0.50
60
104
120
138
174
360
250 SCWA
Super Constant
Wattage
Autotransformer
120
208
240
277
347
480
2.30/2.50
1.30/1.45
1.15/1.25
1.00/1.10
0.50/0.90
0.35/0.60
60
104
120
138
173
240
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
232
90%
+10%= +10%
288
90%
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:SCWA-200-250W
OPAC-270
SCWA Super Constant Wattage Autotransformer, 200 & 250 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TX-PA25ALE
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
200 Watts
•1
•1
•
•1
•1
•1
•1
•
250 Watts
•1
•1
•
•1
•1
•1
•1
•
•
•
•
•
•
•
•
•
•1
•
•
•
•
•
•
•
•
•
•1
•
•
•
•
• Indicates Compatibility
NOTES
1
Requires ANSI O rated lamp and EX39 exclusionary socket. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#: SCWA-200-250W
©2000 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog
CatalogNumber
Number
Type
FEATURES
The SCWA is comprised of a two-coil ballast, ignitor and capacitor
for lamp stabilization. This high power factor system (+90%) is
designed to optimize energy savings while providing good lamp
regulation. This new lamp/ballast combination reduces input
watts and increases lamp lumens and lamp life. Ideal opportunities exist for industrial or commercial applications such as
warehousing, assembly areas, retail establishments and recreational facilities.
BALLAST / LAMP SYSTEM
• Available in 120V, 208V, 240V, 277V, 347V and 480V. In Canada,
available in 120V, 277V and 347V. For other voltages, consult
factory.
• Good lamp regulation. A +/-10% line voltage fluctuation
results in a lamp wattage regulation of +/-10%.
• Operates lamps at a crest factor of 1.60. Unlike probe start
CWA ballasts which rely on a high crest factor to start the lamp
(typically 1.8), the SCWA system uses a pulse ignitor. Because the lamp current is closer to a true sine wave, less
stress is placed on the arc tube electrodes, resulting in
smoother lamp operation.
• Hot restrike times of less than 4 minutes. Because the starting
of the lamp is accomplished through a pulse ignitor, the
normal cooldown period before re-ignition has been substantially reduced.
• Consistent color over lamp life. The SCWA ballast circuit
operates the lamp more gently than a standard CWA circuit.
A lower number of starts over life results in less blackening
of the arc tube wall.
• No “End of Life” cycling. This phenomenon, a characteristic
of high pressure sodium lamps, does not occur in Metal
Halide. This makes it easy to identify lamps in need of
replacement.
• Listing. UL Listed and CSA component listed.
Notes
Type
Pulse Start HID Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
400 Watts
450 Watts
ORDERING INFORMATION
•
Add SCWA after voltage in options part of master catalog
number.
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
400 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
3.50/4.00
2.00/2.30
1.75/2.00
1.50/1.75
1.20/1.40
0.90/1.00
60
104
120
138
174
240
450 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
4.20/4.50
2.40/2.60
2.10/2.25
1.80/2.00
1.45/1.60
1.00/1.10
75
130
150
170
220
270
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
455
90%
+10%= +10%
514
90%
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences
between laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current
available data and are subject to change without notice.
SCWA3
SCWA Super Constant Wattage Autotransformer, 400W & 450W
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
THC/A15
THS/A16
THS/A16GL
THP/A17
THV/A14
THR/PA16
THR/PA22
TE/E17
TE/E22
TXC/A23
TXS/A30
TXP/A26
TXL/A20
TXR/PA22C
TXR/PA22GLE
TXR/PA25D
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
OUTDOOR
400 Watts
•
•
•
•
•
450 Watts
•1
•1
•
•1
•1
•
•
•
•
•
•
•1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•1
•
•1
•
• Indicates Compatibility
SERIES
KVE2
KVR2
KVS3
BV2
KSE2
KSF2
KAD
KAC
KACM
KAR2
KKS
KKR
KQS
KQR
KFL3
TFA
TFD
TFG
TFR
TFL
55, 55V
170S
TWH
TSP
TV
THT
REFLECTOR
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
400 Watts 450 Watts
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•2
•
•
•
•
•
•
NOTES
1 Requires double-jacketed lamp. Consult factory.
2 Available in RA2 optics only.
ATTENTION: Not all pulse start lamps are suitable for operation in open opticals. Please refer to lamp manufacturers
data for lamp operation parameters. Please match lamp and ballast ANSI Codes for system compatibility.
