Download Data Sheet (current)

Distributed by:
www.Jameco.com ✦ 1-800-831-4242
The content and copyrights of the attached
material are the property of its owner.
Jameco Part Number 1583156
PD2401
AC Solid State Relays
AC Operating
Voltage
Load Current
On-State
Voltage Drop
PD2401
Units
120
1
VRMS
A
VRMS
1.2
(AT IL = IA)
Features
• Load Current up to 1A
• Blocking Voltage to 600V
• 5mA Sensitivity
• Zero-Crossing Detection
• DC Control, AC Output
• Optically Isolated
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
• VDE compatible
• Machine Insertable, Wave Solderable
Description
The PD2401 is an AC Solid State Switch using optical
coupling with dual power SCR outputs to produce an
alternative to optocoupler and Triac circuits. The PD2401
switches are robust enough to provide a blocking voltage
of up to 500V and max surge current rating of 20A. In
addition, tightly controlled zero cross circuitry ensures
switching of AC loads without the generation of transients. The input and output circuits are optically coupled
to provide 3750V of isolation and noise immunity
between control and load circuits. As a result the PD2401
is well suited for industrial environments where electromagnetic interference would disrupt the operation of
electromechanical relays.
Approvals
• UL recognized file #: E69938
• CSA certified file #: LR 43639-8
Ordering Information
Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contractors
• Large Relays
• Solenoids
• Motors
• Heaters
Part #
PD2401
Description
16 Pin DIP (25/Tube)
Pin Configuration
PD2401 Pinout
Ð LED
1
16
+ LED
ZC
10
AC Load
DS-PD2401-R9
www.clare.com
8
AC Load
1
PD2401
Absolute Maximum Ratings (@ 25˚ C)
Parameter
Input Power Dissipation
Input Control Current
Peak (10ms)
Reverse Input Voltage
Total Package Dissipation
PD
Isolation Voltage
Input to Output
Operational Temperature
Storage Temperature
Soldering Temperature
DIP Package
Surface Mount Package
(10 Seconds Max.)
1
Derate Linearly 1.33 mW/˚C
2
Derate Linearly 16.6 mW/˚C
Min
-
Typ Max Units
- 1501 mW
50
mA
1
A
5
V
-
-
16002 mW
3750
-40
-40
-
VRMS
+85
°C
+125 °C
-
-
+260
+220
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
°C
°C
Electrical Characteristics
Parameters
Output Characteristics @ 25°C
Peak Blocking Voltage
Load Current (Continuous)
Off State Leakage Current
On-State Voltage Drop
Critical Rate of Rise
Switching Speeds
Turn-on
Turn-off
Zero-Cross Turn-On Voltage
Operating Frequency1
Load Power Factor for
Guaranteed Turn-On2
Capacitance Input to Output
Input Characteristics @ 25°C
Input Control Current
For Normal Environment
For High Noise Environment
Input Voltage Drop
Input Drop-out Voltage
Reverse Input Current
Common Characteristics @ 25°C
Input to Output Capacitance
Input to Output Isolation
2
1
Zero cross 1st 1/2 cycle @ <100Hz
2
Snubber circuits may be required at low power factors.
Conditions
Symbol
Min
Typ
Max
Units
VL=120-240VAC
VDRM
IL=1A
dv/dt
VDRM
IL
ILEAK
0.005
1000
1200
500
1
1
1.2
-
V
A
mA
VRMS
V/µS
IF=5 mA
IF=5 mA
1st half cycle
Sub. half cycle
-
TON
TOFF
20
2
-
0.5
0.5
5
1
500
Cycles
Cycles
V
V
Hz
-
PF
-
0.25
-
-
-
pF
IF=5mA
VR=5V
IF
IF
VF
IR
5
10
0.9
0.8
-
1.2
-
50
100
1.4
10
mA
mA
V
V
uA
-
CI/O
VI/O
3750
-
3
-
VRMS
VRMS
www.clare.com
Rev. 9
PD2401
PERFORMANCE DATA*
Peak Surge Current (A)
1.0
Load Current (A)
PD2401
Typical Forward Voltage vs. Temperature
PD2401
Max. Surge Current (Non-Repetitive)
0.8
RΘJA = 60°C/W
0.6
0.4
0.2
NOTE: Values apply to
TJ = 50°C before Surge
20
15
10
5
2.0
Forward Voltage (V)
PD2401
Load Current, Free Air
1.2
1.5
1.0
0.5
0
-40
0
55
85
16
Ambient Temperature (°C)
PD2401
Typical dv/dt vs. Temperature
Critical Rate of Rise (V/µs)
50
100
10
25
50
75
100
125
150
Ambient Temperature (°C)
Pulse Duration (ms)
PD2401
dv/dt Method
1200
Vo
1000
800
Vo = 300V
dv 0.63 x 300V
dt
RC
63%
600
189
RC
In accordance with
EIA/NARM Standards
RS-443 for Solid State Relays
400
200
10%
0
25
50
85
RC
Ambient Temperature (°C)
Mechanical Dimensions
16 Pin DIP
6.350 ± .127
(.250 ± .005)
19.202 ± .381
(.756 ± .015)
3.429 TYP.
(.135)
7.620 ± .254
(.300 ± .010)
15.240 TYP.
(.600)
.508 TYP.
(.020)
17.780 TYP.
(.700)
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
Rev. 9
www.clare.com
3
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or
make changes to its products at any time without notice.
Specification: DS-PD2401-R9.0
©Copyright 2002, Clare, Inc.
All rights reserved. Printed in USA.
6/25/02