Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Universal Port Resource Pooling for Voice and Data Services Feature History Release Description 12.2(2)XA This feature was introduced on the Cisco AS5350 and AS5400. 12.2(2)XB1 This feature was implemented on the Cisco AS5850 platform. 12.2(11)T This feature was integrated into Cisco IOS Release 12.2(11)T and support was added for the Cisco AS5350, Cisco AS5400, and Cisco AS5850 platforms. This document describes the Universal Port Resource Pooling for Voice and Data Services feature and includes the following sections: • Feature Overview, page 1 • Supported Platforms, page 3 • Supported Standards, MIBs, and RFCs, page 4 • Configuration Tasks, page 4 • Command Reference, page 7 • Glossary, page 9 Feature Overview With Cisco Resource Pool Manager (RPM), telephone companies and Internet service providers (ISPs) can share dial resources for wholesale and retail dial network services in a single network access server (NAS) or across multiple NAS stacks. Call management and call discrimination can be configured to occur before the call is answered, and customers are differentiated by using configurable customer profiles that are based on the dial number identification service (DNIS) and call type determined at the time of an incoming call. As a result, Cisco RPM enables service providers to count, control, and manage resources and provide accounting for shared resources when implementing different service-level agreements. Cisco IOS Release 12.2(2)XB and Cisco 12.2(11)T 1 Feature Overview The Universal Port Resource Pooling for Voice and Data Services feature now enables service providers to mix voice and data services using resource pool management. With the implementation of the new voice command in resource-pool profile service configuration mode, a resource group with voice service is designated under a particular customer profile, and voice resource pool service is enabled after resouce pool management is configured. Cisco RPM can be configured in one or more standalone Cisco NASs or, optionally, across multiple NAS stacks by using one or more external Cisco Resource Pool Manager Servers (RPMSs). This document presents the single, standalone NAS version of Cisco RPM. For more information about Cisco RPMS, see the Cisco Resource Pool Manager Server Solution Guide. Benefits The Universal Port Resource Pooling for Voice and Data Services feature provides the following benefits: • Mix voice and data services in a single access server or stack of servers using resource pool management. • Manage customer use of shared resources. • Offer advanced wholesale dial-up services directly to customers. Because the PPP and AAA feature sets are selected by the incoming DNIS, the service provider no longer needs tunneling technology to provide unique service-level agreements to wholesale dial customers. • Efficiently use resource groups to offer differing over-subscription rates and dial service-level agreements. • Accept or reject a call based on the incoming DNIS number before answering the call. • Include local retail dial services in the same NAS with the wholesale dial customers. • For voice calls, resource pool management is done only for incoming calls (calls from PSTN legs). For outgoing voice calls, resources are allocated only from the default system resource group. • Mixing of voice DNIS numbers and data DNIS numbers within the same DNIS group in resource pool management is not allowed. • The same DNIS cannot be used for both voice and data calls in resource pool management. • Modem pooling and resource pool management are not compatible. Restrictions Related Features and Technologies • Authentication, authorization, and accounting (AAA) • Point-to-Point Protocol (PPP) • Virtual Private Dialup Network (VPDN) Cisco IOS Release 12.2(2)XB and Cisco 12.2(11)T 2 Supported Platforms Related Documents • Cisco Resource Pool Manager Server Configuration Guide • Cisco Resource Pool Manager Server Installation Guide • Cisco Resource Pool Manager Server Solutions Guide • Release Notes for Cisco Resource Pool Manager Server, Release 1.0 • Resource Pool Management • Resource Pool Management with Direct Remote Services Supported Platforms • Cisco AS5350 universal gateway • Cisco AS5400 universal gateway • Cisco AS5850 universal gateway Table 1 Cisco IOS Release and Platform Support for this Feature Platform 12.2(2)XA 12.2(2)XB1 12.2(11)T Cisco AS5350 X Not supported X Cisco AS5400 X Not supported X Cisco AS5850 Not supported X X Determining Platform Support Through Cisco Feature Navigator Cisco IOS software is packaged in feature sets that support specific platforms. To get updated