Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Variable-frequency drive wikipedia , lookup
Buck converter wikipedia , lookup
Control system wikipedia , lookup
Switched-mode power supply wikipedia , lookup
Tektronix analog oscilloscopes wikipedia , lookup
Opto-isolator wikipedia , lookup
Wien bridge oscillator wikipedia , lookup
Superheterodyne receiver wikipedia , lookup
Band-Switching Ku-Band Low Noise Block Converter TLNB12000AS.0006 Introduction The TLNB-12000AS band-switching Ku-Band Low Noise Block Converter is specially designed for satellite earth station and other telecommunications applications. Utilizing state-of-the-art HEMT and GaAs FET technology, this block converter has been designed for both fixed and transportable applications. The TLNB-12000AS has the quality, stability, and performance required for demanding receiver applications in today’s diverse satellite communications systems. Features Full Ku-Band coverage via band-switching architecture Low noise temperature High reliability HEMT design Internal 10 MHz TCXO reference Phase-locked oscillator Reverse polarity protection Wide operating temperature range, -40 °C to +70 °C INTELSAT/EUTELSAT compliant phase noise High stability external reference operation with auto-switching circuit Outline Drawing 1.50 [38.1] 0.75 [19.1] 6.75 [171.5] POWER/CONTROL CONNECTOR 0.78 [19.8] PIN A B C D 2.80 [71.1] 0.97 [24.7] NOTES: 1. DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. MATING CONNECTOR FURNISHED PT06E8-4S-476 IF OUT/DC IN/REF IN (TYPE N FEMALE) RF IN (WR 75F) 0.15 [3.8] DIA THRU (4 PLACES) 4-PIN CONNECTOR PT02E8-4P-027 +12 TO + 22 VDC GROUND BSW1 BSW2 POWER/CONTROL 0.74 [18.8] 2. TOLERANCE - ± 0.02 [0.5] 3. PAINT: COLOR TO BE COMMERCIAL WHITE. 2.60 [66.0] 0.48 [12.3] 5.53 [140.5] Outline 19967-28 Specifications Parameter Notes Min. Input Frequency Band 1 Band 2 Band 3 10.70 11.70 12.20 950 Output Frequency Output Spectrum Local Oscillator Frequency* External Reference Internal Reference LO Phase Noise Spurious Gain (Nominal) Gain Flatness Gain Stability Power Output 3rd Order Output Intercept Point Noise Temperature VSWR Connectors Power Requirements Operating Temperature † Nom./Typ. 11.70 12.20 12.75 1950 GHz GHz GHz MHz GHz GHz GHz 10 10 Frequency Set Tolerance @ +23 °C Vs. Temperature 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz Signal related; IF Band Non-signal related; IF Band ±0.25 ±1.0 -60 -70 -80 -90 -100 -60 -70 60 At +23 °C Input (50 ohms) Output (50 ohms) RF Input IF Output/DC In/Ref. In Band Switch/DC In Voltage Current TAMB Units Non-Inverted — 9.75 10.75 11.25 Muted (BSW1=0, BSW2=0) Band 1 (BSW1=0, BSW2=1) Band 2 (BSW1=1, BSW2=0) Band 3 (BSW1=1, BSW2=1) 2.4 V < Logic 1 < 5 V, 0 V < Logic 0 < 0.4V @ 30 µA, typ. Full-band Per 40 MHz Per week, constant temp vs. temp. At 1 dB compression Max. 63 ±1 ±0.30 ±0.5 ±1 +13 +23 +10 +20 +12 -40 65 75 1.20 1.25 1.35 1.50 WR75 Cover Flange Type N Female PT02E8-4P-027 (mate supplied) +22 400 500 +70 MHz MHz ppm ppm dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc dBm dB dB dB dB dB dBm dBm K :1 :1 Vdc mA °C External Reference Requirements: Parameter Frequency Input Level Input Impedance Phase Noise at Offset Frequency Notes Min. -5 Nom.Typ. 10.00 0 50 † 10 Hz 100 Hz 1 kHz 10 kHz Max. +5 -105 -135 -145 -150 Units MHz dBm ohms dBc/Hz dBc/Hz dBc/Hz dBc/Hz † When there is only one value on a line, the Nom./Typ. column is a nominal value; otherwise it is a typical value. Typical values are intended to illustrate typical performance, but are not guaranteed. * BSW1 (Pin C), BSW2 (Pin D) are pulled up to +3.3 Vdc, referenced to Pin B, through 100 kΩ resistors. Caution: To prevent potential equipment damage from water intrusion, which will VOID the warranty, use waterproof cable and apply waterproof tape or heatshrink tubing to protect external connections. 60 Decibel Road, Suite 200 • State College, PA 16801 USA • Tel. 814 238 2700 • FAX 814 238 6589 Email: [email protected] • www.gdsatcom.com/electronics.php © 2015 General Dynamics. All rights reserved. General Dynamics reserves the right to make changes to its products and specifications at any time and without notice. All trademarks indicated as such herein are trademarks of General Dynamics. All other product and service names are the property of their respective owners. 29392 Rev. –