SCWA3
©2000 Lithonia Lighting 8/00
SCWA3.p65
ONE LITHONIA WAY, CONYERS, GEORGIA 30012, PHONE 770-922-9000
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for low mounting applications such as general manufacturing, assembly, and retail areas.
ELECTRICAL SYSTEM
The SCWA is comprised of a two-coil ballast, ignitor, and capacitor for lamp
stabilization.
Ballast – Available in 120V, 208V, 240V, 277V and 480V. In Canada, available in
120 and 277V. For other voltages, consult factory. A +/-10% line voltage
fluctuation results in a lamp wattage regulation of +/-10%. Operates lamp at
a crest factor of 1.60. The SCWA system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The SCWA ballast circuit operates the lamp more gently than a
standard CWA circuit.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and Canadian Component listed.
ORDERING INFORMATION
Add SCWA after voltage in options part of master catalog number.
Add MP after lamp designation for O rated EX39 exclusionary lamp socket.
Pulse Start H.I.D. Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
300 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
300 SCWA
Super Constant
Wattage
Autotransformer
Primary
Voltage
120
208
240
277
480
Line Current
(Amps)
Start/Operating
1.30/2.80
0.80/1.65
0.65/1.40
0.55/1.25
0.50/0.75
Primary
Dropout
Voltage
60
105
120
140
270
Input
Watts
342
342
342
342
345
Power
Factor
90%
Regulation Line V=
Lamp Watts
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and are
subject to change without notice.
Indoor H.I.D.
Sheet#:SCWA-300W
OPAC-280
SCWA Super Constant Wattage Autotransformer, 300 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A22
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25 ALE
TX-PA25D
TPG/PG16
TPG/PG16A
TPGE/PG16GLE
TPGE/PG16AGLE
TPG/PG21
TPG/PG21A
TPGE/PG21GLE
TPGE/PG21AGLE
TX-PA25ALEF
TX-A30F
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Open
Enclosed
Enclosed
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
300 Watts
•1
•1
•
•1
•1
•1
•
•
•
•
•
•
•
•
•1
•1
•
•
•
•
• Indicates Compatibility
NOTES
1
Requires ANSI O rated lamp and EX39 exclusionary socket. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:SCWA-300W
©2002 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for low mounting applications such as general manufacturing, assembly, and retail areas.
ELECTRICAL SYSTEM
The SCWA is comprised of a two-coil ballast, ignitor, and capacitor for lamp
stabilization.
Ballast – Available in 120V, 208V, 240V, 277V and 480V. In Canada, available in
120 and 277V. For other voltages, consult factory. A +/-10% line voltage
fluctuation results in a lamp wattage regulation of +/-10%. Operates lamp at
a crest factor of 1.60. The SCWA system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The SCWA ballast circuit operates the lamp more gently than a
standard CWA circuit.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and Canadian Component listed.
ORDERING INFORMATION
Add SCWA after voltage in options part of master catalog number.
Add MP after lamp designation for O (open) rated EX39 exclusionary lamp
socket.
Examplee: TH 320MP A17 TB SCWA
Pulse Start H.I.D. Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
320 Watts
350 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
320 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
2.60/3.25
1.50/1.90
1.30/1.65
1.15/1.40
0.85/1.15
0.60/0.80
80
104
120
138
173
240
350 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
3.20/3.60
1.85/2.10
1.60/1.80
1.40/1.55
1.10/1.25
0.80/0.90
70
120
140
160
200
325
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
370
90%
+10%= +10%
400
90%
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:SCWA-320-350W
OPAC-290
SCWA Super Constant Wattage Autotransformer, 320 & 350 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TX-PA25ALE
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
320 Watts
•1
•1
•
•1
•1
350 Watts
•1
•1
•
•1
•1
•1
•
•1
•
•
•
•
•
•
•
•
•
•
•
•1
•
•
•
•
•
•1
•
• Indicates Compatibility
NOTES
1 Requires ANSI O rated lamp and EX39 exclusionary socket. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:SCWA-320-350W
©2000 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for low mounting applications such as general manufacturing, assembly, and retail areas.
ELECTRICAL SYSTEM
The SCWA is comprised of a two-coil ballast, ignitor, and capacitor for lamp
stabilization.
