Download Exhibition 04-2017

Exhibition 04-2017
New Raw Materials and Actives for in-cosmetics
Visit us in London at booth GG40!
DERMAGENIST™
Revitalizes the skin’s beauty potential
The beauty potential of our skin is locked deep within our cells, in their
genetic makeup. Fibroblasts are responsible for synthesizing vital components of the dermis, and are therefore essential contributors to the
youthful appearance of our skin.
DERMAGENIST™ furthermore increases pro-collagen synthesis and stimulates key proteins that play an important role in the functionalization of connective tissue. Extracellular spaces are refilled with a functional, three-dimensional collagen network (see Fig. 3).
Our lifestyles can change this potential and accelerate the aging process through an epigenetic mechanism. While the fibroblasts’ genetic
code does not directly change under negative environmental influences, certain parts of their DNA are shut down when a specific enzyme is activated (DNMT3a). As a result, several gene sequences in
the fibroblasts are no longer read out, protein production is halted, and
skin cell vitality declines.
With the discovery of DERMAGENIST™, a way has been found to protect
skin against this undesired epigenetic gene silencing, by inhibiting DNMT3a enzyme activity (see Fig. 1). The result is a reactivation of LOXL
genes (see Fig. 2). The LOXL enzyme plays an important role in the functionalization of connective tissue fibres.
DNMT 3a methylation: luciferase activity
(%relative to untreated)
120%
100%
–30%
80%
*
60%
student test
* p < 0.05
** p < 0.01
40%
20%
0%
Untreated
Control
DERMAGENISTTM
0.065%
Fig 1: DERMAGENIST™ inhibits DNA methylation by reducing activity of the enzyme DNMT3a
LOXL 1 mRNA level (vs untreated control)
2.5
2
1.5
+66%
1
*
n=3
Mean ± SEM
student test versus
untreated control
* p < 0.05
0.5
0
Untreated
Control
DERMAGENISTTM
0.065%
Fig 2: DERMAGENIST™ reactivates LOXL gene transcription by 66%.
The gene is reactivated and can be “read” once again
2
Untreated control
Vitamin C
DERMAGENIST TM 0.04%
Fig 3: DERMAGENIST™ fills extracellular space with a 3D collagen
network (grey marking)
Another important way in which DERMAGENIST™ improves skin elasticity is by stimulating the synthesis of actin, a key structural protein that
reinforces the cytoskeleton of fibroblasts. The cells are revitalized and
become more contractile.
Two clinical trials have been performed. Twice daily over a period of 56
days, 30 women aged between 40 and 65 treated one half of the face
with 0.4% DERMAGENIST™ and the other half of the face with a placebo
formulation. The skin density was determined using high-resolution
ultrasonic measurement. An 18% increase in skin density in the
cheek area was observed after 56 days. Furthermore, skin firmness was
determined by a score system. There was an observed improvement in
skin firmness of 10% after 56 days and 15% after 84 days.
DERMAGENIST™ is extracted from marjoram leaves. A special method
ensures the active ingredient is rich in polyphenols, vicenin and luteolin7-0-glucuronide.
DERMAGENIST TM:
• Protects against epigenetic modification of DNA; reduces gene
silencing
• Reactivates the gene expression of extracellular matrix components
• Vitalizes fibroblasts
• Improves the neo-collagen network
Skin care applications:
• Anti-aging
• “Epi-protector”
• “Cell tonic” technology
• Tightness
• Improved skin density
DERMAGENIST™ PW BC10004
INCI: Maltodextrin (and) Origanum Majorana Leaf Extract
Appearance: White to beige powder
Preservatives: None
Application concentration: 0.2–0.4%
DERMAGENIST™ is a trademark of BASF
RELIPIDIUM™
Rebalances the skin microflora
RELIPIDIUM™ restores balance to the skin’s microflora. RELIPIDIUM™ is a
modified yeast extract that boosts lipid metabolism and strengthens
the natural skin barrier. RELIPIDIUM™ stimulates the production of
sphingolipids, ceramides and cholesterol sulphate. A volunteer trial confirmed a moisturizing effect and strengthening of the skin barrier (TEWL
measurement).
