Download PPE Answers

Personal Protective Equipment Check for Learning
Name: __________________________________
ID: _________________
Date: _______________
1.
Engineering controls should be tried before using PPE.
True or False?
2.
The use of PPE can itself create significant worker hazards, such as heat stress,
physical and psychological stress, and impaired vision, mobility, and
communication.
True or False?
3.
The basic element of any PPE program should be _________________of the
equipment needed to protect against the hazards at the workplace.
a. An in–depth evaluation.
b. An in-depth selection.
c. A hazard analysis.
d. A vendor determination.
4.
Class G helmets are intended to reduce the force of impact resulting from a blow
only to the top of the head.
True or False?
5.
Class G helmets are intended to reduce the danger of contact exposure to high
voltage conductors.
True or False?
6.
Inspect safety helmets daily.
True or False?
7.
It's OK to store helmets on the rear–window shelf of an automobile, but only in the
winter months.
True or False?
8.
OSHA requires eye and face protective equipment where there is a __________
probability of preventable injury when such equipment is used.
a. Slight.
b. Good.
c. Reasonable.
d. 100%.
9.
The combination of normal streetwear frames with safety lenses is allowed.
True or False?
10. Make sure prescription safety spectacles are fitted only by qualified optical
personnel.
True or False?
11. PPE, which has been previously used, should be disinfected before being issued to
another employee.
True or False?
12. Never where earplugs and earmuffs at the same time.
True or False?
13. Rubber is considered the best material for insulating gloves and sleeves.
True or False?