Download 500-775 HCMU Datasheet.indd

POWER
MANAGEMENT_
High Current Management Unit
Moog’s High Current Management Unit (HCMU) is a 28V, high output current, smart power controller. An
extremely efficient power drive design is capable of delivering in excess of 36kW (steady-state) of output power
with greater than 99% unit efficiency. Utilizing Moog’s high-speed Universal Controller Unit (UCU), the HCMU
provides state-of-the-art, user-programmable Electronic Circuit Breakers (ECBs) that offer remote power
switching, configurable over-current and I2t protection, and input/output power monitoring.
HIGH
CURRENT
MANAGEMENT
UNIT_
HIGH
CURRENT
MANAGEMENT
UNIT_
Specifications
M38999, Series III, signal
M5015, power
MIL-C-5541/53072 conversion/CARC coatings
Fully sealed, NBC decontamination
28V per MIL-STD-1275 and MIL-STD-704F
100V surge, 250V spikes
MIL-STD-461E: CE102, CS101, CS114, CS115, CS116, RE102, RS103
MIL-STD-464: Lightning, electrical bonding and grounding, upgradeable for TEMPEST
Nuclear weapons INR/EMP hardening an option
6 configurable power channels of up to 200A each (10A increments)
I/O Connectors
Aluminum Enclosure and Cover
DC Input Voltage
Transient Voltages (single fault)
EMI/EMC/E3
Total unit current-carrying capacity of 1,200A
Individual ECB control and monitoring via dual CAN-Bus
Self-Protection
I2t pulse-handling capability up to 2,400A per channel
Short-circuit protection (“Instant-Trip”)
Thermal memory safety for repeated faults
Electronic Circuit Breakers
Power channel monitoring (measurements accurate to <5%)
Input Voltage
Output Voltage
Load Current
Channel Temperature
Dual CAN-BUS
Optional: RS-485/422, 10/100/1000 Ethernet, RS-232, MIL-STD-1553
PBIT, CBIT, and IBIT
Status reported on CAN-Bus
Communication
Comprehensive Diagnostics & BIT/BITE
Environmental (MIL-STD-810F)
Temperture: Method 501.4
Vibration: Method 514.5
Shock: Method 516.5-8
Humidity: Method 507.4
Salt Fog: Method 509.4
Sand and Dust: Method 510.4
Fungus: Method 508.5
Altitude: Method 500.4
Immersion: Method 512.4
Cleaning
Mechanical data
Envelope
Weight
P-I, storage, Tst = -51˚ C to 85˚ C
P-II, Operation, Top = -40˚ C to 71˚ C
Cat-24, Minimum integrity test vehicle
40 g, 7.5ms
5 cycles, 95% RH
5%, 48 hours
P-I and P-II, 6 hours
28 days
P-I and P-II, 6 hours
P-II, operation
P-III, rapid decompression
P-II, 1m, 1 hour
10 gpm, .25" ø nozzle, 1 ft ┴ to LRU
11" x 14" x 7.5"
~ 40 lbs (18 kg)
Configurable ECB I2t Pulse-Handling Curve
GUI Available for Control
East Aurora, NY 14052 USA
+1.716.652.2000
www.moog.com
© 2 0 11 Moog, Inc. All rights reser ved.
Form 500-775 1111