A second volunteer study showed that RELIPIDIUM™ restores the balance between Staphylococcus epidermidis and Staphylococcus aureus. Dry skin is characterized by an elevated population of S. aureus.
RELIPIDIUM™ rebalances the skin microflora.
RELIPIDIUM™ A00265
INCI: Hydrolyzed Yeast Protein (and) Butylene Glycol (and) Pentylene Glycol
Appearance: Yellow liquid
Preservatives: None
Application concentration: 1–3%
RELIPIDIUM™ is a trademark of BASF
RELIPIDIUM™ is able to balance out the ratio of pathogenic germs. It
does so by activating the TLR-2 and dectin-1a receptors in the skin. These keratinocyte receptors recognize foreign organisms and activate the
immune system. RELIPIDIUM™ increases the production of TLR-2 and
dectin-1a.
OLIGOLIN™
The multifunctional rejuvenation cure
As we age, our skin and the dermoepidermal junction (DEJ) become
thinner, and our skin density declines. The skin gradually loses its firmness and dries out. What is needed is a multifunctional care solution.
With the development of OLIGOLIN™, our partner BASF in cooperation
with the University of Reims has succeeded in translating the beneficial properties of linseed, known for so long already in traditional and
Ayurvedic medicine, to skin.
OLIGOLIN™ is a hydrolyzed extract of linseed that contains a high concentration of oligosaccharides. OLIGOLIN™ restructures the epidermis, the dermoepidermal junction and the dermis, making it a truly
multifunctional active. The thickness of the epidermis is significantly
increased, and the formation of involucrin and filaggrin stimulated.
By improving type IV collagen formation, the dermoepidermal zone
is restructured. Regeneration of the dermis is achieved by improving
fibroblast proliferation and migration. Stimulation of collagen-I, collagen-II and GAG synthesis and lumican expression has been demonstrated in vitro. Enzymes that attack the basic dermal substance
are inhibited, for example hyaluronidase and heparanase.
The oligosaccharides from OLIGOLIN™ positively influence the tissue
structure of the skin, and counteract the natural aging process. The
epidermis thickens, the tonicity of the DEJ strengthens and the dermis
becomes denser.
A placebo-controlled trial was conducted in which 26 volunteers with
dry skin applied 1% OLIGOLIN™ over a period of 28 days. An 11%
increase in skin moisture was observed (see Fig. 4).
%/ Day 0
14
12
10
8
6
4
2
0
Day 0
*
NS
Placebo
OLIGOLINTM 1%
Fig 4: Clinical trials with 26 women (aged 18–65) with dry skin on
the forearms (Corneometer measurement)
In another study with 22 volunteers (aged between 53 and 65 years), an
improvement in skin elasticity was observed after 28 days (see Fig. 5).
(**) / PI
%/ Day 0
15
12%
13,8%
5
NS
0
Tag 0
**
10
OLIGOLIN™ BC10028
INCI: Hydrolyzed Linseed Extract
Appearance: Beige-coloured powder
Preservatives: None
Application concentration: 1%
OLIGOLIN™ is a trademark of BASF
11%
Percentage on 26 volunteers
Student test
NS = not significant
* p < 0.05
Placebo
Percentage on 22 volunteers
Student test
NS = not significant
** p < 0.01
OLIGOLINTM 1%
Fig 5: Clinical trial with 22 women (aged 53–65) with slack skin in
the face area (Dynaskin® method)
3
NEUROCOSMETICS
Revolutionizing cosmetics
GIVAUDAN presents three effective actives from its neurocosmetics
concept that positively affect the skin feel and skin balance:
• MARILIANCE lowers the skin’s irritation threshold by inhibiting the
formation of pain receptors
• ÔCALINE XP effectively inhibits histamine release and thus soothes
the skin
• NEUROPHROLINETM reduces cortisol production and counteracts
skin stress
MARILIANCE – neurocutaneous balance
The natural high-tech active MARILIANCE (Water, Propanediol, Rhodosorus Marinus Extract) is obtained from the alga Rhodosorus marinus.
