Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Equipment Specifications for Digital PH Meter UNSPSC Code: ECRI Code: 1 Description of Function Sl Name 1.1 A pH meter is an electronic instrument used to measure the pH (acidity or basicity) of a Blood Sample in blood bank. Technical Bidders Specs Deviation quoted if any by bidder 2 Operational Requirements Sl Name 2.1 Portable digital system is required. Technical Bidders Specs Deviation quoted if any by bidder 3 Technical Specifications Sl Name 3.1 pH range should be 0-14 3.2 Milli volt range should be 0-1999+/- mv 3.3 Resolution 0.01 pH 3.4 Repeatability +/- 0.01pH +/- 1 digit 3.5 Standardization range +/- 2 pH 3.6 Temp. compensation 0-100 degree C 3.7 Display 4 digit LED with automatic polarity 3.8 Polarizing current 10 micro ampere 3.9 Dimensions 240x230x115 mm 3.10 Weight approx 2 kg Technical Bidders Specs Deviation quoted if any by bidder 4 System Configuration Accessories, spares and consumables Sl Name 4.1 System as specified- 4.2 Accessories to be supplied –part of glass and reference electrodes, electrode holder 4.3 All consumables required for installation and standardization of system to be given free of cost. Technical Bidders Specs Deviation quoted if any by bidder 4.4 System should be quoted with complete accessories and probes to make it functional as per technical specifications 5 Environmental factors Sl Name 5.1 Shall meet IEC-60601-1-2 :2001(Or Equivalent BIS) General Requirements of Safety for Electromagnetic Compatibility.or should comply with 89/366/EEC; EMC-directive. 5.2 The unit shall be capable of being stored continuously in ambient temperature of 0 -50deg C and relative humidity of 15-90% 5.3 Thu unit shall be capable of operating in ambient temperature of 2030 deg C and relative humidity of 80%. Technical Bidders Specs Deviation quoted if any by bidder 6 Power Supply Sl Name 6.1 Should work on 220-240V AC as well as power supply. Mains adaptor to be supplied. Technical Bidders Specs Deviation quoted if any by bidder 7 Standards and Safety Sl Name 7.1 Should be FDA , CE,UL or BIS approved product 7.2 Protection level should be certified for IP 67 7.3 Should comply with IEC 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements 7.4 Comprehensive warranty for 2 years and 5 years AMC after warranty 7.5 Manufacturer/Supplier should have ISO certification for quality standards. Technical Bidders Specs Deviation quoted if any by bidder 8 Documentation Sl Name 8.1 Certificate of calibration and inspection from factory. 8.2 List of Equipments available for providing calibration and routine Preventive Maintenance Support. as per manufacturer documentation in service/technical manual. 8.3 List of important spare parts and accessories with their part number and costing. Technical Bidders Specs Deviation quoted if any by bidder