Ballast – Available in 120V, 208V, 240V, 277V and 480V. In Canada, available in
120 and 277V. For other voltages, consult factory. A +/-10% line voltage
fluctuation results in a lamp wattage regulation of +/-10%. Operates lamp at
a crest factor of 1.60. The SCWA system uses a pulse ignitor. Because the
lamp current is closer to a true sine wave, less stress is placed on the arc
tube electrodes, resulting in smoother lamp operation. Consistent color over
lamp life. The SCWA ballast circuit operates the lamp more gently than a
standard CWA circuit.
Lamp – Hot restrike times of less than 4-6 minutes. Because the starting of the
lamp is accomplished through a pulse ignitor, the normal cool-down period
before re-ignition has been substantially reduced.
LISTING
UL Listed and Canadian Component listed.
ORDERING INFORMATION
Add SCWA after voltage in options part of master catalog number.
Add MP after lamp designation for O (open) rated EX39 exclusionary lamp
socket.
Example: THP 450MP A17 TB SCWA
Pulse Start H.I.D. Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
400 Watts
450 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
Primary
Voltage
Line Current
(Amps)
Start/Operating
Primary
Dropout
Voltage
400 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
3.50/4.00
2.00/2.30
1.75/2.00
1.50/1.75
1.20/1.40
0.90/1.00
60
104
120
138
174
240
450 SCWA
Super Constant
Wattage Autotransformer
120
208
240
277
347
480
4.20/4.50
2.40/2.60
2.10/2.25
1.80/2.00
1.45/1.60
1.00/1.10
75
130
150
170
220
270
Input
Watts
Power
Factor
Regulation Line V=
Lamp Lumens
455
90%
+10%= +10%
514
90%
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and
are subject to change without notice.
Indoor H.I.D.
Sheet#:SCWA-400-450W
OPAC-300
SCWA Super Constant Wattage Autotransformer, 400 & 450 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA22C
TX-PA22GLE
TX-PA25D
TX-PA25ALE
TPG/PG16
TPGE/PG16GLE
TPG/PG21
TPGE/PG21GLE
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Enclosed
Open
Enclosed
Enclosed
Enclosed
Enclosed
400 Watts
•
•
•
•
•
450 Watts
•1
•1
•
•1
•1
•
•
•
•
•
•
•1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•1
•
•1
•
• Indicates Compatibility
NOTES
1
Requires ANSI O rated lamp and EX39 exclusionary socket. Consult factory.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:SCWA-400-450W
©2000 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for industrial
applications such as demanding environments, heavy manufacturing,
warehousing, and assembly areas.
ELECTRICAL SYSTEM
The SCWA is comprised of a two-coil ballast, ignitor, and capacitor for lamp
stabilization.
Ballast – Available in 120V, 208V, 240V, 277V and 480V. In Canada, available in
120V, 277V, and 347V. For other voltages, consult factory. A +/-10% line
voltage fluctuation results in a lamp wattage regulation of +/-10%. Operates
lamp at a crest factor of 1.60. Unlike probe start CWA ballasts which rely on
a high crest factor to start the lamp (typically 1.80), the SCWA system uses a
pulse ignitor. Because the lamp current is closer to a true sine wave, less
stress is placed on the arc tube electrodes, resulting in smoother lamp
operation. Consistent color over lamp life. The SCWA ballast circuit operates
the lamp more gently than a standard CWA circuit.
Lamp – Hot restrike times of less than 7-10 minutes. Because the starting of
the lamp is accomplished through a pulse ignitor, the normal cool-down
period before re-ignition has been substantially reduced.
LISTING
UL Listed and CSA compenent listed.
ORDERING INFORMATION
Add SCWA after voltage in options part of master catalog number.
Pulse Start H.I.D. Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
750 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
750 SCWA
Super Constant
Wattage
Autotransformer
Primary
Voltage
120
208
240
277
347
480
Line Current
(Amps)
Start/Operating
5.60/7.00
3.30/4.00
2.80/3.50
2.20/3.00
1.70/2.45
1.25/1.75
Primary
Dropout
Voltage
60
104
120
138
174
240
Input
Watts
818
Power
Factor
90%
Regulation Line V=
Lamp Watts
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and are
subject to change without notice.
Indoor H.I.D.