This red microalga originates in the warm waters of the French Antilles. New research results at universities show that there is a correlation
between longevity and reduced expression of pain receptors. Could this
newly discovered correlation be the new key to youth?
MARILIANCE inhibits the formation of the pain receptor TRPV1 in vitro
under inflammatory stress conditions. In a placebo-controlled clinical trial involving 46 volunteers with reactive skin, a significant reduction of
cutaneous sensitivity was already achieved after 14 days (stinging test
with capsaicin).
ÔCALINE XP – suitable for sensitive skin
A complex of actives from pumpkinseed extract in combination with
a marine active water (Maris Aqua, Aqua, Cucurbita Pepo Seed Extract,
Benzyl Alcohol, Potassium Sorbate, Citric Acid), ÔCALINE XP inhibits histamine release triggered by substance P.
In two clinical trials, a reduction of erythema formation and roughness
was demonstrated already 60 minutes after applying ÔCALINE XP, and a
42% reduction of skin reactivity after 2 weeks.
4
***
4
***
–24%
3
Reactivity score
Neurocosmetics represents the second generation of “wellbeing” cosmetics, which are strikingly different from classical care concepts for sensitive skin. Active ingredient research for sensitive skin is concentrating
increasingly on studying complex neurocutaneous relationships. It is
known that not only neurons but also skin cells are capable of synthesizing and excreting neurotransmitters and expressing the corresponding receptors. The release of these messengers – many of which are
neuropeptides – is triggered by physical, chemical or even emotional
stimuli, and has a considerable influence on how our skin feels.
–42%
Skin sensitivity
threshold
*** p < 0.001
2
1
D0
D7
Time (days)
D14
Fig 6: In a stinging test on 20 volunteers, 5% ÔCALINE XP reduced
skin reactivity by 24% after 7 days and by 42% after 14 days
NEUROPHROLINETM – skin stress control
This extract of wild indigo (Water, Propanediol, Tephrosia purpurea
seed extract) exhibits the following effects:
• In vitro: reduces cortisol production in the event of skin stress by
up to 70%, increases β-endorphin production by up to 163% and
activates anti-stress genes
• In vivo: increases skin radiance of the volunteers with stressed skin
by up to 57%, reduces skin reddening of stressed skin by a factor of
2.4, and improves the visible signs of tiredness (eye circles)
Before treatment
After treatment
Fig 7: NEUROPHROLINE reduces the signs of stressed and tired
skin after one month, dark eye circles can be reduced
TM
MARILIANCE
INCI: Water, Propanediol, Rhodosorus Marinus Extract
Appearance: Clear liquid
Preservatives: None
Application concentration: 1–3%
ÔCALINE XP
INCI: Maris Aqua, Aqua, Cucurbita Pepo Seed Extract, Benzyl Alcohol, Potassium Sorbate, Citric Acid
Appearance: Clear, yellow liquid
Preservatives: Benzyl Alcohol, Potassium Sorbate
Application concentration: 3–10%
Certificates: ECOCERT compliant
NEUROPHROLINETM
INCI: Water, Propanediol, Tephrosia purpurea seed extract
Appearance: Clear, yellow liquid
Preservatives: None
Application concentration: 0.1–2%
MARILIANCE, ÔCALINE XP UND NEUROPHROLINE TM are
GIVAUDAN products
P O LY H E L I X A N P F
Rich complex for skin regeneration
The active ingredient POLY HELIXAN PF is obtained from the harvested secretion of the Burgundy snail. Over its 600 million years of
existence, this European snail species has demonstrated a remarkable
adaptability to perpetually changing environmental factors. One of the
reasons for this snail’s resilience resides in the secretion it produces.
This secretion both protects the snail’s body from external influences
and promotes the healing of wounds.
