Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Asynchronous Transfer Mode wikipedia , lookup
Recursive InterNetwork Architecture (RINA) wikipedia , lookup
Distributed firewall wikipedia , lookup
Piggybacking (Internet access) wikipedia , lookup
Cracking of wireless networks wikipedia , lookup
Network tap wikipedia , lookup
Computer network wikipedia , lookup
IEEE 802.1aq wikipedia , lookup
List of wireless community networks by region wikipedia , lookup
Airborne Networking wikipedia , lookup
Multicast Algorithms in Service Overlay Networks Dario Pompili*, Luca Lopez^, Caterina Scoglio+ *[email protected], ^[email protected], [email protected] *Broadband and Wireless Networking Laboratory Georgia Institute of Technology, Atlanta, GA 30332, USA ^Dipartimento di Informatica e Sistemistica University “La Sapienza,” Rome 00184, Italy +Department of Electrical and Computer Engineering Kansas State University, Manhattan, KS 66506, USA Infocom 2006, April 23-29 1 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 Outline Introduction to Overlay Networks Native Network vs. Virtual Overlay Network Unicast vs. Multicast Transmissions Multicast Applications Proposed Overlay Multicast Algorithms: DIMRO and DIMRO-GS Performance Evaluation Conclusions and Future Work 2 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 Introduction to Overlay Networks Overlay routing enhances IP network reliability and performance by forwarding traffic through intermediate overlay nodes [1-3]. This way: – It can bypass congestion – It can overcome transient outages Past research [4,5] focused on techniques for: – Building overlay networks – Evaluating their performance [1] H. Zhang, J. Kurose, and D. Towsley, “Can an overlay compensate for a careless underlay?” in Proceedings of IEEE INFOCOM 2006, Barcelona, Spain, Apr. 2006 [2] Y. Zhu, C. Dovrolis, and M. Ammar, “Dynamic overlay routing based on available bandwidth estimation: A simulation study,” To appear in the Computer Networks Journal, 2006 [3] S. Y. Shi and J. S. Turner, “Routing in overlay multicast networks,” in Proceedings of IEEE INFOCOM 2002, New York, NY, USA, June 2002 [4] D. Andersen, H. Balakrishnan, M. Kaashoek, and R. Morris, “Resilient overlay networks,” in Proceedings of ACM Symposium on Operating Systems Principles, Banff, Canada, Oct. 2001 [5] A. Nakao, L. Peterson, and A. Bavier, “A routing underlay for overlay networks,” in Proceedings of ACM SIGCOMM, Karlsruhe, Germany, Aug. 2003 3 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 Native Network vs. Virtual Overlay Network We consider two layers of network infrastructure: – The native network, includes end-systems, routers, links, and the associated routing functionality, and provides best-effort datagram delivery between its nodes – The virtual overlay network, formed by a subset of the native layer nodes interconnected through overlay links to provide enhanced services Overlay links are virtual in the sense that they are IP tunnels over the native network 4 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 Unicast vs. Multicast Transmissions Unicast transmissions: – The sender transmits data to a single receiver and, if multiple receivers want the same data content, the sender has to transmit multiple copies of data Multicast transmission: – The sender transmits only one copy of data that is delivered to multiple receivers A challenging objective in multicasting is to minimize the amount of network resources to compute multicast trees 3 copies of the same message Only 1 copy of the message R2 S Unicast 5 R2 S R3 Multicast R3 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 Multicast Applications We present two algorithms to build virtual multicast trees on an overlay network for as many applications as: – Live video, software and file distribution, replicated database, web site replication, videoconference, distributed games, file sharing, periodic delivery Source Specific Group Shared Real-time Live video distribution Videoconference, distributed games Non Realtime Software and file distribution, replicated database, server and web site replication, periodic data delivery (sport scores, magazines, newspapers) 6 File sharing, collaborative groupware, replicated database D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 Proposed Overlay Multicast Algorithms DIMRO: DIstributed Multicast algorithm for Internet Resource Optimization – It builds virtual source rooted multicast trees for source specific applications – It takes the virtual link available bandwidth into account to avoid traffic congestion and fluctuation, which cause low network performance DIMRO-GS: DIstributed Multicast algorithm for Internet Resources Optimization in Group Shared applications – It constructs a virtual shared tree for group shared applications – It connects each member node to all the other member nodes with a source rooted tree computed using DIMRO Both DIMRO and DIMRO-GS algorithms offer service differentiation, i.e., they provide QoS at the application layer without IP-layer support 7 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 DIMRO: Objectives Most of the algorithms in the literature focus on computing multicast trees for real-time applications (delay sensitive) – Bandwidth is often taken into account only as a constraint – Optimization involves only one tree, and not all trees for different multicast groups DIMRO optimizes the overlay network performance when multiple multicast comunications should take place The objective is to exploit the network resource in an efficient way The available bandwidth on each virtual link plays a key role in the