information regarding platform support for this feature, access Cisco Feature Navigator. Cisco Feature Navigator dynamically updates the list of supported platforms as new platform support is added for the feature. Cisco Feature Navigator is a web-based tool that enables you to determine which Cisco IOS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or release. Under the release section, you can compare releases side by side to display both the features unique to each software release and the features in common. To access Cisco Feature Navigator, you must have an account on Cisco.com. If you have forgotten or lost your account information, send a blank e-mail to [email protected]. An automatic check will verify that your e-mail address is registered with Cisco.com. If the check is successful, account details with a new random password will be e-mailed to you. Qualified users can establish an account on Cisco.com by following the directions at http://www.cisco.com/register. Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL: http://www.cisco.com/go/fn Cisco IOS Release 12.2(2)XB and Cisco 12.2(11)T 3 Supported Standards, MIBs, and RFCs Availability of Cisco IOS Software Images Platform support for particular Cisco IOS software releases is dependent on the availability of the software images for those platforms. Software images for some platforms may be deferred, delayed, or changed without prior notice. For updated information about platform support and availability of software images for each Cisco IOS software release, refer to the online release notes or, if supported, Cisco Feature Navigator. Supported Standards, MIBs, and RFCs Standards No new or modified standards are supported by this feature. MIBs No new or modified MIBs are supported by this feature. To obtain lists of MIBs supported by platform and Cisco IOS release and to download MIB modules, go to the Cisco MIB website on Cisco.com at http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml. RFCs No new or modified RFCs are supported by this feature. Prerequisites Because Cisco RPM differentiates customers through configured customer profiles based on the DNIS and call type determined at the time of an incoming call, the following components of resouce pool management must be configured before enabling voice resource pool service: • Customer Profile Types • Call Types • DNIS Groups • Resource Groups • Resource Services For more information about configuring resouce pool management, see Configuring Resource Pool Management. Configuration Tasks See the following sections for configuration tasks for this feature. Each task in the list is identified as either required or optional. • Confirming Voice Resource Pool Service Availability (optional) • Enabling Voice Resource Pool Service (required) • Verifying Voice Resource Pool Service (optional) Cisco IOS Release 12.2(2)XB and Cisco 12.2(11)T 4 Configuration Examples Confirming Voice Resource Pool Service Availability To confirm voice resource pool service availability, use the following commands, beginning in global configuration mode: Command Purpose Step 1 Router(config)# resource-pool profile service voip Enters profile service configuration mode. Step 2 Router(config-service-profile)# ? Displays profile service configuration mode options. Enabling Voice Resource Pool Service To configure voice resource pool service, use the following commands, beginning in service profile configuration mode: Step 1 Command Purpose Router(config-service-profile)# voice Enables voice resource pool service. Verifying Voice Resource Pool Service Step 1 Enter the show running-config command in privileged EXEC mode. If the “resource-pool profile service voip voice” string is displayed, voice resource pool service is enabled. Router# show running-config ... resource-pool enable ! resource-pool group resource voip-rg range port 3/1 3/15 ! resource-pool profile customer cp-voice limit base-size all limit overflow-size 0 resource voip-rg speech service voip dnis group dnis-voip ! resource-pool profile service voip voice ! dialer dnis group dnis-voip number 526 number 522 number 525x call-type cas speech ... Configuration Examples This section provides the following configuration examples: • Confirming Voice Resource Pool Service Availability Example Cisco IOS Release 12.2(2)XB and Cisco 12.2(11)T 5 Configuration Examples Configuring Voice Resource Pool Service Example • Confirming Voice Resource Pool Service Availability Example In the following example, the help feature is used in profile service configuration mode to confirm that voice resource pool services can be configured. Router(config)# resource-pool profile service voip