The active ingredient POLY HELIXAN PF is a rich complex of different
active agents for skin regeneration.
Composition of POLY HELIXAN PF:
• Mucopolysaccharides: moisturizing effect
• Proteolytic enzymes: support the protease/anti-protease balance
• Collagen and elastin: components of connective tissue
• vitamins A, C and E: stimulate collagen synthesis and skin regeneration
• Allantoin: stimulates skin regeneration and has regenerative and
anti-inflammatory effects
Before treatment
After treatment
Fig 8: POLY HELIXAN PF shows visible improvements of scars after
30 days
POLY HELIXAN PF
INCI: Snail Secretion Filtrate, Phenoxyethanol
Appearance: Pale yellow liquid
Preservatives: Phenoxyethanol
Application concentration: 2–5%
POLY HELIXAN PF is a COBIOSA product
The effectiveness POLY HELIXAN PF was studied in an in-vivo trial with
15 volunteers aged 13 to 55, who all had scars. A cosmetic formulation
containing 5% POLY HELIXAN PF was applied twice daily in the scar
area.
After 30 days of application, the results were evaluated in comparison
to the initial situation. Skin elasticity was measured by Cutometer and
skin moisture content was measured by Corneometer. The scars were
assessed by video microscopy. Analysis revealed that skin elasticity
had increased by 32% and skin moisture had increased by 17%.
Furthermore, a visible improvement of the scars was observed after
30 days of treatment (see Fig. 8).
IBR-SNOWFLAKE®
An extract of summer snowflake for hot days
The extract IBR-SNOWFLAKE® is obtained from the dormant bulb of
the summer snowflake. The active components contained are socalled dormins, which are inhibitors of cell proliferation. New studies
show that, in addition to its known wrinkle-smoothing effect, IBRSNOWFLAKE® is able to lower perspiration, and thus has an antiperspirant effect. IBR-SNOWFLAKE® also reduces spontaneous muscle
contraction. IBR-SNOWFLAKE® was therefore tested in these applications as a direct comparison with Botox® in treating excessive sweating
(hyperhidrosis).
The in-vivo double-blind study involved 24 female volunteers with
heavy perspiration in the armpit area. Initially, evaporation was measured in both armpits. 1% IBR-SNOWFLAKE® in a cream formulation was
then applied twice daily to the armpit area over a period of one week.
Cotton balls were inserted for a standardized time in the armpit and
weighed before and after insertion into the armpit in order to determi-
ne the amount of sweat produced. This measurement was performed
under standardized sweat-inducing conditions (temperature and humidity). Under these test conditions, a significant 36% reduction of
perspiration after applying 1% IBR-SNOWFLAKE® was demonstrated
versus the initial state.
IBR-SNOWFLAKE®
Trade name: IBR-SNOWFLAKE® all natural 1003
INCI: Glycerin, Water, Leucojum Aestivum Bulb Extract
Appearance: Slightly viscous liquid
Colour: Pale yellow to brownish
Odour: Characteristic
Certification: COSMOS compliant
IBR-SNOWFLAKE® all natural 1003 is a trademark of IBR
5
F R E S H S TAT TM
Effective antimicrobial additive
FRESHSTAT TM (40% cetylpyridinium chloride in propylene glycol) is a
safe and versatile, surface-active, cationic additive with antimicrobial action. Already at low application concentrations of around 0.25%,
FRESHSTAT TM exhibits very high efficacy against gram positive and
gram negative bacteria and against fungi, making it a possible alternative to parabens, triclosan, isothiazolinones, and formaldehyde-splitting substances in leave-on and rinse-off formulations.
The European Scientific Committee on Consumer Safety (SCCS) has
positively rated FRESHSTAT™ for use as an antimicrobial additive in cosmetics (Positive SCCS Opinion 0985/06).
FRESHSTAT™ exhibits excellent effectiveness against the bodyodour-producing bacteria Corynebacterium jeikeium and Corynebacterium xerosis, and is therefore suitable for use in deodorizing
products such as roll-on, stick or soap deodorants.
