Download SB-I/O Surface Mount Backbox

SB-I/O Surface
Mount Backbox
Easy to Install, U.L. listed for Indoor
and Outdoor Applications.
SB-I/O Surface Mount
Back Box
The SB-I/O Surface Mount Back
Box is for use with the PS-SA and
PS-DA models of pull stations. In
addition to being molded out of
increased UV stabilized polycarbonate material (94V-O), the SBI/O‘s mounting holes and bottom
conduit entry are molded with a
thin wall of material to provide
improved outdoor weatherability.
Features:
• UL Listed for indoor and outdoor
applications
• Molded Self-Sealing Mounting
Bosses
• CSFM Listed
• Snap Latches for Easy
Installation of the Pull Station
• Two Reinforced 1/2” NPT
Connector Outlets (One Plug
Included)
• Single-gang Electrical Box
Mounting Holes (Knockout)
• Four #10 x 1.00” Mounting
Screws Included
SB-I/O
Compatibility
The SB-I/O is compatible with the following pull stations:
PS-DA
PS-SA
Pull Station BackBox
SB-I/O shown assembled to Pull Station
(Pull Station Sold Separately)
This document is not intended to be used for installation purposes. We
try to keep our product information up-to-date and accurate. We cannot
cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact
Silent Knight 7550 Meridian Circle Suite 100, Maple Grove, Mn 553694927.
Phone: (800) 328-0103, Fax: (763) 493-6475.
MADE IN AMERICA
P/N 350052
© 2008 Honeywell International Inc.