multicast tree research 8 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 DIMRO: Motivations If the overlay available bandwidth is not esplicitely taken into account the risk is to: – Overload some link – Leave some other link unexploited Load balancing is NOT achieved if cost does not explicitely take available bandwidth on links into account SA R2A SB R2B R1A Overloaded Link Unexploited Link 9 R3B D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 R1B DIMRO: Steps of the Algorithm 1. Receivers are ordered according to decreasing Step 1 requested bit rates s Step01 0 2. The optimum path between the sender and the Step 3 receiver with the highest requested rate is 0 computed 3. Then, paths connecting other receivers are computed, according to the decreasing order 4. The kth receiver rk is connected to the sender s by using that path p(s,rk) that minimizes the following objective function: auv f p( s, rk ) Buv (buv Fk ) 1 {( u ,v ) p ( s , rk )} uv • • • • • 10 Buv: total bandwidth of virtual link (u,v) buv: available bandwidth of virtual link (u,v) Fk: cumulative rate by the kth receiver rk auv: binary variable that equals 0 if link (u, v) already belongs to the tree, 1 otherwise V and E: number of vertexes and edges in the overlay network uv Buv 0, (u, v) T auv 1, (u, v) T Step 1 0 r1 1024 Kbps Step 2 0 r2 Step 3512 Kbps 0 r3 256 Kbps Buv uv Buv (| V |, | E |, F , B ) D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 DIMRO-GS: the Algorithm DIMRO-GS (Group Shared DIMRO) is the extension of DIMRO to the multicast shared tree case For M group members, the virtual shared tree is set up by building M virtual source rooted trees, each one having a different group member as root and all the other members belonging to the tree Each source rooted tree is built using DIMRO If each group member has the same bandwidth requirement, the first step of DIMRO is skipped When M source rooted trees are computed, the virtual shared tree is completed DIMRO computational complexity: O(M · |V| · |E|) – It builds the virtual multicast tree by computing for as many as M times the spanning tree using the Bellman-Ford algorithm, whose complexity is O(|V| · |E|) DIMRO-GS computational complexity: O(M2 · |V| · |E|) – It runs DIMRO M times 11 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 Simulation Scenario A random overlay network has been generated following the Waxman’s model [6], with parameters (α,β) The bandwidth capacity Buv of each virtual link (u, v) is randomly generated using a uniform distribution with mean B = 100Mbps Two different one hundred node random overlay networks are generated Network 2 has a higher number of links than Network 1 Two metrics are used to compare the competing algorithms, the Rejection Rate and the Network Load α β B nodes Network 1 0.2 0.4 100Mbps 100 Network 2 0.3 0.6 100Mbps 100 Re jection Rate ( u ,v ) # Re jeted Trees # Re quested Trees uv [6] B. M. Waxman, “Routing of multipoint connections,” IEEE Journal on Selected Areas in Communications, vol. 6, no. 9, pp. 1617–1622, Dec. 1988 12 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 DIMRO: Performance Evaluation in Network 1 In Network 1, the DIMRO Rejection Rate is lower than the Rejection Rate of the Optimal solution of the Steiner Tree Problem (OSTP) with cuv= 1 The DIMRO Network Load is the same as the OSTP Network Load until the Rejection Rate is the same. Then, since DIMRO rejects less trees, its Network Load becomes higher than the OSTP one 13 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 DIMRO: Performance Evaluation in Network 2 In Network 2, the DIMRO Rejection Rate is significantly lower than the OSTP Rejection Rate (less unavoidable bottlenecks exist). Since Network 2 has a higher number of links, the number of possible paths between two nodes increases. Thus, it is easier for DIMRO to avoid bottlenecks A lower Network Load with a higher Rejection Rate proves that OSTP does not efficiently use the available network resources 14 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 DIMRO-GS: Performance Evaluation in Network 1 When the Number of Requested Trees increases, the FTM Rejection Rate becomes significantly higher than the one of DIMRO-GS, since FTM uses a higher amount of network resources In fact, when the Number of Requested Trees increases, the FTM Network Load becomes significantly higher than the DIMRO-GS Network Load 15 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 DIMRO-GS: Performance Evaluation in Network 2 Network resources saturate later when DIMRO-GS is used, which causes a lower Rejection Rate In Network 2, DIMRO-GS achieves a lower Rejection Rate and Network Load Note that in Network 1 bottlenecks do not allow efficiently exploiting all available network resources 16 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006 Conclusions and Future Work Two algorithms for multicast applications in service overlay networks were presented The first builds virtual source rooted multicast trees for source specific applications The second constructs a virtual shared tree for group shared applications Their objective is to achieve traffic balancing on the overlay network to avoid traffic congestion and fluctuation, which cause low network performance The algorithms actively probe the underlay network and compute virtual multicast trees by dynamically selecting the least loaded available paths on the overlay network Future research will focus on dynamic multicast groups, and on the interactions between the overlay and the underlay network 17 D. Pompili, L. Lopez, C. Scoglio, Multicast Algorithms in Service Overlay Networks, Infocom 2006