Properties:
• Cationic co-surfactant, antistatic
• Broad spectrum activity already at low application concentrations
(0.25% of the 40% product)
• Biodegradable (OECD 307)
• Stable over a wide pH range (pH 4–10)
• Temperature stable up to 100 °C
• Easy to work into formulations
•
•
•
•
FRESHSTAT™ is soluble in water and other polar solutions
Booster effect when used with 0.1% EDTA
No negative impact on the viscosity of the final product
Not compatible with xanthan gum or anionic rinse-off systems
(SLES)
The colourless and odourless raw material is produced under cGMP conditions.
Human safety:
• FRESHSTAT TM is US FDA approved and has approval for oral care applications
• Positive SCCS opinion (0985/06 for use as an antimicrobial additive
in cosmetics)
• The product causes no skin irritations at a tested application concentration of 0.5% (HRIPT 100 people 0.5% CPC in an O/W face care
application)
FRESHSTAT™
INCI: Cetylpyridinium Chloride and Propylene Glycol
Appearance: Clear liquid
Recommended application concentration: 0.25%–0.75%
Certificates: cGMP, FSSC 22000, kosher and halal available
Formulation: At the end of the production process
FRESHSTAT™ is a Vertellus product
I S O P E N T Y L D I O L (IPD)
Versatile emollient
IPD – a product of our new partner KURARAY – is an innovative multitalent for use in personal care applications. This water-soluble solvent improves the sensory profile of finished products and creates a smooth,
non-sticky feel. The product is capable of solubilizing even troublesome actives such as glycyrrhetinic acid or Boswellia serrata extract, and
allows the use of hydrophilic substances in water-free and lipophilic
substances in water-based systems. Adding IPD to perfume oils allows
the alcohol content to be significantly reduced, and allows the development of milder perfume or body sprays that stand out for a good
feel.
When IPD is worked into the water phase of an O/W emulsion, a more
even distribution and reduction of droplet sizes is observed, which positively affects the stabilizing properties of an O/W emulsion.
IPD has good wetting properties, as proven in tests with silica, iron pigments and mineral UV filters such as titanium dioxide.
5% IPD worked into a compact powder formulation significantly improves elasticity, application characteristics and breakage resistance, while lipstick formulations can be optimized in terms of pay-off
and shine effect with 2.5–3%.
Combination with sorbitol creates synergistic effects to reveal both
moisturizing properties and a repairing action in tests on damaged hair.
6
Fig 9: Before treatment with
5% IPD + 5% sorbitol
Fig 10: After treatment with
5% IPD + 5% sorbitol
Comparing the micrographs of a hair shaft treated for 30 minutes with
a 5% IPD and 5% sorbitol solution, a significant improvement in the
hair structure can be seen (see Figs. 9 and 10). IPD is excellent for use in
hair masks to improve hair shine and produce a softer, more groomed
feeling to the hair.
ISOPENTYLDIOL (IPD)
INCI: Isopentyldiol
Appearance: Transparent, slightly viscous liquid
Recommended application concentration: 2%–10%
ISOPENTYLDIOL (IPD) is a Kuraray product
F U C O R E V E R S E TM
Anti-aging from the Breton coast
The seaweed off the coast of Brittany is exposed to strong ocean currents, frequent storms and the rough waves to come with it. In the
course of their evolution, however, these plants have adapted perfectly
to these extreme climatic conditions.
A source of their resistance is the fucoidans incorporated into the cell
walls. These give the plants additional sturdiness, allowing the seaweed
to maintain its integrity even in rough conditions.
The company Lessonia has isolated the key molecule of fucoidans, called
fucose, and offers this as an active ingredient. Given the very low molecular weight of the active, FUCOREVERSETM can penetrate rapidly into the
skin.
In an in-vitro test, it was proven that the active ingredient stimulates
collagen-I synthesis and fibroblast proliferation. To test this, a 0.15% solution of FUCOREVERSETM was added to the culture medium. Compared
to the placebo control, collagen-I synthesis increased by 23.7%, and
fibroblast proliferation by 35.5% (see Fig. 11).