Router(config-service-profile)# ? Service Profile Configuration Commands: default Set a command to its defaults exit Exit from resource-manager configuration mode help Description of the interactive help system modem Configure modem service parameters no Negate a command or set in its defaults voice Configure voice service parameters Configuring Voice Resource Pool Service Example In the following example, DNIS is assigned with leading digits of 522, 525x, and 526 to a DNIS group named “dnis-voip,” and voice resource pool service is enabled. Router(config)# dialer dnis group dnis-voip Router(config-dnis-group)# number 525x Router(config-dnis-group)# number 522 Router(config-dnis-group)# number 526 Router(config-dnis-group)# call-type cas speech Router(config-dnis-group)# exit Router(config)# resource-pool group resource voip-rg Router(config-resource-group)# range port 3/1 3/15 Router(config-resource-group)# exit Router(config)# resource-pool profile service voip Router(config-service-profile)# voice Router(config-service-profile)# exit Router(config)# resource-pool profile customer cp-voice Router(config-customer-profile)# resource voip-rg speech service voip Router(config-customer-profile)# dnis group dnis-voip Note For more information about using wildcards in DNIS profiles, see “Configuring DNIS Groups” in Configuring Resource Pool Management. Cisco IOS Release 12.2(2)XB and Cisco 12.2(11)T 6 Command Reference Command Reference This section documents the new voice command. All other commands used with this feature are documented in the Cisco IOS Release 12.2 command reference publications. • voice Cisco IOS Release 12.2(2)XB and Cisco 12.2(11)T 7 voice voice To enable voice resource pool services for resource pool management, use the voice command in service profile configuration mode. To disable voice services, use the no form of this command. voice no voice Syntax Description There is no syntax for this command. Defaults Disabled Command Modes Service profile configuration mode Command History Release Modification 12.2(2)XA This command was introduced on the Cisco AS5350 and AS5400. 12.2(2)XB1 This command was implemented on the Cisco AS5850 platform. 12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and support was added for the Cisco AS5350, Cisco AS5400, and Cisco AS5850 platforms. Examples The following example shows that voice service is available and enables voice resource pool service using the voice command in service profile configuration mode: Router(config)# resource-pool profile service voip Router(config-service-profile)# ? Service Profile Configuration Commands: default Set a command to its defaults exit Exit from resource-manager configuration mode help Description of the interactive help system modem Configure modem service parameters no Negate a command or set in its defaults voice Configure voice service parameters Router(config-service-profile)# voice Command History Command Description resource-pool enable Enables resource pool management. resource-pool profile service voip Defines the VoIP service profile for resource pool management. Cisco IOS Release 12.2(2)XB and Cisco 12.2(11)T 8 Glossary Glossary AAA—authentication, authorization, and accounting. DNIS—Dialed Number Identification Service. Telephone service that identifies for the receiver of a call the number that the caller dialed. DSP—Digital Signal Processor. NAS—network access server. Cisco platform or collection of platforms, such as an AccessPath system, that interfaces between the packet world (for example, the Internet) and the circuit world (for example, the PSTN). PPP—Point-to-Point Protocol. Successor to SLIP that provides router-to-router and host-to-network connections over synchronous and asynchronous circuits. Whereas SLIP was designed to work with IP, PPP was designed to work with several network layer protocols, such as IP, IPX, and ARA. PPP also has built-in security mechanisms, such as CHAP and PAP. PPP relies on two protocols, LCP and NCP. PSTN—Public Switched Telephone Network. General term referring to the variety of telephone networks and services in place worldwide. Sometimes called POTS. RPM—Resource Pool Manager. RPMS—Resource Pool Manager Server. SLIP—Serial Line Internet Protocol. Standard protocol for point-to-point serial connections using a variation of TCP/IP. Predecessor of PPP. VPDN—virtual private dialup network. Note For a list of other internetworking terms, see the Internetworking Terms and Acronyms document available on the Documentation CD-ROM and Cisco.com at the following URL: http://www.cisco.com/univercd/cc/td/doc/cisintwk/ita/index.htm. Cisco IOS Release 12.2(2)XB and Cisco 12.2(11)T 9