Sheet#:SCWA750W
OPAC-310
SCWA Super Constant Wattage Autotransformer, 750 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A22
TH-A14
TH-PA16
TH-PA22
TH-PA25
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA25ALE
TX-PA22C
TX-PA22GLE
TX-PA25D
TPG/PG16
TPG/PG16A
TPGE/PG16GLE
TPGE/PG16AGLE
TPG/PG21
TPG/PG 21A
TPGE/PG21GLE
TPGE/PG21AGLE
TX-A30F
TX-PA25ALEF
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Open
Enclosed
Enclosed
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
750 Watts
•1
•1
•1
• Indicates Compatibility
NOTES
1
Maximum operating ambient temperature 55OC.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:SCWA750W
©2002 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
This high power factor system (+90%) is designed to optimize energy savings
while providing good lamp regulation. This new lamp/ballast combination
increases lamp lumens and lamp life. Ideal opportunities exist for industrial
applications such as demanding environments, heavy manufacturing,
warehousing, and assembly areas.
ELECTRICAL SYSTEM
The SCWA is comprised of a two-coil ballast, ignitor, and capacitor for lamp
stabilization.
Ballast – Available in 120V, 208V, 240V, and 277V. For other voltages, consult
factory. A +/-10% line voltage fluctuation results in a lamp wattage regulation
of +/-10%. Operates lamp at a crest factor of 1.60. Unlike probe start CWA
ballasts which rely on a high crest factor to start the lamp (typically 1.80), the
SCWA system uses a pulse ignitor. Because the lamp current is closer to a
true sine wave, less stress is placed on the arc tube electrodes, resulting in
smoother lamp operation. Consistent color over lamp life. The SCWA ballast
circuit operates the lamp more gently than a standard CWA circuit.
Lamp – Hot restrike times of less than 12 minutes.
LISTING
UL Listed.
ORDERING INFORMATION
Add SCWA after voltage in options part of master catalog number.
Pulse Start H.I.D. Lighting
SCWA
Super Constant Wattage Autotransformer
Metal Halide Ballast Option
875 Watts
ELECTRICAL CHARACTERISTICS
Wattage/
Ballast
875 SCWA
Super Constant
Wattage
Autotransformer
Primary
Voltage
120
208
240
277
Line Current
(Amps)
Start/Operating
5.30/8.00
3.10/4.50
2.65/4.00
2.30/3.45
Primary
Dropout
Voltage
65
110
130
150
Input
Watts
940
Power
Factor
90%
Regulation Line V=
Lamp Watts
+10%= +10%
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between
laboratory data and actual field measurements. Dimensions and specifications on this sheet are based on the most current available data and are
subject to change without notice.
Indoor H.I.D.
Sheet#:SCWA-875W
OPAC-320
SCWA Super Constant Wattage Autotransformer, 875 Watts
PULSE START BALLAST/FIXTURE COMPATIBILITY
INDOOR
SERIES/OPTICAL
TH-A15
TH-A16
TH-A16GL
TH-A17
TH-A22
TH-A14
TH-PA16
TH-PA22
TE/E17
TE/E22
TX-A23
TX-A30
TX-A26
TX-A20
TX-PA25ALE
TX-PA22C
TX-PA22GLE
TX-PA25D
TPG/PG16
TPG/PG16A
TPGE/PG16GLE
TPGE/PG16AGLE
TPG/PG21
TPG/PG21A
TPGE/PG21GLE
TPGE/PG21AGLE
TX-A30F
TX-PA25ALEF
TG
TGL
TGR
REFLECTOR
Open
Open
Enclosed
Open
Open
Open
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Open
Open
Enclosed
Enclosed
Open
Open
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
Enclosed
875Watts
•1
•1
•1
• Indicates Compatibility
NOTES
1
Maximum operating ambient temperature 55OC.
ATTENTION: Not all pulse start lamps are suitable for operation in open
opticals. Please refer to lamp manufacturers data for lamp operation
parameters. Please match lamp and ballast ANSI Codes for system
compatibility.
Lithonia Lighting
Sheet#:SCWA-875W
©2002 Acuity Lighting Group, Inc. 1/06
Acuity Lighting Group, Inc.
Indoor H.I.D.
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000, 800-315-4963, Fax: 770-602-1531
In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1
www.lithonia.com