The anti-wrinkle effect was studied in a subsequent clinical trial. The
trail was carried out with 42 women of Caucasian skin type over a period of 28 days. The volunteers applied a formulation containing 1.5 %
FUCOREVERSE TM and a placebo formulation for comparison in the area
around the eyes. For better comparability, the trial was conducted as
a half-face test.
After the duration of the trial, a significant 9.1% reduction in crow’s
feet depth was observed versus the placebo formulation.
The measurements were taken by non-contact 3D measurement (LIFEVIZ Micro method), (see Fig. 12).
4%
2.8%
2%
–6.3%
0%
–2%
p < 0.05 Student test
9.1%
–4%
50%
+35.5%
40%
+23.7%
30%
–8%
20%
10%
0%
0%
Untreated
Cells
0.15%
Collagen I
Synthese
–6%
0.15%
Fibroblasten
Proliferation
Fig 11: Addition of 0.15% FUCOREVERSETM exhibits an increase in
collagen-I synthesis by 23.7% and fibroblast proliferation by 35.5%
versus an untreated cell culture
Placebo
D 28 Mean value
Fig 12: A 1.5% FUCOREVERSETM formulation significantly reduces
crow’s feet in the eye area by 9.1% after application over 28 days
The active ingredient is worked in at the end of the formulation process
in the cold phase (below 40 °C).
FUCOREVERSE™
INCI: Aqua, Hydrolyzed F-Fucoidan, Benzyl Alcohol, Dehydroacetic Acid
Appearance: Pale yellow liquid
Preservatives: Benzyl Alcohol, Dehydroacetic Acid
Application concentration: 1.5%
FUCOREVERSE™ is a Lessonia product
M I C R O S I LV E R B G TM
Dermatological skin care with biologically active, natural microsilver
Originally developed for technical applications, MICROSILVER BG™ is the
culmination of 15 of research at the Fraunhofer Institute. The patented
manufacturing process uses exclusively pure metallic silver, from which
MICROSILVER BG™ is produced with its special sponge-like surface
structure. This structure creates a giant surface area that allows ample
release of silver ions over a prolonged period (depot effect).
MICROSILVER BG™ has a very diverse range of applications, due to its
broad spectrum of action. The active destroys germs and microorganisms on the skin surface. The skin’s appearance is rapidly restored and normalized. MICROSILVER BG™ supports the skin’s natural
healing process, soothes sore and irritated skin and destroys odourforming bacteria.
Due to its size, MICROSILVER BG™ does not penetrate into the epidermis, rather it deposits mainly in the wrinkles of the skin.
MICROSILVER BG™ is a natural product manufactured in a purely physical process without the use of solvents or other chemical substances.
It carries the ECOCERT and COSMOS organic seals and a Nano-Free logo.
MICROSILVER BG™
INCI: SILVER (CI 77820)
Appearance: Pure, silver-coloured powder
Recommended application concentration: 0.1–0.2%
Certificates: ECOCERT, COSMOS, NaTrue compliant, non-nano
MICROSILVER BG™ is a BioEpiderm product
7
WAT E R D R O P S I L - D A N D S J 3 0 0
K-Beauty inspirations
In recent years, there has been a growing presence of South Korea in
the beauty industry. Ever since the most popular beauty product from
South Korea – BB cream – captured the European market, many innovative formulation concepts have evolved into a megatrend. The often
lovingly and playfully presented cosmetic products include innovative
creams, serums, cleansing milks, and highly innovative deco products.
Formulation Sunjin: Milk Drop BB cream with WaterDropSil-D
SJF-1609_Milk drop BB cream_ver1.0
Phase
A
The range is very different from products originating from Europe and
the USA. The selection is simply huge. The ingredients are unique.
The textures are highly innovative. The packaging is eccentric and
highly diversified. It is little wonder when one considers how much
South Koreans will invest in a groomed appearance. 50% of the total
turnover in the beauty market is generated through skin care products.
