Download MKJT 90 300/500 V (H05V2-K)

MKJT 90 300/500 V (H05V2-K)
Plastic-insulated tinned flexible conductor
RATED VOLTAGE
IDENTIFICATION OF CORES
UO/U = 300/500 V
Yellow-green (YE/GN), black (BK), blue (BU), light blue (LBU)
APPLICATION
STANDARDS
For fixed protected installation where conductors with elevated
temperatures are needed; e.g. inside appliances and in lighting
fittings. General guide to use, EN 50565-2.
EN 50525-2-31
Highest permissible conductor temperature:
• continuous operation
• short circuit (duration up to 5 s)
90 °C
160 °C
CERTIFICATES, APPROVALS
Lowest recommended temperature during laying (3):
-25 °C
Minimum permissible bending radius:
• at final installation if bend only once
Maximum permissible pulling force from
conductor is 50x A N/mm2
CONSTRUCTION
2x D
IEC / EN 60332-1
The cable does not contain any substances on the
REACH/SVHC -list.
All substances of the cable meet the requirements of
RoHS directive.
CUSTOMS CODE
8544 49 95
Conductor Tinned flexible copper wire
Insulation Lead-free heat resistant PVC compound
23.07.2014 © Prysmian Group. All rights reserved.
All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group; any modification or alteration
afterwards of product may give different result.
The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent
of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without notice.
This specification is not contractually valid unless specifically authorised by Prysmian Group.
Jumper wires
MKJT 90 300/500 V (H05V2-K)
PROPERTIES
PRODUCT NAME
MKJT 90
0,75
STK-code and colour, spool
YE/GN
0415668
STK-code and colour, spool
BK
0415673
STK-code and colour, spool
BU
STK-code and colour, spool
LBU
0416107
Spool type and std delivery lenght, spool
P2/500
CONSTRUCTION DATA (1)
Diameter over cable (D)
Weight
mm
2,4
kg/km
12
Ω/km
26,7
ELECTRICAL DATA (2)
Maximum DC resistance, conductor 20°C
CURRENT RATINGS (2)
Installation type: Inside appliances when temperature is 30°C
A
6
(1) Approximate value.
(2) See the basic assumptions at general information of products.
(3) Final installation with careful single bending into final position.
23.07.2014 © Prysmian Group. All rights reserved.
All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group; any
modification or alteration afterwards of product may give different result.
The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in
part, without the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian
Group reserves the right to amend this specification without notice. This specification is not contractually valid unless specifically
authorised by Prysmian Group.