Right in line with the K-Beauty and Skin Food trends, we present the
Chef’s Selection of our Korean partner SUNJIN.
These textures are based on the silicone emulsifier WATERDROPSIL-D,
which produces W/Si emulsions. The water of the emulsion is enclosed
and stabilized inside macromicelles. When applied on skin, the emulsion breaks up into little water drops. The formulation thus feels light
and fresh when applied. Within a few seconds, tiny water drops
appear that are absorbed into the skin just moments later, guaranteeing a WOW effect! The wearer experiences an immediate feeling of
moisture and freshness.
B
Discover a unique feel on the skin with a selection of formulations from
the “Chief‘s selection textures”, which we will provide you with upon request: Water Drop Cream, Water Drop Milk Cream, Green Tea Drop
Cream, Water Drop BB Cream, Whipping Cream, Custard Dream,
Ice Sherbet, Ice Cream.
INCI
C
D
E
%
WaterDropSil-D
Dimethicone & Dimethicone/Vinyl Dimethicone Crosspolymer & PEG-10 Dimethicone
5
DC 556
Phenyltrimethicone
2,5
Xiameter PMX 200/2cs
Dimethicone
3
DC 200F 10CS
Dimethicone
1
ABIL EM 90
Cetyl PEG/PPG-10/1 Dimethicone
0,6
KSG 16
Cyclopentasiloxane (and) Dimethicone/Vinyl
Dimethicone Crosspolymer
1
SUNZNO-NAS
Zinc Oxide & Triethoxycaprylylsilane
5,75
Xiameter PMX 200/2cs Dimethicone
The product SJ300 was developed to achieve a water drop effect in
W/O emulsions.
These new ingredients give rise to a highly diverse range of possibilities. The formulation can be designed to make the water drop interact
with pigments to create special effects, for example: white “milk droplets” that lighten the complexion; green or blue droplets for a
fresh kick, combined with a cooling ingredient to amplify the effect
even further. Adding waxes creates melting textures with a sherbet
character or fluffy products of the “whipped cream” variety.
Trade Name
4,25
SUNTITAN-AS
Titanium dioxide & Alumina & Triethoxycaprylsilane
3,5
SUNSIL 130SC
Silica & Methicone
0,5
SUNMICA LL
Mica & Lauroyl Lysine
0,6
SUNIOY AS
Yellow Iron Oxide & Triethoxy caprylylsilane
0,44
SUNIOR AS
Red Iron Oxide & Triethoxy caprylylsilane
0,16
SUNIOB AS
Black Iron Oxide & Triethoxy caprylylsilane
0,2
EDTA-2NA
Disodium EDTA
0,03
NaCl
Sodium chloride
0,7
Glycerin
Glycerin
1
1,3-BG
Butylene glycol
1
Water
Aqua
66,77
SUNSIL Tin-Naturalwhite
Silica & Titanium Dioxide
2,0
WATERDROPSIL-D
INCI: Dimethicone (and) Dimethicone/Vinyl Dimethicone Crosspolymer (and) PEG-10 Dimethicone
Appearance: Clear liquid
Application concentration: 3–7%
SJ300
INCI: Stearic acid (and) Hydrogenated Vegetable Oil (and) Behenyl
Alcohol (and) Cetearyl Alcoholpolymer
Appearance: White, waxy flakes
Application concentration: 3–5%
WATERDROPSIL-D and SJ300 are SUNJIN products
Distributed by
IMPAG Import GmbH
Fritz-Remy-Straße 25
D-63071 Offenbach am Main
Phone: +49 (0) 69 850 008-0
Fax: +49 (0) 69 850 008-90
E-Mail:[email protected]
Web: www.impag.de
IMPAG Group Country Offices
Switzerland/ Zurich – www.impag.ch
Germany / Offenbach – www.impag.de
France / Nancy – www.impag.fr
Poland / Warsaw – www.impag.pl
Austria/ Vienna – www.impag.at
04/ 2017